The inverse design of meta-optics has received much attention in recent years. In this paper, we propose a GPU-friendly inverse design framework based on improved eigendecomposition-free rigorous diffraction interface theory, which offers up to 16.2 × speedup over the traditional inverse design based on rigorous coupled-wave analysis.
View Article and Find Full Text PDFHighly doped semiconductor "designer metals" have been shown to serve as high-quality plasmonic materials across much of the long-wavelength portion of the mid-infrared. These plasmonic materials benefit from a technologically mature semiconductor fabrication infrastructure and the potential for monolithic integration with electronic and photonic devices. However, accessing the short-wavelength side of the mid-infrared is a challenge for these designer metals.
View Article and Find Full Text PDFWe demonstrate, experimentally and theoretically, a new class of angle-insensitive band-pass optical filters that utilize anisotropy of plasmonic nanorod metamaterials, in both ε ≃ -1 and epsilon-near-infinity regimes, to minimize dependence of optical path on the incident angle. The operating wavelength and bandwidth of the filter can be engineered by controlling the geometry of the metamaterial. Experimental results are in agreement with full wave numerical and analytical solutions of the Maxwell's equations.
View Article and Find Full Text PDFHyperbolic metamaterials were initially proposed in optics to boost radiation efficiencies of quantum emitters. Adopting this concept for antenna design allows approaching long-standing contests in radio physics. For example, broadband impedance matching, accompanied with moderately high antenna gain, is among the existent challenges.
View Article and Find Full Text PDFWe demonstrate coupling to and control over the broadening and dispersion of a mid-infrared leaky mode, known as the Berreman mode, in samples with different dielectric environments. We fabricate subwavelength films of AlN, a mid-infrared epsilon-near-zero material that supports the Berreman mode, on materials with a weakly negative permittivity, strongly negative permittivity, and positive permittivity. Additionally, we incorporate ultra-thin AlN layers into a GaN/AlN heterostructure, engineering the dielectric environment above and below the AlN.
View Article and Find Full Text PDFParity-time (PT) symmetry breaking in counterintuitive gain/loss coupled waveguide designs is numerically and theoretically investigated. The PT symmetry mode selection conditions are determined theoretically. Single-transverse-mode broadband InAs quantum dot (QD) superluminescent light emitting diodes (SLEDs) are fabricated and characterized; the PT symmetric broad-area SLEDs contain laterally coupled gain and loss PT- symmetric waveguides.
View Article and Find Full Text PDFMetamaterials based on arrays of aligned plasmonic nanowires have recently attracted significant attention due to their unique optical properties that combine tunable strong anisotropy and nonlocality. These optical responses provide a platform for implementation of novel sensing, imaging, and quantum optics applications. Basic building blocks, used for construction of those peculiar composites, are plasmonic metals, such as gold and silver, which have moderate negative values of permittivities at the optical spectral range.
View Article and Find Full Text PDFA typo in the software implementation of Diffractive Interface Theory [Opt. Express23, 2764 (2015)10.1364/OE.
View Article and Find Full Text PDFLight-matter interactions can be strongly modified by the surrounding environment. Here, we report on the first experimental observation of molecular spontaneous emission inside a highly non-local metamaterial based on a plasmonic nanorod assembly. We show that the emission process is dominated not only by the topology of its local effective medium dispersion, but also by the non-local response of the composite, so that metamaterials with different geometric parameters but the same local effective medium properties exhibit different Purcell factors.
View Article and Find Full Text PDFMetallic films with subwavelength apertures, integrated into a semiconductor by metal-assisted chemical etch (MacEtch), demonstrate enhanced transmission when compared to bare semiconductor surfaces. The resulting "buried" metallic structures are characterized spectroscopically and modeled using rigorous coupled wave analysis. These composite materials offer potential integration with optoelectronic devices, for simultaneous near-uniform electrical contact and strong optical coupling to free space.
View Article and Find Full Text PDFWe present a formalism for understanding the electromagnetism of metasurfaces, optically thin composite films with engineered diffraction. The technique, diffractive interface theory (DIT), takes explicit advantage of the small optical thickness of a metasurface, eliminating the need for solving for light propagation inside the film and providing a direct link between the spatial profile of a metasurface and its diffractive properties. Predictions of DIT are compared with full-wave numerical solutions of Maxwell's equations, demonstrating DIT's validity and computational advantages for optically thin structures.
