Molecularly imprinted electrochemical sensor based on APTES-functionalized indium tin oxide electrode for the determination of sulfadiazine.

An electrochemical sensor was developed for the sensitive and selective detection of sulfadiazine (SDZ), based on a molecularly imprinted polymer (MIP) film formed on an indium tin oxide (ITO) electrode through a self-assembly process. The SDZ-imprinted ITO electrode (SDZ-MIP/APTES-ITO) was prepared through in situ polymerization using sulfadiazine, methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA), and 2,2'-azobisisobutyronitrile (AIBN) as the template, functional monomer, cross-linker, and initiator respectively. Before polymerization, the ITO electrode was functionalized with 3-aminopropyltriethoxysilane (APTES) to promote covalent attachment of the polymer to the electrode.

A Sustainable and Regenerative Process for the Treatment of Textile Effluents Using Nonphotocatalytic Water Splitting by Nanoporous Oxygen-Deficient Ferrite.

Water is crucial for life. Being the world's third-largest industry, the textile industry pollutes 93 billion cubic meters of water each year. Only 28% of textile wastewater is treated by lower- to middle-income countries due to the costly treatment methods.

A novel approach to low-cost, rapid and simultaneous colorimetric detection of multiple analytes using 3D printed microfluidic channels.

This research paper presents an inventive technique to swiftly create microfluidic channels on distinct membrane papers, enabling colorimetric drug detection. Using a modified DIY RepRap 3D printer with a syringe pump, microfluidic channels (µPADs) are crafted on a flexible nylon-based substrate. This allows simultaneous detection of four common drugs with a single reagent.

A machine learning-based approach to determine infection status in recipients of BBV152 (Covaxin) whole-virion inactivated SARS-CoV-2 vaccine for serological surveys.

Data science has been an invaluable part of the COVID-19 pandemic response with multiple applications, ranging from tracking viral evolution to understanding the vaccine effectiveness. Asymptomatic breakthrough infections have been a major problem in assessing vaccine effectiveness in populations globally. Serological discrimination of vaccine response from infection has so far been limited to Spike protein vaccines since whole virion vaccines generate antibodies against all the viral proteins.

Ultrasensitive Immunosensor Based on Langmuir-Blodgett Deposited Ordered Graphene Assemblies for Dengue Detection.

In this manuscript partially reduced graphene oxide (RGO) nanosheet-based electrodes have been utilized for quantification of the NS1 protein and subsequently for dengue detection. NS1 is the biomarker found circulating in the body of dengue-infected persons on or after first day of the appearance of disease symptoms. Graphene oxide (GO) has been synthesized using a modified Hummer's method, and its ordered nanostructured films have been electrophoretically deposited on indium tin oxide (ITO)-coated glass substrates using Langmuir-Blodgett (LB) deposition.

Large Area Fabrication of Semiconducting Phosphorene by Langmuir-Blodgett Assembly.

Phosphorene is a recently new member of the family of two dimensional (2D) inorganic materials. Besides its synthesis it is of utmost importance to deposit this material as thin film in a way that represents a general applicability for 2D materials. Although a considerable number of solvent based methodologies have been developed for exfoliating black phosphorus, so far there are no reports on controlled organization of these exfoliated nanosheets on substrates.

A biofunctionalized quantum dot-nickel oxide nanorod based smart platform for lipid detection.

A reagent-free, low-cost and sensitive immunosensor has been fabricated using anti-apolipoprotein B (AAB) conjugated l-cysteine in situ capped cadmium sulfide quantum dots (CysCdS QDs) bound to nickel oxide nanorods (nNiO) for detection of low density lipoprotein (LDL) molecules in human serum samples. The structural and morphological properties of AAB conjugated CysCdS QDs and nNiO have been investigated using electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and UV-visible techniques. In this immunosensor, the synthesized NiO nanorods act as mediators that allow the direct electron transfer due to their channeling effect resulting in a mediator-free biosensor.

A Label-Free Photoluminescence Genosensor Using Nanostructured Magnesium Oxide for Cholera Detection.

Nanomaterial-based photoluminescence (PL) diagnostic devices offer fast and highly sensitive detection of pesticides, DNA, and toxic agents. Here we report a label-free PL genosensor for sensitive detection of Vibrio cholerae that is based on a DNA hybridization strategy utilizing nanostructured magnesium oxide (nMgO; size >30 nm) particles. The morphology and size of the synthesized nMgO were determined by transmission electron microscopic (TEM) studies.

Tyrosinase conjugated reduced graphene oxide based biointerface for bisphenol A sensor.

