Water-assisted synthesis of stable and multicolored CsPbX@SiO core-shell nanoparticles as fluorescent probes for biosensing.

Colloidal lead halide perovskite nanocrystals are highly luminescent materials with great promise as fluorescent probes in biosensing as long as their intrinsic instability in aqueous media is effectively addressed. In this study, we successfully prepared stable and multicolored CsPbX@SiO (X = Cl/Br, Br and I) core-shell nanoparticles through a simple method based on the water-induced transformation of CsPbX into CsPbX, combined with sol-gel procedures. We observed that the concentration of the CsPbX precursor plays a crucial role in the formation of isolated nanospheres with uniform silica coating and in controlling the number of core-free particles.

Monodispersed CsPbBr@SiO Core-Shell Nanoparticles as Luminescent Labels for Biosensing.

Despite the rising advances in the field of metal halide perovskite nanocrystals (NCs), the exploitation of such nanoparticles as luminescent labels for imaging and biosensing is still unclear and in the early stages of investigation. One of the major challenges toward the implementation of metal halide perovskite NCs in biosensing applications is to produce monodispersed nanoparticles with desired surface characteristics and compatible with aqueous environments. Here, we report the synthesis of monodispersed spherical CsPbBr@SiO core-shell nanoparticles by post-synthetic chemical transformation of 3D CsPbBr NCs in the presence of tetraethyl orthosilicate and a critical water/ammonia ratio.

Slow Dynamic Processes in Lead Halide Perovskite Solar Cells. Characteristic Times and Hysteresis.

Characteristic times of perovskite solar cells (PSCs) have been measured by different techniques: transient photovoltage decay, transient photoluminescence, and impedance spectroscopy. A slow dynamic process is detected that shows characteristic times in the seconds to milliseconds scale, with good quantitative agreement between transient photovoltage decay and impedance spectroscopy. Here, we show that this characteristic time is related with a novel slow dynamic process caused by the peculiar structural properties of lead halide perovskites and depending on perovskite crystal size and organic cation nature.

Efficient passivated phthalocyanine-quantum dot solar cells.

The power conversion efficiency of CdSe and CdS quantum dot sensitized solar cells is enhanced by passivation with asymmetrically substituted phthalocyanines. The introduction of the phthalocyanine dye increases the efficiency up to 45% for CdSe and 104% for CdS. The main mechanism causing this improvement is the quantum dot passivation.

Recombination Study of Combined Halides (Cl, Br, I) Perovskite Solar Cells.

We report on the preparation of a series of solution-processed perovskite solar cells based on methylammonium (MA) lead halide derivatives, MAPbX3, which show tunable optical properties depending on the nature and ratio of the halides employed (X = Cl, Br, and I). Devices have been prepared with different cell architecture, thin film, and mesoporous scaffold (TiO2 and Al2O3). We have analyzed different sample sets focusing on the characterization of the charge recombination by means of impedance spectroscopy (IS).

General working principles of CH3NH3PbX3 perovskite solar cells.

Organometal halide perovskite-based solar cells have recently realized large conversion efficiency over 15% showing great promise for a new large scale cost-competitive photovoltaic technology. Using impedance spectroscopy measurements we are able to separate the physical parameters of carrier transport and recombination in working devices of the two principal morphologies and compositions of perovskite solar cells, viz. compact thin films of CH3NH3PbI(3-x)Clx and CH3NH3PbI3 infiltrated on nanostructured TiO2.

Selective contacts drive charge extraction in quantum dot solids via asymmetry in carrier transfer kinetics.

Colloidal quantum dot solar cells achieve spectrally selective optical absorption in a thin layer of solution-processed, size-effect tuned, nanoparticles. The best devices built to date have relied heavily on drift-based transport due to the action of an electric field in a depletion region that extends throughout the thickness of the quantum dot layer. Here we study for the first time the behaviour of the best-performing class of colloidal quantum dot films in the absence of an electric field, by screening using an electrolyte.

Mechanism of carrier accumulation in perovskite thin-absorber solar cells.

Photovoltaic conversion requires two successive steps: accumulation of a photogenerated charge and charge separation. Determination of how and where charge accumulation is attained and how this accumulation can be identified is mandatory for understanding the performance of a photovoltaic device and for its further optimization. Here we analyse the mechanism of carrier accumulation in lead halide perovskite, CH3NH3PbI3, thin-absorber solar cells by means of impedance spectroscopy.

High performance PbS Quantum Dot Sensitized Solar Cells exceeding 4% efficiency: the role of metal precursors in the electron injection and charge separation.

