The accordion technique did not improve bone healing in a mouse model of distraction osteogenesis.

Distraction osteogenesis (DO) is a valuable surgical method for limb lengthening and bone defect correction, but its lengthy consolidation phase presents challenges. The accordion technique (AT), involving compression and distraction of bone segments, has shown potential for enhancing healing. This study aimed to investigate the effectiveness of the AT conducted at three different time points (distraction phase, early consolidation phase, or late consolidation phase) compared to conventional DO in a mouse osteotomy model.

Finite element analysis of distraction osteogenesis with a new extramedullary internal distractor.

Distraction osteogenesis (DO) is a bone regenerative maneuver, which is conventionally done with external fixators and, more recently, with telescopic intramedullary nails. Despite the proven effectiveness, external approaches are intrusive to the patient's life while intramedullary nailing damages the growth plates, making them unsuitable for pediatric patients. An internal DO plate fixator (IDOPF) was developed for pediatric patients to address these limitations.

Zoledronate reduces loading-induced microdamage in cortical ulna of ovariectomized rats.

As a daily physiological mechanism in bone, microdamage accumulation dissipates energy and helps to prevent fractures. However, excessive damage accumulation might bring adverse effects to bone mechanical properties, which is especially problematic among the osteoporotic and osteopenic patients treated by bisphosphonates. Some pre-clinical studies in the literature applied forelimb loading models to produce well-controlled microdamage in cortical bone.

A novel method for assigning bone material properties to a comprehensive patient-specific pelvic finite element model using biplanar multi-energy radiographs.

The increasing prevalence of adult spinal deformity requires long spino-pelvic instrumentation, but pelvic fixation faces challenges due to distal forces and reduced bone quality. Bi-planar multi-energy X-rays (BMEX) were used to develop a patient-specific finite element model (FEM) for evaluating pelvic fixation. Calibration involved 10 patients, and an 81-year-old female test case was used for FEM customization and pullout simulation validation.

A Novel Methodology to Estimate Bone Mechanical Properties Using Dual-Energy Imaging to Improve Pedicle Screw Fixation.

Objective: To develop a methodology to improve the representation of the mechanical properties of a vertebral finite element model (FEM) based on a new dual-energy (DE) imaging technology to improve pedicle screw fixation.

Methods: Bone-calibrated radiographs were generated with dual-energy imaging technology in order to estimate the mechanical properties of the trabecular bone. Properties were included in regions of interest in four vertebral FEMs representing heterogeneity and homogeneity, as a realistic and reference model, respectively.

Differential Regulation of POC5 by ERα in Human Normal and Scoliotic Cells.

Adolescent idiopathic scoliosis (AIS) is a complex three-dimensional spinal deformity. The incidence of AIS in females is 8.4 times higher than in males.

Impact loading intensifies cortical bone (re)modeling and alters longitudinal bone growth of pubertal rats.

Physical exercise is important for musculoskeletal development during puberty, which builds bone mass foundation for later in life. However, strenuous levels of training might bring adverse effects to bone health, reducing longitudinal bone growth. Animal models with various levels of physical exercise were largely used to provide knowledge to clinical settings.

Segmentation of trabecular bone microdamage in Xray microCT images using a two-step deep learning method.

Introduction: One of the current approaches to improve our understanding of osteoporosis is to study the development of bone microdamage under mechanical loading. The current practice for evaluating bone microdamage is to quantify damage volume from images of bone samples stained with a contrast agent, often composed of toxic heavy metals and requiring long tissue preparation. This work aims to evaluate the potential of linear microcracks detection and segmentation in trabecular bone samples using well-known deep learning models, namely YOLOv4 and Unet, applied on microCT images.

Effect of vitamin D on bone morphometry and stability of orthodontic tooth movement in rats.

Introduction: Vitamin D (VitD) maintains bone health and may influence orthodontic tooth movement (OTM). The objective was to evaluate the VitD effect on bone morphometry and the rate and stability of OTM.

Methods: Thirty-two male Sprague Dawley rats were assigned into 2 experimental groups, treated with VitD by gavage (systemic) or injection (local), and 2 respective control groups treated with phosphate-buffered saline for 47 days.

Air leaks: Stapling affects porcine lungs biomechanics.

During thoracic operations, surgical staplers resect cancerous tumors and seal the spared lung. However, post-operative air leaks are undesirable clinical consequences: staple legs wound lung tissue. Subsequent to this trauma, air leaks from lung tissue into the pleural space.

Validation of an in vivo micro-CT-based method to quantify longitudinal bone growth of pubertal rats.

Bone growth is an essential part of skeletal development during childhood and puberty. Accurately characterizing longitudinal bone growth helps to better understand the determining factors of peak bone mass, which has impacts on bone quality later in life. Animal models were largely used to study longitudinal bone growth.

Biomechanical analysis of the number of implants for the immediate sacroiliac joint fixation.

Purpose: The fusion of the sacroiliac joint (SIJ) is the last treatment option for chronic pain resulting from sacroiliitis. With the various implant systems available, there are different possible surgical strategies in terms of the type and number of implants and trajectories. The aim was to quantify the effect of the number of cylindrical threaded implants on SIJ stabilization.

