Many-excitation removal of a transmon qubit using a single-junction quantum-circuit refrigerator and a two-tone microwave drive.

Achieving fast and precise initialization of qubits is a critical requirement for the successful operation of quantum computers. The combination of engineered environments with all-microwave techniques has recently emerged as a promising approach for the reset of superconducting quantum devices. In this work, we experimentally demonstrate the utilization of a single-junction quantum-circuit refrigerator (QCR) for an expeditious removal of several excitations from a transmon qubit.

The potential of urban trees to reduce heat-related mortality in London.

Increasing temperatures and more frequent heatwave events pose threats to population health, particularly in urban environments due to the urban heat island (UHI) effect. Greening, in particular planting trees, is widely discussed as a means of reducing heat exposure and associated mortality in cities. This study aims to use data from personal weather stations (PWS) across the Greater London Authority to understand how urban temperatures vary according to tree canopy coverage and estimate the heat-health impacts of London's urban trees.

Stem cell mTOR signaling directs region-specific cell fate decisions during intestinal nutrient adaptation.

The adult intestine is a regionalized organ, whose size and cellular composition are adjusted in response to nutrient status. This involves dynamic regulation of intestinal stem cell (ISC) proliferation and differentiation. How nutrient signaling controls cell fate decisions to drive regional changes in cell-type composition remains unclear.

What drives horse success at following human-given cues? An investigation of handler familiarity and living conditions.

Cues such as the human pointing gesture, gaze or proximity to an object are widely used in behavioural studies to evaluate animals' abilities to follow human-given cues. Many domestic mammals, such as horses, can follow human cues; however, factors influencing their responses are still unclear. We assessed the performance of 57 horses at a two-way choice task testing their ability to follow cues of either a familiar (N = 28) or an unfamiliar informant (N = 29).

Workplace Exposure Measurements of Emission from Industrial 3D Printing.

Particle and gaseous contaminants from industrial scale additive manufacturing (AM) machines were studied in three different work environments. Workplaces utilized powder bed fusion, material extrusion, and binder jetting techniques with metal and polymer powders, polymer filaments, and gypsum powder, respectively. The AM processes were studied from operator's point of view to identify exposure events and possible safety risks.

Blueprint for a self-sustained European Centre for service provision in safe and sustainable innovation for nanotechnology.

The coming years are expected to bring rapid changes in the nanotechnology regulatory landscape, with the establishment of a new framework for nano-risk governance, in silico approaches for characterisation and risk assessment of nanomaterials, and novel procedures for the early identification and management of nanomaterial risks. In this context, Safe(r)-by-Design (SbD) emerges as a powerful preventive approach to support the development of safe and sustainable (SSbD) nanotechnology-based products and processes throughout the life cycle. This paper summarises the work undertaken to develop a blueprint for the deployment and operation of a permanent European Centre of collaborating laboratories and research organisations supporting safe innovation in nanotechnologies.

An image analysis method for regionally defined cellular phenotyping of the midgut.

The intestine is divided into functionally distinct regions along the anteroposterior (A/P) axis. How the regional identity influences the function of intestinal stem cells (ISCs) and their offspring remain largely unresolved. We introduce an imaging-based method, "Linear Analysis of Midgut" (LAM), which allows quantitative, regionally defined cellular phenotyping of the whole midgut.

Technical control of nanoparticle emissions from desktop 3D printing.

Material extrusion (ME) desktop 3D printing is known to strongly emit nanoparticles (NP), and the need for risk management has been recognized widely. Four different engineering control measures were studied in real-life office conditions by means of online NP measurements and indoor aerosol modeling. The studied engineering control measures were general ventilation, local exhaust ventilation (LEV), retrofitted enclosure, and retrofitted enclosure with LEV.

Occupational Exposure and Environmental Release: The Case Study of Pouring TiO and Filler Materials for Paint Production.

Pulmonary exposure to micro- and nanoscaled particles has been widely linked to adverse health effects and high concentrations of respirable particles are expected to occur within and around many industrial settings. In this study, a field-measurement campaign was performed at an industrial manufacturer, during the production of paints. Spatial and personal measurements were conducted and results were used to estimate the mass flows in the facility and the airborne particle release to the outdoor environment.

Healthcare provider perspectives on managing sexually transmitted infections in HIV care settings in Kenya: A qualitative thematic analysis.

Background: The burden of sexually transmitted infections (STIs) has been increasing in Kenya, as is the case elsewhere in sub-Saharan Africa, while measures for control and prevention are weak. The objectives of this study were to (1) describe healthcare provider (HCP) knowledge and practices, (2) explore HCP attitudes and beliefs, (3) identify structural and environmental factors affecting STI management, and (4) seek recommendations to improve the STI program in Kenya.

Methods And Findings: Using individual in-depth interviews (IDIs), data were obtained from 87 HCPs working in 21 high-volume comprehensive HIV care centers (CCCs) in 7 of Kenya's 8 regions.

Infant and Adult Inhalation Exposure to Resuspended Biological Particulate Matter.

Human-induced resuspension of floor dust is a dynamic process that can serve as a major indoor source of biological particulate matter (bioPM). Inhalation exposure to the microbial and allergenic content of indoor dust is associated with adverse and protective health effects. This study evaluates infant and adult inhalation exposures and respiratory tract deposited dose rates of resuspended bioPM from carpets.

Workplace Measurements of Ultrafine Particles-A Literature Review.

Workers are exposed to ultrafine particles (UFP) in a number of occupations. In order to summarize the current knowledge regarding occupational exposure to UFP (excluding engineered nanoparticles), we gathered information on UFP concentrations from published research articles. The aim of our study was to create a basis for future epidemiological studies that treat UFP as an exposure factor.