Here we report the preparation of high performance Quantum Dot Sensitized Solar Cells (QDSCs) based on PbS-CdS co-sensitized nanoporous TiO2 electrodes. QDs were directly grown on the TiO2 mesostructure by the Successive Ionic Layer Absorption and Reaction (SILAR) technique. This method is characterized by a fast deposition rate which involves random crystal growth and poor control of the defect states and lattice mismatch in the QDs limiting the quality of the electrodes for photovoltaic applications.

Effect of Organic and Inorganic Passivation in Quantum-Dot-Sensitized Solar Cells.

The effect of semiconductor passivation on quantum-dot-sensitized solar cells (QDSCs) has been systematically characterized for CdS and CdS/ZnS. We have found that passivation strongly depends on the passivation agent, obtaining an enhancement of the solar cell efficiency for compounds containing amine and thiol groups and, in contrast, a decrease in performance for passivating agents with acid groups. Passivation can induce a change in the position of TiO2 conduction band and also in the recombination rate and nature, reflected in a change in the β parameter.

Harnessing Infrared Photons for Photoelectrochemical Hydrogen Generation. A PbS Quantum Dot Based "Quasi-Artificial Leaf".

Hydrogen generation by using quantum dot (QD) based heterostructures has emerged as a promising strategy to develop artificial photosynthesis devices. In the present study, we sensitize mesoporous TiO2 electrodes with in-situ-deposited PbS/CdS QDs, aiming at harvesting light in both the visible and the near-infrared for hydrogen generation. This heterostructure exhibits a remarkable photocurrent of 6 mA·cm(-2), leading to 60 mL·cm(-2)·day(-1) hydrogen generation.

Photoanodes based on nanostructured WO3 for water splitting.

Anodically grown WO(3) photoelectrodes prepared in an N-methylformamide (NMF) electrolyte have been investigated with the aim of exploring the effects induced by anodization time and water concentration in the electrochemical bath on the properties of the resulting photoanodes. An n-type WO(3) semiconductor is one of the most promising photoanodes for hydrogen production from water splitting and the electrochemical anodization of tungsten allows very good photoelectrodes, which are characterized by a low charge-transfer resistance and an increased spectral response in the visible region, to be obtained. These photoanodes were investigated by a combination of steady state and transient photoelectrochemical techniques and a correlation between photocurrent produced, morphology, and charge transport has been evaluated.

A sulfide/polysulfide-based ionic liquid electrolyte for quantum dot-sensitized solar cells.

Further development of quantum dot-sensitized solar cells (QDSCs) will require long-term stability in addition to the continuous increase of photovoltaic (PV) conversion efficiency achieved in the last years. We report a robust S(2-)/S(n)(2-) electrolyte that has been specifically designed for compatibility with CdSe quantum dots in sensitized solar cells. The new pyrrolidinium ionic liquid reaches 1.

Modeling high-efficiency quantum dot sensitized solar cells.

With energy conversion efficiencies in continuous growth, quantum dot sensitized solar cells (QDSCs) are currently under an increasing interest, but there is an absence of a complete model for these devices. Here, we compile the latest developments in this kind of cells in order to attain high efficiency QDSCs, modeling the performance. CdSe QDs have been grown directly on a TiO(2) surface by successive ionic layer adsorption and reaction to ensure high QD loading.

Selective chemical modification of silicon nitride/silicon oxide nanostructures to develop label-free biosensors.

The selective introduction of functional groups on the surface of silicon nitride/silicon oxide nanostructures was studied. Chemical strategies based on organosilane, Si-H and N-H reactivities were assayed. Among these strategies, the use of glutaraldehyde to selectively immobilize biomolecules only on the silicon nitride part of the chip surface was the most effective for the covalent attachment of proteins, maintaining also their bioavailability.

Label-free optical biosensing with slot-waveguides.

We demonstrate label-free molecule detection by using an integrated biosensor based on a Si(3)N(4)/SiO(2) slot-waveguide microring resonator. Bovine serum albumin (BSA) and anti-BSA molecular binding events on the sensor surface are monitored through the measurement of resonant wavelength shifts with varying biomolecule concentrations. The biosensor exhibited sensitivities of 1.

PMMA isocyanate-modified digital discs as a support for oligonucleotide-based assays.

A mild chemical procedure for the derivatization of PMMA as the isocyanate on rigid supports is described. The proposal is based on spin-coating the support with a hydroxy-modified PMMA polymer, followed by treatment with (3-isocyanatopropyl)triethoxysilane, developing an isocyanate-ended PMMA. Oligonucleotide hybridization assays performed on this surface demonstrate that the process is simple and highly effective and agree with the results of other modified materials, including aminated PMMA, gold, and glass.