In Situ Ring-Opening Polymerization of -lactide on the Surface of Pristine and Aminated Silica: Synthesis and Metal Ions Extraction.

The development of functional materials from food waste sources and minerals is currently of high importance. In the present work, polylactic acid (PLA)/silica composites were prepared by ring-opening polymerizations of -lactide onto the surface of pristine (Silochrom) and amine-functionalized (Silochrom-NH) silica. The characteristics of the ring-opening polymerization onto the surface of modified and unmodified silica were identified and discussed.

Chitosan Deposited onto Fumed Silica Surface as Sustainable Hybrid Biosorbent for Acid Orange 8 Dye Capture: Effect of Temperature in Adsorption Equilibrium and Kinetics.

Chitosan was deposited on fumed silica without the addition of cross-linkers or activating agents. The chitosan surface layer has a high affinity toward organic molecules, e.g.

Peculiarities of Synthesis and Properties of Lignin⁻Silica Nanocomposites Prepared by Sol-Gel Method.

The development of advanced hybrid materials based on polymers from biorenewable sources and mineral nanoparticles is currently of high importance. In this paper, we applied softwood kraft lignins for the synthesis of lignin/SiO₂ nanostructured composites. We described the peculiarities of composites formation in the sol-gel process through the incorporation of the lignin into a silica network during the hydrolysis of tetraethoxysilane (TEOS).

Imidazole-2yl-Phosphonic Acid Derivative Grafted onto Mesoporous Silica Surface as a Novel Highly Effective Sorbent for Uranium(VI) Ion Extraction.

A new imidazol-2yl-phosphonic acid/mesoporous silica sorbent (ImP(O)(OH)/SiO) was developed and applied for uranium(VI) ion removal from aqueous solutions. The synthesized material was characterized by fast kinetics and an extra-high adsorption capacity with respect to uranium. The highest adsorption efficiency of U(VI) ions was obtained for the reaction system at pH 4 and exceeded 618 mg/g.

Chitosan-Silica Hybrid Composites for Removal of Sulfonated Azo Dyes from Aqueous Solutions.

In this study, the influence of the chitosan immobilization method on the properties of final hybrid materials was performed. Chitosan was immobilized on the surface of mesoporous (ChS2) and fumed silica (ChS3) by physical adsorption and the sol-gel method (ChS1). It was found that physical immobilization of chitosan allows to obtain hybrid composites (ChS) with a homogeneous distribution of polymer on the surface, relatively wide pores, and specific surface area of about 170 m/g, pH = 5.

Modified silicas with different structure of grafted methylphenylsiloxane layer.

The method of a chemical assembly of the surface polymeric layer with high contents of the modifying agent was developed. Powders of nanodispersed silica with chemisorbed polymethylphenylsiloxane (PMPS) were synthesized by solvent-free chemical assembly technique with a dimethyl carbonate (DMC) as scission agent. Samples were characterized using FTIR spectroscopy, transmission electron microscopy (TEM), atomic force microscopy (AFM), and elemental analysis (CHN analysis).

Silica with immobilized phosphinic acid-derivative for uranium extraction.

A novel adsorbent benzoimidazol-2-yl-phenylphosphinic acid/aminosilica adsorbent (BImPhP(O)(OH)/SiO2NH2) was prepared by carbonyldiimidazole-mediated coupling of aminosilica with 1-carboxymethylbenzoimidazol-2-yl-phenylphosphinic acid. It was obtained through direct phosphorylation of 1-cyanomethylbenzoimidazole by phenylphosphonic dichloride followed by basic hydrolysis of the nitrile. The obtained sorbent was well characterized by physicochemical methods, such as differential scanning calorimetry-mass spectrometry (DSC-MS), surface area and pore distribution analysis (ASAP), scanning electron microscopy (SEM), X-ray photoelectron (XPS) and Fourier transform infrared (FTIR) spectroscopies.

Immobilization of Polymeric Luminophor on Nanoparticles Surface.

Polymeric luminophors with reduced toxicity are of the priorities in the production of lighting devices, sensors, detectors, bioassays or diagnostic systems. The aim of this study was to develop a method of immobilization of the new luminophor on a surface of nanoparticles and investigation of the structure of the grafted layer. Monomer 2,7-(2-hydroxy-3-methacryloyloxypropoxy)naphthalene (2,7-NAF.

Synthesis and adsorption properties of chitosan-silica nanocomposite prepared by sol-gel method.

A hybrid nanocomposite material has been obtained by in situ formation of an inorganic network in the presence of a preformed organic polymer. Chitosan biopolymer and tetraethoxysilane (TEOS), which is the most common silica precursor, were used for the sol-gel reaction. The obtained composite chitosan-silica material has been characterized by physicochemical methods such as differential thermal analyses (DTA); carbon, hydrogen, and nitrogen (CHN) elemental analysis; nitrogen adsorption/desorption isotherms, scanning electron microscopy (SEM); and Fourier transform infrared (FTIR) spectroscopy to determine possible interactions between silica and chitosan macromolecules.

Galactose oxidase immobilized on silica in an analytical determination of galactose-containing carbohydrates.

Galactose oxidase from Fusarium graminearum IMV-1060 adsorbed on, and covalently bound to, silica carriers has been used for analytical determinations of D-galactose and galactose-containing sugars. Using a flowing oxygen electrode of the Clark-type, sensor system for enzymatic analysis of water solutions of galactose-containing carbohydrates was made. Measurements were taken both in the pulse and continuous modes of a substrate flowing through a column with an immobilized biocatalyst.