The Distribution of Coronal Plane Alignment of the Knee Classification in a Sample of Spanish Southeast Osteoarthritic Population: A Retrospective Cross-Sectional Observational Study.

The Coronal Plane Alignment of the Knee (CPAK) classification is a pragmatic distribution of nine phenotypes for coronal knee alignment that can be used on healthy and arthritic knees. Our study aimed to describe the CPAK distributions in a Spanish southeast osteoarthritic population and compare them to other populations' published alignment distributions. Full-leg standing X-rays of the lower limb from 528 cases originating from the so-called Vega Alta del Segura (southeast of the Iberian Peninsula) were retrospectively analysed.

Evaluation of Mis-Selection of End Vertebrae and Its Effect on Measuring Cobb Angle and Curve Length in Adolescent Idiopathic Scoliosis.

The Cobb angle is critical in assessing adolescent idiopathic scoliosis (AIS) patients. This study aimed to evaluate the error in selecting the upper- and lower-end vertebrae on AIS digital X-rays by experienced and novice observers and its correlation with the error in measuring the Cobb angle and determining the length of the scoliotic curves. Using the TraumaMeter v.

Maintaining the Physiological Lateral Flexion Gap in the Kinematically Aligned TKA Does Not Compromise Clinical Outcomes at One-Year Follow-Up.

Instability is a common cause of (total knee arthroplasty) TKA failure, which can be prevented by achieving proper gap balance during surgery. There is no consensus on the ideal gap balance in TKA, and different alignment philosophies result in varying soft-tissue tightness. Traditional TKA aims for symmetric compartment balance, while kinematic alignment (KA) restores anatomy and accepts asymmetric flexion gaps.

Acute Dislocation of the Elbow: An All-Arthroscopic Repair of the Lateral Ligament Complex.

The elbow is one of the most commonly dislocated joints. While conservative management is frequently performed for simple elbow dislocations, the importance of primary surgical treatment is still undetermined. However, promising results have been reached after surgical repair.

The Accuracy and Absolute Reliability of a Knee Surgery Assistance System Based on ArUco-Type Sensors.

Recent advances allow the use of Augmented Reality (AR) for many medical procedures. AR via optical navigators to aid various knee surgery techniques (e.g.

Fixed Flexion Contracture Can Successfully Be Addressed with Exact Preservation of the Femoral Joint Line and Only Minimal Increase of Tibia Resection in the Concept of Kinematically Aligned Total Knee Arthroplasty.

The aims of this study were to evaluate the outcomes of patients undergoing kinematic alignment (KA) robot-assisted (RA) total knee arthroplasty (TKA) with and without preoperative fixed flexion contracture (FFC) and address whether additional resection of the proximal tibia is required to address FFC. A retrospective review from 147 consecutive patients who received an RA-TKA with KA and a minimum one-year follow-up was performed. Preop and postop clinical and surgical data were collected.

Early Identification and Treatment of Trochlear Knee Dysplasia.

A shallow sulcus characterizes trochlear dysplasia (TD) of the femoral trochlea, which can lead to chronic pain or instability of the patellofemoral joint. Breech presentation at birth has been identified as a risk factor for developing this condition, which an ultrasound can identify early. Early treatment could be considered at this stage, given the potential for remodelling in these skeletally immature patients.

Integration of Square Fiducial Markers in Patient-Specific Instrumentation and Their Applicability in Knee Surgery.

Computer technologies play a crucial role in orthopaedic surgery and are essential in personalising different treatments. Recent advances allow the usage of augmented reality (AR) for many orthopaedic procedures, which include different types of knee surgery. AR assigns the interaction between virtual environments and the physical world, allowing both to intermingle (AR superimposes information on real objects in real-time) through an optical device and allows personalising different processes for each patient.

Patient-specific instrumentation makes sense in total knee arthroplasty.

Introduction: Patient-specific instrumentation (PSI) for total knee arthroplasty (TKA) surgery was initially developed to increase accuracy. The potential PSI benefits have expanded in the last decade, and other advantages have been published. However, different authors are critical of PSI and argue that the advantages are not such and do not compensate for the extra cost.

Validity and Absolute Reliability of the Cobb Angle in Idiopathic Scoliosis with TraumaMeter Software.

The Cobb angle value is a critical parameter for evaluating adolescent idiopathic scoliosis (AIS) patients. This study aimed to evaluate a software’s validity and absolute reliability to determine the Cobb angle in AIS digital X-rays, with two different degrees of experienced observers. Four experts and four novice evaluators measured 35 scoliotic curves with the software on three separate occasions, one month apart.

Validity and reliability of a computer-assisted system method to measure axial vertebral rotation.

Background: Axial vertebral rotation and Cobb's angle are essential parameters for analysing adolescent idiopathic scoliosis. This study's scope evaluates the validity and absolute reliability of application software based on a new mathematical equation to determine the axial vertebral rotation in digital X-rays according to Raimondi's method in evaluators with different degrees of experience.

Methods: Twelve independent evaluators with different experience levels measured 33 scoliotic curves in 21 X-rays with the software on three separate occasions, separated one month.

Reliability of the posterior condylar offset.

The posterior condylar offset (PCO) has been proposed as a determinant of a postoperative range of motion after total knee arthroplasty, although there is no consensus. This study aimed to demonstrate the error introduced by forcing the femoral rotation to overlap both condyles for the "true" lateral X-ray projection for the PCO measurement. We hypothesize that the angular discrepancy between the posterior femoral cortical reference plane and the posterior condylar axis plane due to rotation invalidates the acquisition of reliable measurements on X-rays.

