Elucidating the Non-Covalent Interactions that Trigger Interdigitation in Lead-Halide Layered Hybrid Perovskites.

Two-dimensional (2D) hybrid organic-inorganic perovskites constitute a versatile class of materials applied to a variety of optoelectronic devices. These materials are composed of alternating layers of inorganic lead halide octahedra and organic ammonium cations. Most perovskite research studies so far have focused on organic sublattices based on phenethylammonium and alkylammonium cations, which are packed by van der Waals cohesive forces.

Surface Modulation via Conjugated Bithiophene Ammonium Salt for Efficient Inverted Perovskite Solar Cells.

The metal halide perovskite absorbers are prone to surface defects, which severely limit the power conversion efficiencies (PCEs) and the operational stability of the perovskite solar cells (PSCs). Herein, trace amounts of bithiophene propylammonium iodide (bi-TPAI) are applied to modulate the surface properties of the gas-quenched perovskite. It is found that the bi-TPAI surface treatment has negligible impact on the perovskite morphology, but it can induce a defect passivation effect and facilitate the charge carrier extraction, contributing to the gain in the open-circuit voltage () and fill factor.

3D Perovskite Passivation with a Benzotriazole-Based 2D Interlayer for High-Efficiency Solar Cells.

2H-Benzotriazol-2-ylethylammonium bromide and iodide and its difluorinated derivatives are synthesized and employed as interlayers for passivation of formamidinium lead triiodide (FAPbI) solar cells. In combination with PbI and PbBr, these benzotriazole derivatives form two-dimensional (2D) Ruddlesden-Popper perovskites (RPPs) as evidenced by their crystal structures and thin film characteristics. When used to passivate n-i-p FAPbI solar cells, the power conversion efficiency improves from 20% to close to 22% by enhancing the open-circuit voltage.

Finding the optimal exchange-correlation functional to describe the excited state properties of push-pull organic dyes designed for thermally activated delayed fluorescence.

To gauge the suitability of an organic dye for thermally activated delayed fluorescence (TADF), its excited state properties are often calculated using density functional theory. For this purpose, the choice of the exchange-correlation (XC) functional is crucial as it heavily influences the quality of the obtained results. In this work, 19 different XC functionals with various amounts of Hartree-Fock (HF) exchange and/or long-range correction parameters are benchmarked versus resolution-of-the-identity second-order coupled cluster (riCC2) calculations for a set of 10 prototype intramolecular donor-acceptor compounds.

Inducing Charge Separation in Solid-State Two-Dimensional Hybrid Perovskites through the Incorporation of Organic Charge-Transfer Complexes.

Two-dimensional (2D) hybrid perovskites make up an emerging class of materials for optoelectronic applications in which inorganic octahedral layers are separated by nonconductive large organic cations. This leads to a high-dimensional and dielectric confinement and hence a high exciton binding energy, which severely limits their application in devices in which charge carrier separation is required. In this work, we achieve improved charge separation by replacing nonconductive organic cations with organic charge-transfer complexes consisting of a pyrene donor and a tetracyanoquinodimethane acceptor.

Fluorescent PCDTBT Nanoparticles with Tunable Size for Versatile Bioimaging.

Conjugated polymer nanoparticles exhibit very interesting properties for use as bio-imaging agents. In this paper, we report the synthesis of PCDTBT (poly([9-(1'-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophene-diyl)) nanoparticles of varying sizes using the mini-emulsion and emulsion/solvent evaporation approach. The effect of the size of the particles on the optical properties is investigated using UV-Vis absorption and fluorescence emission spectroscopy.

Effect of Branching on the Optical Properties of Poly(-phenylene ethynylene) Conjugated Polymer Nanoparticles for Bioimaging.

Fluorescent conjugated polymers formulated in nanoparticles show attractive properties to be used as bioimaging probes. However, their fluorescence brightness is generally limited by quenching phenomena due to interchain aggregation in the confined nanoparticle space. In this work, branched conjugated polymer networks are investigated as a way to enhance the photoluminescence quantum yield of the resulting conjugated polymer nanoparticles (CPNs).

Towards 2D layered hybrid perovskites with enhanced functionality: introducing charge-transfer complexes via self-assembly.

This study broadens the family of 2D layered perovskites by demonstrating that it is possible to self-assemble organic charge-transfer complexes in their organic layer. Organic charge-transfer complexes, formed by combining charge-donating and charge-accepting molecules, are a diverse class of materials that can possess exceptional optical and electronic properties.

Morphology-dependent pH-responsive release of hydrophilic payloads using biodegradable nanocarriers.