Instrumentation of the sacroiliac joint with cylindrical threaded implants: A detailed finite element study of patient characteristics affecting fixation performance.

The sacroiliac joint (SIJ) is a known pain generator that, in severe cases, may require surgical fixation to reduce intra-articular displacements and allow for arthrodesis. The objective of this computational study was to analyze how the number of implants affected SIJ stabilization with patient-specific characteristics such as the pelvic geometry and bone quality. Detailed finite element models were developed to account for three pelvises of differing anatomy.

Nondestructive Assessment of Growing Rat Tibial Mechanical Properties Under Three-Point Bending: A Microcomputed Tomography Based Finite Element Study.

Microcomputed tomography (micro-CT) based finite element models (FEM) are efficient tools to assess bone mechanical properties. Although they have been developed for different animal models, there is still a lack of data for growing rat long bone models. This study aimed at developing and calibrating voxel-based FEMs using micro-CT scans and experimental data.

In vitro biomechanical properties of sole tissues: Comparison between healthy and ulcerated bovine claws.

Sole ulcers are reportedly one of the most prevalent diseases associated with lameness in dairy cattle, significantly affecting animal welfare and farm profitability. The degree to which sole soft tissues, healthy or ulcerated, are able to maintain their structure and function when subjected to compressive forces remains unknown. Therefore, the aims of the present study were to assess sole tissue biomechanics in healthy and ulcerated claws and to describe correlated histology.

Isolated Cyclic Loading During Adolescence Improves Tibial Bone Microstructure and Strength at Adulthood.

Bone is a unique living tissue, which responds to the mechanical stimuli regularly imposed on it. Adolescence facilitates a favorable condition for the skeleton that enables the exercise to positively influence bone architecture and overall strength. However, it is still dubious for how long the skeletal benefits gained in adolescence is preserved at adulthood.

Biomechanical analysis of two insertion sites for the fixation of the sacroiliac joint via an oblique lateral approach.

Background: The sacroiliac joint is an important source of low back pain. In severe cases, sacroiliac joint fusion is used to reduce pain, but revision rates can reach 30%. The lack of initial mechanical stability may lead to pseudarthrosis, thus not alleviating the patient's symptoms.

Induced pressures on the epiphyseal growth plate with non segmental anterior spine tethering.

Study Design: Experimental biomechanical study of pressures exerted on the epiphyseal growth plates (GP) in tethered porcine cadaveric spines.

Objectives: To experimentally measure the pressure exerted on the vertebral end plates of a tethered porcine spine model. Flexible spine tethering is a novel fusionless surgical technique that aims to correct scoliotic deformities based on growth modulation due to the pressure exerted on vertebral body epiphyseal GP.

CFTR deletion affects mouse osteoblasts in a gender-specific manner.

Advancements in research and care have contributed to increase life expectancy of individuals with cystic fibrosis (CF). With increasing age comes a greater likelihood of developing CF bone disease, a comorbidity characterized by a low bone mass and impaired bone quality, which displays gender differences in severity. However, pathophysiological mechanisms underlying this gender difference have never been thoroughly investigated.

Cyclically controlled vertebral body tethering for scoliosis: an in vivo verification in a pig model of the pressure exerted on vertebral end plates.

Study Design: Experimental in vivo study of the pressure exerted on the spine of a pig by a new cyclic anterior vertebral body tethering (AVBT) prototype.

Objectives: To evaluate the relationship between the tether tension and the pressures transmitted onto the vertebral end plates by a cyclic AVBT prototype. AVBT is a recent surgical technique for the treatment of pediatric scoliosis that compresses the convex side of the spine with a sustained tension, to modulate the growth to progressively correct the deformity over time.

High Impact Exercise Improves Bone Microstructure and Strength in Growing Rats.

Physical activity is beneficial for skeletal development. However, impact sports during adolescence, leading to bone growth retardation and/or bone quality improvement, remains unexplained. This study investigated the effects of in vivo low (LI), medium (MI), and high (HI) impact loadings applied during puberty on bone growth, morphometry and biomechanics using a rat model.

Remote-controlled internal lengthening plate for distraction osteogenesis in pediatric patients.

Objectives: Limb lengthening by distraction osteogenesis is a technique widely used to treat limb length discrepancy resulting from trauma, congenital limb defects and long bone non-union. For decades, patients have resorted to the Ilizarov apparatus, prone to pin tract infections and scarring. Although implantable lengthening nails have reduced the incidence of complications, they are not applicable in pediatric patients with open growth plates.

Adolescent idiopathic scoliosis associated POC5 mutation impairs cell cycle, cilia length and centrosome protein interactions.

Adolescent Idiopathic Scoliosis (AIS) is a spinal deformity that affects approximately 3 percent of human adolescents. Although the etiology and molecular basis of AIS is unclear, several genes such as POC5 have been identified as possible causes of the condition. In order to understand the role of POC5 in the pathogenesis of AIS, we investigated the subcellular localization of POC5 in cilia of cells over-expressing either the wild type (wt) or an AIS-related POC5 variant POC5A429V.