Proton-hyperpolarized contrast agents are attractive because they can be imaged on virtually any clinical MRI scanner, which is typically equipped to scan only protons rather than heteronuclei (, anything besides protons, , C, N, Xe, Na, .). Even though the lifetime of the proton spin hyperpolarization is only a few seconds, it is sufficient for inhalation and scanning of proton-hyperpolarized gas media.
View Article and Find Full Text PDFNMR hyperpolarization dramatically improves the detection sensitivity of magnetic resonance through the increase in nuclear spin polarization. Because of the sensitivity increase by several orders of magnitude, additional applications have been unlocked, including imaging of gases in physiologically relevant conditions. Hyperpolarized Xe gas recently received FDA approval as the first inhalable gaseous MRI contrast agent for clinical functional lung imaging of a wide range of pulmonary diseases.
View Article and Find Full Text PDFHyperpolarized Xe gas was FDA-approved as an inhalable contrast agent for magnetic resonance imaging of a wide range of pulmonary diseases in December 2022. Despite the remarkable success in clinical research settings, the widespread clinical translation of HP Xe gas faces two critical challenges: the high cost of the relatively low-throughput hyperpolarization equipment and the lack of Xe imaging capability on clinical MRI scanners, which have narrow-bandwidth electronics designed only for proton (H) imaging. To solve this translational grand challenge of gaseous hyperpolarized MRI contrast agents, here we demonstrate the utility of batch-mode production of proton-hyperpolarized diethyl ether gas via heterogeneous pairwise addition of parahydrogen to ethyl vinyl ether.
View Article and Find Full Text PDFBimetallic nanoparticles expand the possibilities of catalyst design, providing an extra degree of freedom for tailoring the catalyst structure in comparison to purely monometallic systems. The distribution mode of two metal species defines the structure of surface catalytic sites, and current research efforts are focused on the development of methods for their controlled tuning. In light of this, a comprehensive investigation of the factors which influence the changes in the morphology of bimetallic nanoparticles, including the elemental redistribution, are mandatory for each particular bimetallic system.
View Article and Find Full Text PDFImmobilized [Ir(COD)Cl]-Linker/TiO catalysts with linkers containing Py, P(Ph) and N(CH) functional groups were prepared. The catalysts were tested via propene hydrogenation with parahydrogen in a temperature range from 40 °C to 120 °C which was monitored via NMR. The catalytic behavior of [Ir(COD)Cl]-Linker/TiO is explained on the basis of quantitative and qualitative XPS data analysis performed for the catalysts before and after the reaction at 120 °C.
View Article and Find Full Text PDFHyperpolarized magnetic resonance imaging (MRI) contrast agents are revolutionizing the field of biomedical imaging. Hyperpolarized Xe-129 was recently FDA approved as an inhalable MRI contrast agent for functional lung imaging sensing. Despite success in research settings, modern Xe-129 hyperpolarizers are expensive (up to $1M), large, and complex to site and operate.
View Article and Find Full Text PDFIn this work the mechanism of methylenecyclobutane hydrogenation over titania-supported Rh, Pt and Pd catalysts was investigated using parahydrogen-induced polarization (PHIP) technique. It was found that methylenecyclobutane hydrogenation leads to formation of a mixture of reaction products including cyclic (1-methylcyclobutene, methylcyclobutane), linear (1-pentene, cis-2-pentene, trans-2-pentene, pentane) and branched (isoprene, 2-methyl-1-butene, 2-methyl-2-butene, isopentane) compounds. Generally, at lower temperatures (150-350 °C) the major reaction product was methylcyclobutane while higher temperature of 450 °C favors the formation of branched products isoprene, 2-methyl-1-butene and 2-methyl-2-butene.
View Article and Find Full Text PDFMagnetic resonance imaging of [1- C]hyperpolarized carboxylates (most notably, [1- C]pyruvate) allows one to visualize abnormal metabolism in tumors and other pathologies. Herein, we investigate the efficiency of H and C hyperpolarization of acetate and pyruvate esters with ethyl, propyl and allyl alcoholic moieties using heterogeneous hydrogenation of corresponding vinyl, allyl and propargyl precursors in isotopically unlabeled and 1- C-enriched forms with parahydrogen over Rh/TiO catalysts in methanol-d and in D O. The maximum obtained H polarization was 0.
View Article and Find Full Text PDFDemonstration of parahydrogen-induced polarization effects in hydrogenations catalyzed by heterogeneous catalysts instead of metal complexes in a homogeneous solution has opened an entirely new dimension for parahydrogen-based research, demonstrating its applicability not only for the production of catalyst-free hyperpolarized liquids and gases and long-lived non-equilibrium spin states for potential biomedical applications, but also for addressing challenges of modern fundamental and industrial catalysis including advanced mechanistic studies of catalytic reactions and operando NMR and MRI of reactors. This essay summarizes the progress achieved in this field by highlighting the research contributed to it by our colleague and friend Kirill V. Kovtunov whose scientific career ended unexpectedly and tragically at the age of 37.
View Article and Find Full Text PDFThe selectivity of product formation is strongly correlated with the nature of the catalyst active centers. Therefore, the selective synthesis of active sites with certain structure is a big challenge in modern catalysis. Here synthetic procedures are adopted for the formation of 1% Rh/TiO catalysts with different properties.