We have fabricated a nanocomposite of reduced graphene oxide (rGO) sheets and chitosan (Cn) polymer based highly sensitive electrochemical biosensor for detection of bisphenol A (BPA). The two-dimensional structure and chemical functionality of rGO and Cn provide an excellent electrode surface for loading of tyrosinase enzyme molecules. This rGO-Cn nanocomposite is capable of effectively utilizing their superior conductivity, larger effective surface area and superior electrochemical performance due to its synergistic effect between rGO and Cn.

Protein functionalized carbon nanotubes-based smart lab-on-a-chip.

A label-free impedimetric lab on a chip (iLOC) is fabricated using protein (bovine serum albumin) and antiapolipoprotein B functionalized carbon nanotubes-nickel oxide (CNT-NiO) nanocomposite for low-density lipoprotein (LDL) detection. The antiapolipoprotein B (AAB) functionalized CNT-NiO microfluidic electrode is assembled with polydimethylsiloxane rectangular microchannels (cross section: 100 × 100 μm). Cytotoxicity of the synthesized CNTs, NiO nanoparticles, and CNT-NiO nanocomposite has been investigated in the presence of lung epithelial cancer A549 cell line using MTT assay.

Self assembled DC sputtered nanostructured rutile TiO₂ platform for bisphenol A detection.

A novel biosensor platform comprising of the functionalized sputtered rutile nanostructured titanium dioxide (nTiO2) for rapid detection of estrogenic substance (bisphenol A) has been proposed. The direct current (DC) sputtering of titanium (Ti) on glass substrate has been converted to ordered nanostructured TiO2 film via oxidation. The nanostructured TiO2 surface was functionalized with self-assembled monolayer (SAM) of 3-aminopropyltriethoxysilane (APTES) and glutaraldehyde.

A surface functionalized nanoporous titania integrated microfluidic biochip.

We present a novel and efficient nanoporous microfluidic biochip consisting of a functionalized chitosan/anatase titanium dioxide nanoparticles (antTiO2-CH) electrode integrated in a polydimethylsiloxane (PDMS) microchannel assembly. The electrode surface can be enzyme functionalized depending on the application. We studied in detail cholesterol sensing using the cholesterol esterase (ChEt) and cholesterol oxidase (ChOx) functionalized chitosan supported mesoporous antTiO2-CH microfluidic electrode.

Chitosan-modified carbon nanotubes-based platform for low-density lipoprotein detection.

We have fabricated an immunosensor based on carbon nanotubes and chitosan (CNT-CH) composite for detection of low density lipoprotein (LDL) molecules via electrochemical impedance technique. The CNT-CH composite deposited on indium tin oxide (ITO)-coated glass electrode has been used to covalently interact with anti-apolipoprotein B (antibody: AAB) via a co-entrapment method. The biofunctionalization of AAB on carboxylated CNT-CH surface has been confirmed by Fourier transform infrared spectroscopic and electron microscopic studies.

Lipid-lipid interactions in aminated reduced graphene oxide interface for biosensing application.

A label-free biosensor based on antiapolipoprotein B 100 functionalized-aminated reduced graphene oxide interface has been fabricated for detection of low density lipoprotein (LDL or lipid) cholesterol. The aminated reduced graphene oxide (NH2-rGO) based electrode surface is covalently functionalized with antiapolipoprotein B 100 (AAB or lipid) using EDC/NHS coupling chemistry. The lipid-lipid interactions at the NH2-rGO electrode surface have been investigated using electrochemical impedance spectroscopic technique.

Highly sensitive biofunctionalized mesoporous electrospun TiO(2) nanofiber based interface for biosensing.

The surface modified and aligned mesoporous anatase titania nanofiber mats (TiO2-NF) have been fabricated by electrospinning for esterified cholesterol detection by electrochemical technique. The electrospinning and porosity of mesoporous TiO2-NF were controlled by use of polyvinylpyrrolidone (PVP) as a sacrificial carrier polymer in the titanium isopropoxide precursor. The mesoporous TiO2-NF of diameters ranging from 30 to 60 nm were obtained by calcination at 470 °C and partially aligned on a rotating drum collector.

Protein-conjugated quantum dots interface: binding kinetics and label-free lipid detection.

We propose a label-free biosensor platform to investigate the binding kinetics using antigen-antibody interaction via electrochemical and surface plasmon resonance (SPR) techniques. The L-cysteine in situ capped cadmium sulfide (CdS; size < 7 nm) quantum dots (QDs) self-assembled on gold (Au) coated glass electrode have been covalently functionalized with apolipoprotein B-100 antibodies (AAB). This protein conjugated QDs-based electrode (AAB/CysCdS/Au) has been used to detect lipid (low density lipoprotein, LDL) biomolecules.

Highly efficient bienzyme functionalized nanocomposite-based microfluidics biosensor platform for biomedical application.

