Mode III Tear Resistance of Silk Cocoons.

This paper concerns the tear properties and behavior of () silk cocoons. The tear resistance of cocoon layers is found to increase progressively from the innermost layer to the outermost layer. Importantly, the increase in tear strength correlates with increased porosity, which itself affects fiber mobility.

Thermomechanical Properties of Virgin and Recycled Polypropylene-High-Density Polyethylene Blends.

This paper provides evidence and discusses the variability in the thermomechanical behaviour of virgin and recycled polypropylene/high-density polyethylene blends without the addition of other components, which is sparse in the literature. Understanding the performance variability in recycled polymer blends is of critical importance in order to facilitate the re-entering of recycled materials to the consumer market and, thus, contribute towards a circular economy. This is an area that requires further research due to the inhomogeneity of recycled materials.

Atomic Force Microscopy of Phytosterol Based Edible Oleogels.

This work reviews the use of atomic force microscopy (AFM) as a tool to investigate oleogels of edible triglyceride oils. Specific attention is given to those oleogels based on phytosterols and their esters, a class of material the authors have studied extensively. This work consists of a summary of the role of AFM in imaging edible oleogels, including the processing and preparation steps required to obtain high-quality AFM images of them.

A vertical additive-lathe printing system for the fabrication of tubular constructs using gelatin methacryloyl hydrogel.

Reproducing both the mechanical and biological performance of native blood vessels remains an ongoing challenge in vascular tissue engineering. Additive-lathe printing offers an attractive method of fabricating long tubular constructs as a potential vascular graft for the treatment of cardiovascular diseases. Printing hydrogels onto rotating horizontal mandrels often leads to sagging, resulting in poor and variable mechanical properties.

Exploring how changes to the steroidal core alter oleogelation capability in sterol: γ-oryzanol blends.

Oleogels based on sterols such as β-sitosterol blended with the sterol ester γ-oryzanol are a very interesting class of systems, but there are aspects of their formation and structure that remain elusive. It has previously been shown that a methyl group on the C30 position of the sterol-ester plays an important role in gelation. This work explored the effect that having C30 methyl groups on both the sterol and the sterol-ester had on the gelation process and subsequent gel structure.

Semicrystalline Polymer Micro/Nanostructures Formed by Droplet Evaporation of Aqueous Poly(ethylene oxide) Solutions: Effect of Solution Concentration.

Deposits formed after evaporation of sessile droplets, containing aqueous solutions of poly(ethylene oxide), on hydrophilic glass substrates were studied experimentally and mathematically as a function of the initial solution concentration. The macrostructure and micro/nanostructures of deposits were studied using stereo microscopy and atomic force microscopy. A model, based on thin-film lubrication theory, was developed to evaluate the deposit macrostructure by estimating the droplet final height.

Fabrication of a Wearable Flexible Sweat pH Sensor Based on SERS-Active Au/TPU Electrospun Nanofibers.

Development of wearable sensing platforms is essential for the advancement of continuous health monitoring and point-of-care testing. Eccrine sweat pH is an analyte that can be noninvasively measured and used to diagnose and aid in monitoring a wide range of physiological conditions. Surface-enhanced Raman scattering (SERS) offers a rapid, optical technique for fingerprinting of biomarkers present in sweat.

One Surface Treatment, Multiple Possibilities: Broadening the Use-Potential of Para-Aramid Fibers with Mechanical Adhesion.

Aramid fibers are high-strength and high-modulus technical fibers used in protective clothing, such as bulletproof vests and helmets, as well as in industrial applications, such as tires and brake pads. However, their full potential is not currently utilized due to adhesion problems to matrix materials. In this paper, we study how the introduction of mechanical adhesion between aramid fibers and matrix material the affects adhesion properties of the fiber in both thermoplastic and thermoset matrix.

PDMS-ZnO Piezoelectric Nanocomposites for Pressure Sensors.

The addition of piezoelectric zinc oxide (ZnO) fillers into a flexible polymer matrix has emerged as potential piezocomposite materials that can be used for applications such as energy harvesters and pressure sensors. A simple approach for the fabrication of PDMS-ZnO piezoelectric nanocomposites based on two ZnO fillers: nanoparticles (NP) and nanoflowers (NF) is presented in this paper. The effect of the ZnO fillers' geometry and size on the thermal, mechanical and piezoelectric properties is discussed.