The development of functional nanocarriers with stimuli-responsive properties has advanced tremendously to serve biomedical applications such as drug delivery and regenerative medicine. However, the development of biodegradable nanocarriers that can be loaded with hydrophilic compounds and ensure its controlled release in response to changes in the surrounding environment still remains very challenging. Herein, we achieved such demands the preparation of aqueous core nanocapsules using a base-catalyzed interfacial reaction employing a diisocyanate monomer and functional monomers/polymers containing thiol and hydroxyl functionalities at the droplet interface.

The Impact of Acceptor-Acceptor Homocoupling on the Optoelectronic Properties and Photovoltaic Performance of PDTSQx Low Bandgap Polymers.

Push-pull-type conjugated polymers applied in organic electronics do not always contain a perfect alternation of donor and acceptor building blocks. Misscouplings can occur, which have a noticeable effect on the device performance. In this work, the influence of homocoupling on the optoelectronic properties and photovoltaic performance of PDTSQx polymers is investigated, with a specific focus on the quinoxaline acceptor moieties.

Tuning the optical properties of poly(p-phenylene ethynylene) nanoparticles as bio-imaging probes by side chain functionalization.

Conjugated polymers are versatile bio-imaging probes as their optical properties can be readily fine-tuned. In this manuscript, fluorescent conjugated polymer nanoparticles are fabricated using three different poly(p-phenylene ethynylene) (PPE) derivatives. The polymers have the same backbone but carry different side chains, i.

Physicochemical characterizations of functional hybrid liposomal nanocarriers formed using photo-sensitive lipids.

With recent advances in the field of diagnostics and theranostics, liposomal technology has secured a fortified position as a potential nanocarrier. Specifically, radiation/photo-sensitive liposomes containing photo-polymerizable cross-linking lipids are intriguing as they can impart the vesicles with highly interesting properties such as response to stimulus and improved shell stability. In this work, 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphoethanolamine (DTPE) is used as a photo-polymerizable lipid to form functional hybrid-liposomes as it can form intermolecular cross-linking through the diacetylenic groups.

Profluorescent PPV-Based Micellar System as a Versatile Probe for Bioimaging and Drug Delivery.

Although micelles are commonly used for drug delivery purposes, their long-term fate is often unknown due to photobleaching of the fluorescent labels or the use of toxic materials. Here, we present a metal-free, nontoxic, nonbleaching, fluorescent micelle that can address these shortcomings. A simple, yet versatile, profluorescent micellar system, built from amphiphilic poly(p-phenylenevinylene) (PPV) block copolymers, for use in drug delivery applications is introduced.

PPV-Based Conjugated Polymer Nanoparticles as a Versatile Bioimaging Probe: A Closer Look at the Inherent Optical Properties and Nanoparticle-Cell Interactions.

Conjugated polymers have attracted significant interest in the bioimaging field due to their excellent optical properties and biocompatibility. Tailor-made poly(p-phenylenevinylene) (PPV) conjugated polymer nanoparticles (NPs) are in here described. Two different nanoparticle systems using poly[2-methoxy-5-(3',7'-dimethoxyoctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) and a functional statistical copolymer 2-(5'-methoxycarbonylpentyloxy)-5-methoxy-1,4-phenylenevinylene (CPM-MDMO-PPV), containing ester groups on the alkoxy side chains, were synthesized by combining miniemulsion and solvent evaporation processes.

High-Permittivity Conjugated Polyelectrolyte Interlayers for High-Performance Bulk Heterojunction Organic Solar Cells.

Conjugated polyelectrolyte (CPE) interfacial layers present a powerful way to boost the I-V characteristics of organic photovoltaics. Nevertheless, clear guidelines with respect to the structure of high-performance interlayers are still lacking. In this work, impedance spectroscopy is applied to probe the dielectric permittivity of a series of polythiophene-based CPEs.

PPV Polymerization through the Gilch Route: Diradical Character of Monomers.

Despite various studies on the polymerization of poly(p-phenylene vinylene) (PPV) through different precursor routes, detailed mechanistic knowledge on the individual reaction steps and intermediates is still incomplete. The present study aims to gain more insight into the radical polymerization of PPV through the Gilch route. The initial steps of the polymerization involve the formation of a p-quinodimethane intermediate, which spontaneously self-initiates through a dimerization process leading to the formation of diradical species; chain propagation ensues on both sides of the diradical or chain termination occurs by the formation of side products, such as [2.

Continuous Flow Polymer Synthesis toward Reproducible Large-Scale Production for Efficient Bulk Heterojunction Organic Solar Cells.

