Correction: Martel-Rodríguez et al. Long-Term Performance of a Hybrid-Flow Constructed Wetlands System for Urban Wastewater Treatment in Caldera de Tirajana (Santa Lucía, Gran Canaria, Spain). 2022, , 14871.

There was an error in the original publication [...

Metal concentrations in transitional and coastal waters measured by passive (Diffusive Gradients in Thin-films) and spot sampling: MONITOOL Project Dataset.

The MONITOOL project (2017-2023) was carried out to describe the relationships between total dissolved and labile metal concentrations measured in spot water samples and in concurrently deployed Diffusive Gradients in Thin-films (DGTs) passive samplers, respectively. The ultimate aim was to adapt existing marine metal Environmental Quality Standards (EQS ) for DGTs, enabling their use in the context of the European Directives (the Water Framework Directive (WFD) and the Marine Strategy Framework Directive (MSFD)). Time-integrated metal concentrations provided by DGTs, representing several days, are an advantage compared to conventional spot sampling, especially in highly dynamic systems, such as transitional waters.

Long-Term Performance of a Hybrid-Flow Constructed Wetlands System for Urban Wastewater Treatment in Caldera de Tirajana (Santa Lucía, Gran Canaria, Spain).

This paper describes the results that have been obtained in a real case study of a hybrid constructed wetlands system, which has been in continuous operation for over 11 years. The main aim of the study was to understand the long-term operation and efficiency of the system (which is situated in the municipality of Santa Lucía, Gran Canaria, Spain), which comprises two vertical-flow and one horizontal-flow constructed wetlands for the treatment of urban wastewater. The system, which was originally designed to treat a flow rate of 12.

An international intercomparison exercise on passive samplers (DGT) for monitoring metals in marine waters under a regulatory context.

In order to move forward in the acceptance of a novel contaminant monitoring technique (Diffusive Gradients in Thin-films: DGT) for assessment of marine water bodies, sensu the WFD, an Inter-Laboratories Comparison (ILC) exercise (nine Europeans laboratories) was organized in the framework of the Interreg Atlantic Area MONITOOL project, which focused on the use of the DGT technique for the measurement of WFD priority metals (Cd, Ni and Pb). Reproducible results were obtained for each metal by several laboratories, supporting the assertion that DGT analysis can be performed satisfactorily by laboratories experienced in measuring metals at trace levels in marine environments, even if they have limited practice in DGT analysis. According to the Z-score analysis, among the 9 participating laboratories, 3 had 100 % of satisfactory results for Cd, Ni, and Pb, 3 had >80 % satisfactory results and 2 had about 60 % satisfactory results.

Metals concentrations in transitional and coastal waters by ICPMS and voltammetry analysis of spot samples and passive samplers (DGT).

This study investigates the relationships among Ni, Cd and Pb's different chemical forms determined by different methodologies in coastal and transitional waters across a broad geographical scale. Concentrations were measured in spot samples and through passive sampling (DGT). High variability of metal concentrations was found among sampling sites and methodologies due to natural water fluctuations rather than to a given metal or method.

Inputs of Total and Labile Dissolved Metals from Six Facilities Continuously Discharging Treated Wastewaters to the Marine Environment of Gran Canaria Island (Canary Islands, Spain).

The presence of ten metals (Cd, Ni, Pb, Cr, Cu, Zn, Al, Fe, Mn, and Co) was investigated in the final discharge of six facilities, including four wastewater treatment plants, which were continuously discharging treated wastewater to the coastal environment in Gran Canaria Island. A four-day sampling campaign was carried out at each facility in July 2020, in which both the spot samplings technique and the diffusive gradient in thin-film technique (DGT) were carried out to measure total dissolved metals and the in situ labile metal fraction, respectively. After the necessary sample preparation steps, measurements were carried out by ICP-MS for both samplings.

Concurrent sampling of transitional and coastal waters by Diffusive Gradient in Thin-films (DGT) and spot sampling for trace metals analysis.

This protocol was developed based on the knowledge acquired in the framework of the Interreg MONITOOL project (EAPA_565/2016) where extensive sampling campaigns were performed in transitional and coastal waters covering eight European countries. It provides detailed procedures and guidelines for the sampling of these waterbodies by concurrent collection of discrete water samples and the deployment of Diffusive Gradient in Thin-films (DGT) passive samplers for the measurement of trace metal concentrations. In order to facilitate the application of this protocol by end-users, it presents steps to follow in the laboratory prior to sampling campaigns, explains the procedures for field campaigns (including measurement of supporting parameters) and subsequent sample processing in the laboratory in preparation for trace metal analyze by inductively coupled plasma-mass spectrometry (ICP-MS) and voltammetry.

Assessing variability in the ratio of metal concentrations measured by DGT-type passive samplers and spot sampling in European seawaters.

The current study evaluates the effect of seawater physico-chemical characteristics on the relationship between the concentration of metals measured by Diffusive Gradients in Thin films (DGT) passive samplers (i.e., DGT-labile concentration) and the concentrations measured in discrete water samples.