Yield of community-based tuberculosis targeted testing and treatment in foreign-born populations in the United States: A systematic review.

Objective: To synthesize outputs and outcomes of community-based tuberculosis targeted testing and treatment (TTT) programs in foreign-born populations (FBP) in the United States (US).

Methods: We systematically searched five bibliographic databases and other key resources. Two reviewers independently applied eligibility criteria to screen citations and extracted data from included studies.

Do School-Based Programs Prevent HIV and Other Sexually Transmitted Infections in Adolescents? A Systematic Review and Meta-analysis.

We systematically reviewed the literature to assess the effectiveness of school-based programs to prevent HIV and other sexually transmitted infections (STI) among adolescents in the USA. We searched six databases including PubMed for studies published through May 2017. Eligible studies included youth ages 10-19 years and assessed any school-based programs in the USA that reported changes in HIV/STI incidence or testing.

Characterization of particle exposure in ferrochromium and stainless steel production.

This study describes workers' exposure to fine and ultrafine particles in the production chain of ferrochromium and stainless steel during sintering, ferrochromium smelting, stainless steel melting, and hot and cold rolling operations. Workers' personal exposure to inhalable dust was assessed using IOM sampler with a cellulose acetate filter (AAWP, diameter 25 mm; Millipore, Bedford, MA). Filter sampling methods were used to measure particle mass concentrations in fixed locations.

Lessons learned: program messaging in gender-transformative work with men and boys in South Africa.

Background: Adherence to traditional notions of masculinity has been identified as an important driver in the perpetuation of numerous health and social problems, including gender-based violence and HIV. With the largest generalized HIV epidemic in the world and high rates of violence against women, the need for gender-transformative work in South Africa is broadly accepted in activist circles and at the national and community level. Because of the integral role men play in both of these epidemics, initiatives and strategies that engage men in promoting gender equality have emerged over the last decade and the evidence base supporting the effectiveness of masculinities-based interventions is growing.

Exposure to airborne particles and volatile organic compounds from polyurethane molding, spray painting, lacquering, and gluing in a workshop.

Due to the health risk related to occupational air pollution exposure, we assessed concentrations and identified sources of particles and volatile organic compounds (VOCs) in a handcraft workshop producing fishing lures. The work processes in the site included polyurethane molding, spray painting, lacquering, and gluing. We measured total VOC (TVOC) concentrations and particle size distributions at three locations representing the various phases of the manufacturing and assembly process.

Characterization of exposure to carbon nanotubes in an industrial setting.

While production and use of carbon nanotubes (CNTs) is increasing, workers exposure to CNTs is expected to increase as well, with inhalation being potentially the main pathway for uptake. However, there have been few studies reporting results about workers' personal exposure to CNTs. In this study, worker exposure to single-walled CNTs (SWCNTs) during the production of conductive films in a modern up-scaling factory was assessed.

Range-finding risk assessment of inhalation exposure to nanodiamonds in a laboratory environment.

This study considers fundamental methods in occupational risk assessment of exposure to airborne engineered nanomaterials. We discuss characterization of particle emissions, exposure assessment, hazard assessment with in vitro studies, and risk range characterization using calculated inhaled doses and dose-response translated to humans from in vitro studies. Here, the methods were utilized to assess workers' risk range of inhalation exposure to nanodiamonds (NDs) during handling and sieving of ND powder.

The effect of humidity on sensitivity of amine detection in ion mobility spectrometry.

Vaporized water molecules are unavoidably present in every ion mobility spectrometry (IMS) measurement. In general, this humidity is seen in positive mode IMS-spectra as protonated water clusters producing reactant ions. Clusters containing water molecules are also abundant among ions generated by an analyte.

Ion mobility distributions during the initial stages of new particle formation by the ozonolysis of α-pinene.

An ion mobility spectrometer (IMS) was used to study gas phase compounds during nucleation and growth of secondary organic aerosols (SOA). In this study SOA particles were generated by oxidizing α-pinene with O(3) and OH in a 6 m(3) reaction chamber. Positive ion peaks with reduced mobilities of 1.

ImmunoRatio: a publicly available web application for quantitative image analysis of estrogen receptor (ER), progesterone receptor (PR), and Ki-67.

Introduction: Accurate assessment of estrogen receptor (ER), progesterone receptor (PR), and Ki-67 is essential in the histopathologic diagnostics of breast cancer. Commercially available image analysis systems are usually bundled with dedicated analysis hardware and, to our knowledge, no easily installable, free software for immunostained slide scoring has been described. In this study, we describe a free, Internet-based web application for quantitative image analysis of ER, PR, and Ki-67 immunohistochemistry in breast cancer tissue sections.

Adjusting mobility scales of ion mobility spectrometers using 2,6-DtBP as a reference compound.

Performance of several time-of-flight (TOF) type ion mobility spectrometers (IMS) was compared in a joint measurement campaign and their mobility scales were adjusted based on the measurements. A standard reference compound 2,6-di-tert butylpyridine (2,6-DtBP) was used to create a single peak ion mobility distribution with a known mobility value. The effective length of the drift tube of each device, considered here as an instrument constant, was determined based on the measurements.

A public-domain image processing tool for automated quantification of fluorescence in situ hybridisation signals.

Aims: To develop and evaluate an automated method for quantification of HER2 fluorescence in situ hybridisation (FISH) signals.

Methods: Using a popular, open source image manipulation tool, ImageJ, a macro for FISH signal assessment was created. A comparison against traditional manual counting was performed in breast cancer specimens from 42 patients.