Suppressing Dielectric Loss in MXene/Polymer Nanocomposites through Interfacial Interactions.

Although numerous polymer-based composites exhibit excellent dielectric permittivity, their dielectric performance in various applications is severely hampered by high dielectric loss induced by interfacial space charging and a leakage current. Herein, we demonstrate that embedding molten salt etched MXene into a poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE))/poly(methyl methacrylate) (PMMA) hybrid matrix induces strong interfacial interactions, forming a close-packed inner polymer layer and leading to significantly suppressed dielectric loss and markedly increased dielectric permittivity over a broad frequency range. The intensive molecular interaction caused by the dense electronegative functional terminations (-O and -Cl) in MXene results in restricted polymer chain movement and dense molecular arrangement, which reduce the transportation of the mobile charge carriers.

Naturally Extracted Hydrophobic Solvent and Self-Assembly in Interfacial Polymerization.

Pharmaceutical, chemical, and food industries are actively implementing membrane nanofiltration modules in their processes to separate valuable products and recover solvents. Interfacial polymerization (IP) is the most widely used method to produce thin-film composite membranes for nanofiltration and reverse osmosis processes. Although membrane processes are considered green and environmentally friendly, membrane fabrication has still to be further developed in such direction.

Dielectric, Thermal and Water Absorption Properties of Some EPDM/Flax Fiber Composites.

This paper deals with the dielectric and sorption properties of some flax fiber-reinforced ethylene-propylene-diene monomer (EPDM) composites containing different fiber loadings as well as their behavior after exposure to different doses of electron beam irradiation. Three relaxation processes were evinced, a weak relaxation β at sub-T temperatures and two α-type relaxations above the T. The EPDM/flax composites exhibited higher values of dielectric constant, dielectric loss and conductivity as compared to a pristine EPDM sample.

New perspectives on development of polysulfones/cellulose derivatives based ionic-exchange membranes: Dielectric response and hemocompatibility study.

Due to the increasing need from the membrane technologies for diverse applications, development of new generation of materials with electroactive properties and significant impact on the future technological systems was imposed. An innovative way of designing the membrane materials with long-term stable hydrophilicity, enhanced workability, porosity, and good biocompatibility, has been adopted by blending of quaternized polysulfone (PSFQ) with a cellulose derivative (cellulose acetate phthalate, CAP). Moreover, the quaternization effect has significantly improved the electrical performances, in terms of the ionic conductivity, electron interactions, and dielectric properties, required by target applications, i.

3D Analysis of Ordered Porous Polymeric Particles using Complementary Electron Microscopy Methods.

Highly porous particles with internal triply periodic minimal surfaces were investigated for sorption of proteins. The visualization of the complex ordered morphology requires complementary advanced methods of electron microscopy for 3D imaging, instead of a simple 2D projection: transmission electron microscopy (TEM) tomography, slice-and-view focused ion beam (FIB) and serial block face (SBF) scanning electron microscopy (SEM). The capability of each method of 3D image reconstruction was demonstrated and their potential of application to other synthetic polymeric systems was discussed.

Functionalized Nanochannels from Self-Assembled and Photomodified Poly(Styrene-b-Butadiene-b-Styrene).

Membranes are prepared by self-assembly and casting of 5 and 13 wt% poly(styrene-b-butadiene-b-styrene) (PS-b-PB-b-PS) copolymers solutions in different solvents, followed by immersion in water or ethanol. By controlling the solution-casting gap, porous films of 50 and 1 µm thickness are obtained. A gradient of increasing pore size is generated as the distance from the surface increased.

Thermal, dynamic mechanical, and dielectric analyses of some polyurethane biocomposites.

Polymer biocomposites based on segmented poly(ester urethane) and extracellular matrix components have been prepared for the development of tissue engineering applications with improved biological characteristics of the materials in contact with blood and tissues for long periods. Thermal, dynamical, and dielectrical analyses were employed to study the molecular dynamics of these materials and the influence of changing the physical network morphology and hydrogen bond interactions accompanied by phase transitions, interfacial effects, and polarization or conductivity. All phenomena that concur in the tested materials are evaluated by cross-examination of the dynamic mechanical characteristic properties (storage modulus, loss modulus, and loss factor) and dielectric properties (relative permittivity, relative loss factor, and loss tangent) as a function of temperature.