Organic photovoltaics (OPV) have attracted great interest as a solar cell technology with appealing mechanical, aesthetical, and economies-of-scale features. To drive OPV toward economic viability, low-cost, large-scale module production has to be realized in combination with increased top-quality material availability and minimal batch-to-batch variation. To this extent, continuous flow chemistry can serve as a powerful tool.

Interfacial thiol-isocyanate reactions for functional nanocarriers: a facile route towards tunable morphologies and hydrophilic payload encapsulation.

Functional nanocarriers were synthesized using an in situ inverse miniemulsion polymerization employing thiol-isocyanate reactions at the droplet interface to encapsulate hydrophilic payloads. The morphology of the nanocarriers is conveniently tunable by varying the reaction conditions and the dispersions are easily transferable to the aqueous phase.

Quinoxaline-Based Cyclo(oligophenylenes).

A series of fully conjugated quinoxaline-based oligophenylene macrocycles is synthesized by Ni(0)-mediated Yamamoto-type diaryl homocoupling of (fluorinated) 2,3-bis(4'-bromophenyl)quinoxaline precursors. Cyclotrimers and cyclotetramers are obtained as the dominant reaction products. The cyclooligomers are fully characterized, including single-crystal X-ray structures, and their optoelectronic properties are analyzed with respect to possible applications in host-guest chemistry and organic electronics.

Direct arylation as a versatile tool towards thiazolo[5,4-d]thiazole-based semiconducting materials.

A series of thiazolo[5,4-d]thiazole-based small molecule organic optoelectronic materials is synthesized via a straightforward microwave-activated Pd-catalyzed C-H arylation protocol. The procedure allows us to obtain extended 2,5-dithienylthiazolo[5,4-d]thiazole chromophores with tailor-made energy levels and absorption patterns, depending on the introduced (het)aryl moieties and the molecular (a)symmetry, by shortened sequences without organometallic intermediates. The synthesized materials can be applied as either electron donor or electron acceptor light-harvesting materials in molecular bulk heterojunction organic solar cells.

Electronic structure of positive and negative polarons in functionalized dithienylthiazolo[5,4-d]thiazoles: a combined EPR and DFT study.

2,5-Dithienylthiazolo[5,4-d]thiazole (DTTzTz) derivatives have high potential for solution-processed organic field-effect transistors and solar cells, both as electron acceptors and donors. Here, the electronic structure of positive and negative radicals (polarons) of two functionalized DTTzTz materials is studied using multi-frequency and multi-resonance electron paramagnetic resonance (EPR) in combination with density functional theory (DFT). It is shown that the negative and positive DTTzTz polarons can be distinguished on the basis of their characteristic EPR parameters.

Quinoxaline derivatives with broadened absorption patterns.

Quinoxaline-based semiconducting materials are currently of high interest in the field of organic photovoltaics. The number of structural variations employed has been, however, quite limited to date. In this paper we report on the synthesis of a series of quinoxaline monomers and triads with improved optical features.

Charge transfer in the weak driving force limit in blends of MDMO-PPV and dithienylthiazolo[5,4-d]thiazoles towards organic photovoltaics with high V(OC).

A series of three 5'-aryl-2,5-dithienylthiazolo[5,4-d]thiazole (DTTzTz) semiconducting molecules with different aryl substituents has been investigated as alternative acceptor materials in combination with the donor polymer poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylene vinylene] (MDMO-PPV) in order to evaluate the photoinduced charge transfer (CT) efficiency in the resulting blends, designed towards possible application in organic photovoltaics. Photoluminescence quenching together with polaron detection by electron paramagnetic resonance and photoinduced absorption (PIA) demonstrate an increasing charge transfer efficiency when the DTTzTz substituents are varied from thien-2-yl to 4-trifluoromethylphenyl and 4-cyanophenyl groups, correlating well with the increasing acceptor strength in this series of molecules. In line with this observation, there is a decrease in the effective optical bandgap relative to pure MDMO-PPV that becomes more pronounced along this series of acceptor compounds, reaching 0.

TOF-SIMS investigation of degradation pathways occurring in a variety of organic photovoltaic devices--the ISOS-3 inter-laboratory collaboration.

The present work is the fourth (and final) contribution to an inter-laboratory collaboration that was planned at the 3rd International Summit on Organic Photovoltaic Stability (ISOS-3). The collaboration involved six laboratories capable of producing seven distinct sets of OPV devices that were degraded under well-defined conditions in accordance with the ISOS-3 protocols. The degradation experiments lasted up to 1830 hours and involved more than 300 cells on more than 100 devices.