Electricity generation and wastewater treatment of oil refinery in microbial fuel cells using Pseudomonas putida.

Microbial fuel cells (MFCs) represent a novel platform for treating wastewater and at the same time generating electricity. Using Pseudomonas putida (BCRC 1059), a wild-type bacterium, we demonstrated that the refinery wastewater could be treated and also generate electric current in an air-cathode chamber over four-batch cycles for 63 cumulative days. Our study indicated that the oil refinery wastewater containing 2213 mg/L (ppm) chemical oxygen demand (COD) could be used as a substrate for electricity generation in the reactor of the MFC.

A single-chamber microbial fuel cell without an air cathode.

Microbial fuel cells (MFCs) represent a novel technology for wastewater treatment with electricity production. Electricity generation with simultaneous nitrate reduction in a single-chamber MFC without air cathode was studied, using glucose (1 mM) as the carbon source and nitrate (1 mM) as the final electron acceptor employed by Bacillus subtilis under anaerobic conditions. Increasing current as a function of decreased nitrate concentration and an increase in biomass were observed with a maximum current of 0.

Comparative bioelectricity production from various wastewaters in microbial fuel cells using mixed cultures and a pure strain of Shewanella oneidensis.

Current and power density from four wastewaters, agriculture (AWW), domestic (DWW), paper (PWW), and food/dairy (FDWW), were comparatively evaluated in combination with three inocula: wastewater endogenous microbes (MFC1), Shewanella oneidensis MR-1 (MFC2), and wastewater endogenous microbes with MR-1 (MFC3) in single chamber microbial fuel cells (MFC). Using AWW (0.011 mA/cm(2); 0.

Glycerol degradation in single-chamber microbial fuel cells.

Glycerol degradation with electricity production by a pure culture of Bacillus subtilis in a single-chamber air cathode of microbial fuel cell (MFC) has been demonstrated. Steady state polarization curves indicated a maximum power density of 0.06 mW/cm(2) with an optimal external resistance of 390Ω.