View Article and Find Full Text PDFAminomethylhydroxymethylfuran derivatives are well known compounds which are used in the pharmaceutical industry. Reductive amination of 5-hydroxymethylfurfural (HMF) derived from available non-edible lignocellulosic biomass is an attractive method for the synthesis of this class of compounds. In the present study, the synthesis of N-substituted 5-(hydroxymethyl)-2-furfuryl amines and 5-(acetoxymethyl)-2-furfuryl amines was performed by two-step process, which includes the condensation of furanic aldehydes (HMF and 5-acetoxymethylfurfural) with primary amines in methanol on the first step and the reduction of obtained imines with hydrogen in a flow reactor over CuAlO catalyst derived from layered double hydroxide on the second step.
View Article and Find Full Text PDFMagnetic resonance imaging (MRI) with the use of hyperpolarized gases as contrast agents provides valuable information on lungs structure and function. While the technology of Xe hyperpolarization for clinical MRI research is well developed, it requires the expensive equipment for production and detection of hyperpolarized Xe. Herein we present the H hyperpolarization of diethyl ether vapor that can be imaged on any clinical MRI scanner.
View Article and Find Full Text PDFThe growing interest in magnetic resonance imaging (MRI) for assessing regional lung function relies on the use of nuclear spin hyperpolarized gas as a contrast agent. The long gas-phase lifetimes of hyperpolarized Xe make this inhalable contrast agent acceptable for clinical research today despite limitations such as high cost, low throughput of production and challenges of Xe imaging on clinical MRI scanners, which are normally equipped with proton detection only. We report on low-cost and high-throughput preparation of proton-hyperpolarized diethyl ether, which can be potentially employed for pulmonary imaging with a nontoxic, simple, and sensitive overall strategy using proton detection commonly available on all clinical MRI scanners.
View Article and Find Full Text PDFWe report a systematic study of relaxation dynamics of hyperpolarized (HP) propane and HP propane-d prepared by heterogeneous pairwise parahydrogen addition to propylene and propylene-d respectively. Long-lived spin states (LLS) created for these molecules at the low magnetic field of 0.0475 T were employed for this study.
View Article and Find Full Text PDFParahydrogen-induced polarization (PHIP) is a powerful technique for studying hydrogenation reactions in gas and liquid phases. Pairwise addition of parahydrogen to the hydrogenation substrate imparts nuclear spin order to reaction products, manifested as enhanced 1H NMR signals from the nascent proton sites. Nanoscale metal catalysts immobilized on supports comprise a promising class of catalysts for producing PHIP effects; however, on such catalysts the percentage of substrates undergoing the pairwise addition route-a necessary condition for observing PHIP-is usually low.
View Article and Find Full Text PDFJ Labelled Comp Radiopharm
November 2019
A robust medium-scale (approximately 3 g) synthetic method for N labeling of pyridine ( N-Py) is reported based on the Zincke reaction. N enrichment in excess of 81% was achieved with approximately 33% yield. N-Py serves as a standard substrate in a wide range of studies employing a hyperpolarization technique for efficient polarization transfer from parahydrogen to heteronuclei; this technique, called SABRE (signal amplification by reversible exchange), employs a simultaneous chemical exchange of parahydrogen and a to-be-hyperpolarized substrate (e.
View Article and Find Full Text PDFSignal Amplification By Reversible Exchange (SABRE) is a new and rapidly developing hyperpolarization technique. The recent discovery of Spin-Lock Induced Crossing SABRE (SLIC-SABRE) showed that high field hyperpolarization transfer techniques developed so far were optimized for singlet spin order that does not coincide with the experimentally produced spin state. Here, we investigated the SLIC-SABRE approach and the most advanced quantitative theoretical SABRE model to date.
View Article and Find Full Text PDFCatalysts with well-defined, single, active centers are of great importance and their utilization allows the gap between homo- and heterogeneous catalysis to be bridged and, importantly, the main selectivity problem of heterogeneous catalysis and the main separation challenge of homogeneous catalysis to be overcome. Moreover, the use of single-site catalysts allows the NMR signal to be significantly enhanced through the pairwise addition of two hydrogen atoms from a parahydrogen molecule to an unsaturated substrate. This review covers the fundamentals of the synthesis of single-site catalysts and shows the new aspects of their applications in both modern catalysis and the field of parahydrogen-based hyperpolarization.
View Article and Find Full Text PDFHyperpolarized gases revolutionize functional pulmonary imaging. Hyperpolarized propane is a promising emerging contrast agent for pulmonary MRI. Unlike hyperpolarized noble gases, proton-hyperpolarized propane gas can be imaged using conventional MRI scanners with proton imaging capability.
View Article and Find Full Text PDFPd-In/Al O single-site catalyst was able to show high selectivity (up to 98 %) in the gas phase semihydrogenation of propyne. Formation of intermetallic Pd-In compound was studied by XPS during reduction of the catalyst. FTIR-CO spectroscopy confirmed single-site nature of the intermetallic Pd-In phase reduced at high temperature.
View Article and Find Full Text PDFJ Phys Chem C Nanomater Interfaces
July 2017
The successful transfer of parahydrogen-induced polarization to N spins using heterogeneous catalysts in aqueous solutions was demonstrated. Hydrogenation of a synthesized unsaturated N-labeled precursor (neurine) with parahydrogen (p-H) over Rh/TiO heterogeneous catalysts yielded a hyperpolarized structural analog of choline. As a result, N polarization enhancements of over two orders of magnitude were achieved for the N-ethyl trimethyl ammonium ion product in deuterated water at elevated temperatures.
View Article and Find Full Text PDF