Dispersive and filter loss performance of calcium carbonate nanoparticles in water for drilling fluid applications.

Adding nanoparticles in a drilling fluid can aid in the sealing of the nanopores in the borehole wall rock and the mud cake; in this way, the filtrate loss of the drilling fluid can be reduced and the borehole wall is stabilized. In this work, the spectrophotometric method was used to study the effect of dispersants on calcium carbonate nanoparticles. The best dispersion effect was achieved at cetyltrimethyl ammonium bromide (CTAB) concentration of 4 wt%, dispersing time of 45 min, pH value of 8 and stirring speed of 900 rpm.

A modified 3D printer as a hybrid bioprinting-electrospinning system for use in vascular tissue engineering applications.

There is a high demand for small diameter vascular grafts having mechanical and biological properties similar to that of living tissues. Tissue-engineered vascular grafts using current methods have often failed due to the mismatch of mechanical properties between the implanted graft and living tissues. To address this limitation, a hybrid bioprinting-electrospinning system is developed for vascular tissue engineering applications.

Design and development of a nozzle-free electrospinning device for the high-throughput production of biomaterial nanofibers.

This technical note provides a step-by-step guide for the design and construction of a temperature-controlled nozzle-free electrospinning device. The equipment uses a rotating mandrel partially immersed within a polymer solution to produce fibers in an upward motion by inducing the formation of multiple Taylor cones and subsequently multi-jetting out of an electrified open surface. Free-surface electrospinning can overcome limitations and drawbacks associated with single and multi-nozzle spinneret configurations, such as low yield, limited production capacity, nonuniform electric field distribution, and clogging.

Recent advancements in the bioprinting of vascular grafts.

Recent advancements in the bioinks and three-dimensional (3D) bioprinting methods used to fabricate vascular constructs are summarized herein. Critical biomechanical properties required to fabricate an ideal vascular graft are highlighted, as well as various testing methods have been outlined to evaluate the bio-fabricated grafts as per the Food and Drug Administration (FDA) and International Organization for Standardization (ISO) guidelines. Occlusive artery disease and cardiovascular disease are the major causes of death globally.

In Vitro Drug Release, Permeability, and Structural Test of Ciprofloxacin-Loaded Nanofibers.

Nanofibers of the poorly water-soluble antibiotic ciprofloxacin (CIP) were fabricated in the form of an amorphous solid dispersion by using poly(vinyl pyrrolidone) as a polymer matrix, by the low-cost electrospinning method. The solubility of the nanofibers as well as their in vitro diffusion were remarkably higher than those of the CIP powder or the physical mixture of the two components. The fiber size and morphology were optimized, and it was found that the addition of the CIP to the electrospinning solution decreased the nanofiber diameter, leading to an increased specific surface area.

High-throughput production of silk fibroin-based electrospun fibers as biomaterial for skin tissue engineering applications.

In this work, a nozzle-free electrospinning device was built to obtain high-throughput production of silk fibroin-based biocompatible composite fibers with tunable wettability. Synthetic biomaterials tend to present suboptimal cell growth and proliferation, with many studies linking this phenomenon to the hydrophobicity of such surfaces. In this study, electrospun mats consisting of Poly(caprolactone) blended with variant forms of Poly(glycerol sebacate) (PGS) and regenerated silk fibroin were fabricated.

Low-cost FDM 3D-printed modular electrospray/electrospinning setup for biomedical applications.

Here, we report on the inexpensive fabrication of an electrospray/electrospinning setup by fused deposition modelling (FDM) 3D printing and provide the files and parameters needed to print this versatile device. Both electrospray and electrospinning technologies are widely used for pharmaceutical, healthcare and bioengineering applications. The setup was designed to be modular, thus its parts can be exchanged easily.

Thin Polymer Film Force Spectroscopy: Single Chain Pull-out and Desorption.

Atomic force microscopy (AFM) was utilized to investigate the force associated with chain pull-out and single chain desorption of poly(styrene--butadiene) random copolymer thin films on mica, silicon, and graphite substrates. Chain pull-out events were common and produced a force of 20-25 pN. The polymer desorption force was strongest on the graphite substrate and weakest on the mica, which agreed with the calculated work of adhesion for each system and the substrate hydrophobicity.

On the Effect of Substrate Viscoelasticity on the Evaporation Kinetics and Deposition Patterns of Nanosuspension Drops.