This report describes the fabrication of a novel microfluidics nanobiochip based on a composite comprising of nickel oxide nanoparticles (nNiO) and multiwalled carbon nanotubes (MWCNTs), as well as the chip's use in a biomedical application. This nanocomposite was integrated with polydimethylsiloxane (PDMS) microchannels, which were constructed using the photolithographic technique. A structural and morphological characterization of the fabricated microfluidics chip, which was functionalized with a bienzyme containing cholesterol oxidase (ChOx) and cholesterol esterase (ChEt), was accomplished using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy.

Microfluidic-integrated biosensors: prospects for point-of-care diagnostics.

There is a growing demand to integrate biosensors with microfluidics to provide miniaturized platforms with many favorable properties, such as reduced sample volume, decreased processing time, low cost analysis and low reagent consumption. These microfluidics-integrated biosensors would also have numerous advantages such as laminar flow, minimal handling of hazardous materials, multiple sample detection in parallel, portability and versatility in design. Microfluidics involves the science and technology of manipulation of fluids at the micro- to nano-liter level.

Magnesium oxide grafted carbon nanotubes based impedimetric genosensor for biomedical application.

Nanostructured magnesium oxide (size<10nm) grafted carboxyl (COOH) functionalized multi-walled carbon nanotubes (nMgO-cMWCNTs) deposited electrophoretically onto indium tin oxide (ITO) coated glass electrode and have been utilized for Vibrio cholerae detection. Aminated 23 bases single stranded DNA (NH2-ssDNA) probe sequence (O1 gene) of V. cholerae has been covalently functionalized onto nMgO-cMWCNTs/ITO electrode surface using EDC-NHS chemistry.

Tin oxide quantum dot based DNA sensor for pathogen detection.

We report the application of nano crystalline tin oxide quantum dots (SnO2-QDs) for electrochemical detection of Vibrio cholerae based on DNA hybridization technique. SnO2-QDs (- 1-5 nm) have been synthesized by laser ablation technique in liquid (LAL) and electrophoretically deposited onto hydrolyzed surface of indium tin oxide (ITO) coated glass electrode. A single stranded oligonucleotide probe (23 bases) have been designed form the virulent gene sequence of V.

Biocompatible nanostructured magnesium oxide-chitosan platform for genosensing application.

A novel organic-inorganic platform comprising of chitosan (CH) modified nanostructured magnesium oxide (nanoMgO) has been electrophoretically deposited on the indium-tin-oxide (ITO) substrate. The single stranded probe DNA (ssDNA) sequence of Vibrio cholerae has been covalently functionalized onto CH-nanoMgO/ITO surface. The cytotoxicity assay of nanoMgO particles, examined using human intestinal cell line (INT 407), reveals no significant cytotoxicity at the given doses in the range of 50-350 μg/mL.

A highly efficient microfluidic nano biochip based on nanostructured nickel oxide.

We present results of the studies relating to fabrication of a microfluidic biosensor chip based on nickel oxide nanorods (NRs-NiO) that is capable of directly measuring the concentration of total cholesterol in human blood through electrochemical detection. Using this chip we demonstrate, with high reliability and in a time efficient manner, the detection of cholesterol present in buffer solutions at clinically relevant concentrations. The microfluidic channel has been fabricated onto a nickel oxide nanorod-based electrode co-immobilized with cholesterol esterase (ChEt) and cholesterol oxidase (ChOx) that serves as the working electrode.

Phase control of nanostructured iron oxide for application to biosensor.

We report results of the studies relating to the phase transformation of bare FeO nanoparticles (NPs) to α-FeO NPs obtained during electrophoretic film deposition onto indium-tin oxide coated glass plates. The in situ oxidation of NPs during electrophoretic deposition can be circumvented using surface passivation of the FeO NPs with an organic shell (carbon) as well as an inorganic shell (silica), while retaining the biocompatibility of the FeO NPs. XRD and XPS studies reveal the transformation of FeO NPs to α-FeO NPs upon electrophoretic deposition, and the retention of the phase of the FeO NPs upon encapsulation with carbon and silica, respectively.

Biological delignification of paddy straw and Parthenium sp. using a novel micromycete Myrothecium roridum LG7 for enhanced saccharification.

A new lignolytic micromycete fungus Myrothecium roridum LG7 was isolated and selected for biological delignification of agro residue-paddy straw and herbaceous weed Parthenium sp. Physical and chemical modifications in the biomass following pretreatment with M. roridum LG7 for 7 days in term of structural modification and lignin removal, changes in lignin skeleton, and alteration of cellulose crystallinity was observed through SEM-EDXA, FTIR and XRD analysis, respectively.