Patient-Specific Instrumentation Accuracy Evaluated with 3D Virtual Models.

There have been remarkable advances in knee replacement surgery over the last few decades. One of the concerns continues to be the accuracy in achieving the desired alignment. Patient-specific instrumentation (PSI) was developed to increase component placement accuracy, but the available evidence is not conclusive.

'Absolute' inter-observer classifications agreement for proximal humeral fractures with a single shoulder anteroposterior X-ray.

Purpose: Several studies have been carried out, and there is no classification for proximal humeral fractures (PHF) exempted from variability in interpretation and with questioned reliability. In the present study, we investigated the 'absolute diagnostic reliability' of the most currently used classifications for PHFs on a single anterior-posterior X-ray shoulder image.

Methods: Six orthopaedic surgeons, with varying levels of experience in shoulder pathology, evaluated radiographs from 30 proximal humeral fractures, according to the 'absolute reliability' criteria.

Coronal and axial alignment relationship in Caucasian patients with osteoarthritis of the knee.

Individualized pre-operative assessment of the patterns of the lower extremity anatomy and deformities in patients undergoing total knee arthroplasty seems essential for a successful surgery. In the present study, we investigated the relationship among the coronal alignment and the rotational profile of the lower extremities in the Caucasian population with end-stage knee osteoarthritis. We conducted a prospective study of 385 knees that underwent a pre-operative three-dimensional computed tomography-based model.

Translation and validation of the new knee society knee scoring system into Spanish: Spanish KSS translation.

Purpose: The aim of the study was to translate and validate the English version of the 'Knee Society Knee Scoring System' developed in 2011 (2011 KSS) into Spanish. This new KSS version considers patient satisfaction and expectations before and after knee arthroplasty. Moreover, the questionnaire allows a better characterization of a younger and more diverse population.

Computed Tomography-Based Patient-Specific Instrumentation Loses Accuracy with Significant Varus Preoperative Misalignment.

Patient-specific instrumentation (PSI) has been introduced to simplify and make total knee arthroplasty (TKA) surgery more precise, effective, and efficient. We performed this study to determine whether the postoperative coronal alignment is related to preoperative deformity when computed tomography (CT)-based PSI is used for TKA surgery, and how the PSI approach compares with deformity correction obtained with conventional instrumentation. We analyzed pre- and post-operative full length standing hip-knee-ankle (HKA) X-rays of the lower limb in both groups using a convention > 180 degrees for valgus alignment and < 180 degrees for varus alignment.

Revision of total knee arthroplasty with the use of patient-specific instruments: an alternative surgical technique.

Introduction: Accuracy in the placement of components in revision total knee arthroplasty (R-TKA) surgery is sometimes challenging. The applicability of patient‑specific instruments (PSI) in knee surgery has progressively expanded to types of surgery other than primary arthroplasty. Could this assistive technology be used to facilitate accurate R-TKA surgery? The aim of the current manuscript is to describe this new application of PSI for revision of TKA-to-TKA and to provide a step-by-step technical guideline for use.

Impact of surgical instrumentation on hospital length of stay and cost of total knee arthroplasty.

Background: We aimed to analyze the impact of two different types of surgical instrumentation (conventional manual instrumentation (CI) and patient-specific instrumentation (PSI)) on length of stay (LOS) and objectify differences in cost. We hypothesized that there are no differences in the LOS and cost due to the instrumentation system used.

Research Design And Methods: LOS was registered using inpatient admission data provided by the Institutional Management Control Department.

Comparison of weight-bearing full-length radiographs and computed-tomography-scan-based three-dimensional models in the assessment of knee joint coronal alignment.

Background: The aim of the study was to determine any discrepancies among preoperative full-leg standing radiographs (LLR) and supine non-weight-bearing computed tomography (CT)-scan-based three-dimensional (3D) models in the assessment of the lower limb alignment prior to total knee arthroplasty (TKA) and answer the question of whether the LLR study can be obviated in preoperative planning when TKA is performed with patient-specific instrumentation (PSI).

Methods: LLR and CT-scan-based 3D models of 227 knees (183 patients) were measured. LLR data was then compared to 3D alignment data used to design the PSI for TKA surgery.

Planning on CT-Based 3D Virtual Models Can Accurately Predict the Component Size for Total Knee Arthroplasty.

The ability to predict accurate sizing of the implant components for total knee arthroplasty surgery can have several benefits in the operating room, in terms of simplifying the workflow and reducing the number of required instrument trays. Planning on a three-dimensional (3D) virtual model can be used to predict size. The aim of this study was to quantify the accuracy of the surgeon-validated plan prediction on a computed tomography (CT)-based system.

Patient-specific instrumentation in total knee arthroplasty.

Introduction: Total knee arthroplasty (TKA) is one of the most commonly performed orthopedic procedures. During the past decade, patient-specific instrumentation (PSI) has been commercially introduced in order to simplify and make TKA surgery more effective, precise and efficient than conventional mechanical instrumentation (CI) and computer-assisted surgery (CAS). Nevertheless, there are critical arguments against PSI for routine use.

Silicone ring tourniquet versus pneumatic cuff tourniquet in total knee arthroplasty surgery: A randomised comparative study.

Introduction: The aim of the present study was to compare a silicone ring tourniquet (SRT) and a classic pneumatic cuff tourniquet (PT) in patients undergoing total knee replacement. We have compared the impact on the glycolytic activity caused by the ischaemia applied to the limb during the surgery.

Material And Methods: 140 patients that underwent total knee arthroplasty (TKA) were randomised in two groups.