This study investigates the evaporation of sessile pure water and nanosuspension drops on viscoelastic polydimethylsiloxane (PDMS) films. We varied the viscoelasticity of the PDMS films by controlling the curing ratio and categorized them into three types: stiff (10:1, 20:1, 40:1), soft (60:1, 80:1), and very soft (100:1, 120:1, 140:1, 160:1). On stiff surfaces, pure water drops initially evaporate in a constant contact radius (CCR) mode, followed by a constant contact angle mode, and finally in a mixed mode of evaporation.

Probing phospholipid microbubbles by atomic force microscopy to quantify bubble mechanics and nanostructural shell properties.

Microbubbles (MBs), which are used as ultrasonic contrast agents, have distinct acoustic signatures which enable them to significantly enhance visualisation of the vasculature. Research is progressing to develop MBs which act as drug/gene delivery vehicles for site-specific therapeutics. In order to manufacture effective theranostic vehicles, it is imperative to understand the mechanical and nanostructural properties of these agents; this will enrich the understanding of how the structural, biophysical and chemical properties of these bubbles impact their functionality.

Molecular Interactions behind the Self-Assembly and Microstructure of Mixed Sterol Organogels.

In this work, we have employed docking and atomistic molecular dynamics (MD) simulations supported by complementary experiments using atomic force microscopy, rheology, and spectroscopy to investigate the self-assembled structure of β-sitosterol and γ-oryzanol molecules into cylindrical tubules in a nonaqueous solvent. Docking models of several phytosterols, including sitosterol, with oryzanol and other sterol esters demonstrate that for systems to form tubules, the phytosterol sterane group must be stacked in a wedge shape with the ester sterane group and a hydrogen bond must form between the hydroxyl group of the phytosterol and the carbonyl group of the ester. MD of the self-assembled structure were initiated with the molecules in a roughly cylindrical configuration, as suggested from previous experimental studies, and the configurations were found to be stable during 50 ns simulations.

On the optimization of low-cost FDM 3D printers for accurate replication of patient-specific abdominal aortic aneurysm geometry.

Background: There is a potential for direct model manufacturing of abdominal aortic aneurysm (AAA) using 3D printing technique for generating flexible semi-transparent prototypes. A patient-specific AAA model was manufactured using fused deposition modelling (FDM) 3D printing technology. A flexible, semi-transparent thermoplastic polyurethane (TPU), called Cheetah Water (produced by Ninjatek, USA), was used as the flexible, transparent material for model manufacture with a hydrophilic support structure 3D printed with polyvinyl alcohol (PVA).

Morphology of Poly(styrene- co-butadiene) Random Copolymer Thin Films and Nanostructures on a Graphite Surface.

We studied the morphology of poly(styrene- co-butadiene) random copolymers on a graphite surface. Polymer solutions were spin coated onto graphite, at various concentrations and molecular weights. The polymer films and nanostructures were imaged using atomic force microscopy.

Bacteria as living patchy colloids: Phenotypic heterogeneity in surface adhesion.

Understanding and controlling the surface adhesion of pathogenic bacteria is of urgent biomedical importance. However, many aspects of this process remain unclear (for example, microscopic details of the initial adhesion and possible variations between individual cells). Using a new high-throughput method, we identify and follow many single cells within a clonal population of near a glass surface.

Nonisothermal Spreading Dynamics of Self-Rewetting Droplets.

We experimentally studied the spreading dynamics of binary alcohol mixtures (and pure liquids for reference) deposited on a heated substrate in a partially wetting situation under nonisothermal conditions. We show that the spreading mechanism of an evaporating droplet exhibits a power-law growth with early-stage exponents that depend strongly and nonmonotonically on the substrate temperature. Moreover, we investigated the temporal and spatial thermal dynamics in the droplet using infrared thermography, revealing the existence of unique thermal patterns due to thermal and/or solutal instabilities, which lead to surface tension gradients, namely the Marangoni effect.

Poly(styrene-co-butadiene) random copolymer thin films and nanostructures on a mica surface: morphology and contact angles of nanodroplets.

The self-assembly of poly(styrene-co-butadiene) random copolymers on mica surfaces was studied by varying solution concentrations and polymer molecular weights. Toluene solutions of the poly(styrene-co-butadiene) samples were spin coated onto a mica surface and the resulting polymer morphology was investigated by atomic force microscopy. At higher concentrations, thin films formed with varying thicknesses; some dewetting was observed which depended on the molecular weight.