View Article and Find Full Text PDFWe present an imaging technique that allows the recovery of the profile of wavelength-scale objects with deep subwavelength resolution based on far-field intensity measurements. The approach, interscale mixing microscopy (IMM), relies on diffractive elements positioned in the near-field proximity of an object in order to scatter information carried by evanescent waves into propagating part of the spectrum. A combination of numerical solutions of Maxwell equations and nonlinear fitting is then used to recover the information about the object based on far-field intensity measurements.
View Article and Find Full Text PDFWe present analytical and computational studies of light emission in nonlocal metamaterials formed by arrays of aligned plasmonic nanowires. We demonstrate that the emission lifetime in these composites is a complex function of geometrical and material parameters of the system that cannot be reduced to the "trivial" hyperbolic or elliptical dispersion topology of a homogenised metamaterial. In particular, our studies suggest that the Purcell factor can often be maximized when the composite operates in the elliptic regime, with strong radiation coupling to an additional TM-polarized mode supported by the nonlocal composite, in contrast to the accepted "hyperbolicity related" enhancement.
View Article and Find Full Text PDFNanowire-based plasmonic metamaterials exhibit many intriguing properties related to the hyperbolic dispersion, negative refraction, epsilon-near-zero behavior, strong Purcell effect, and nonlinearities. We have experimentally and numerically studied the electromagnetic modes of individual nanowires (meta-atoms) forming the metamaterial. High-resolution, scattering-type near-field optical microscopy has been used to visualize the intensity and phase of the modes.
View Article and Find Full Text PDFHyperbolic materials enable numerous surprising applications that include far-field subwavelength imaging, nanolithography, and emission engineering. The wavevector of a plane wave in these media follows the surface of a hyperboloid in contrast to an ellipsoid for conventional anisotropic dielectric. The consequences of hyperbolic dispersion were first studied in the 50's pertaining to the problems of electromagnetic wave propagation in the Earth's ionosphere and in the stratified artificial materials of transmission lines.
View Article and Find Full Text PDFThis special issue presents a cross-section of recent progress in the rapidly developing area of optics of hyperbolic metamaterials.
View Article and Find Full Text PDFWe analyze the propagation of electromagnetic modes guided by periodic plasmonic structures. We use full-wave solutions of Maxwell equations to calculate dispersion of these modes and derive analytical description of their optical properties. Finally, we demonstrate that, at a certain frequency range that can be controlled by the geometry, diffraction of these guided states is strongly suppressed, leading to formation of low-diffraction beams.
View Article and Find Full Text PDFPreface to a focus issue of invited articles that review recent progress in studying the fundamental physics of collective phenomena associated with coupling of confined photonic, plasmonic, electronic and phononic states and in exploiting these phenomena to engineer novel devices for light generation, optical sensing, and information processing.
View Article and Find Full Text PDFAll-semiconductor, highly anisotropic metamaterials provide a straightforward path to negative refraction in the mid-infrared. However, their usefulness in applications is restricted by strong frequency dispersion and limited spectral bandwidth. In this work, we show that by stacking multiple metamaterials of varying thickness and doping into one compound metamaterial, bandwidth is increased by 27% over a single-stack metamaterial, and dispersion is reduced.
View Article and Find Full Text PDFWe analyze the optical properties of plasmonic nanorod metamaterials in the epsilon-near-zero regime and show, both theoretically and experimentally, that the performance of these composites is strongly affected by nonlocal response of the effective permittivity tensor. We provide the evidence of interference between main and additional waves propagating in the room-temperature nanorod metamaterials and develop an analytical description of this phenomenon. Additional waves are present in the majority of low-loss epsilon-near-zero structures and should be explicitly considered when designing applications of epsilon-near-zero composites, as they represent a separate communication channel.
View Article and Find Full Text PDFWe present a technique capable of producing subwavelength focal spots in planar nonresonant structures not limited to the near-field of the source. The approach combines the diffraction gratings that generate the high-wave-vector-number modes and planar slabs of homogeneous anisotropic metamaterials that propagate these waves and combine them at the subwavelength focal spots. In a sense, the technique combines the benefits of Fresnel lens, near-field zone plates, hyperlens, and superlens and at the same time resolves their fundamental limitations.
View Article and Find Full Text PDF