Adjuvant Intensity Modulated Radiation Therapy With a Pedicled Flap Reconstruction in Oral Cavity Squamous Cell Carcinomas: Implications on Target Delineation.

Objectives: To address controversies regarding target volume delineation for adjuvant intensity-modulated radiation therapy for oral cavity squamous cell carcinoma with pedicled flap reconstruction and elective nodal irradiation (ENI).

Materials And Methods: During target volume delineation, the primary tumor bed was the pre-surgical gross tumor volume with an additional isotropic margin of 5-10 mm. Additionally, the flap and body tissue junction were given a margin of 5-10 mm (if not already given).

Facile synthesis of BiZnBO-MoSnanocomposite for photodetector and photocatalytic Rhodamine B dye degradation application.

In this research, the visible light active performance of BiZnBO(BBZO) was significantly enhanced through the formation of a composite with few layer MoS. The resultant MoS@BBZO catalyst was employed in both photocatalysis and photodetector applications. Comprehensive structural and morphological analyses of the MoS@BBZO catalyst were conducted using x-ray diffraction, Raman spectroscopy, field-emission scanning electron microscopy (FE-SEM), and transmission electron microscopy.

Degradation of dye through mechano-catalysis using BaBiTiO catalyst.

Ferroelectric BaBiTiO was prepared using solid-state calcination at 950 °C for four hours. X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy were utilized to understand its microstructure and other structural aspects. Particle size was around < 1.

Calligraphic interdigitated capacitive sensors for green electronics.

This study presents a novel approach to fabricating interdigitated capacitive (IDC) touch sensors using graphite-based pencils on a wood substrate. The sensors were designed to detect touches and pressure variations, offering a cost-effective and environmentally friendly solution for sensor fabrication. The fabrication process involved abrasion of graphite pencils on a wooden substrate to create conductive traces, followed by the integration of interdigitated electrode structures.

N0 neck trial: Does intensification of follow-up (Ultrasound + Physical Examination) influence outcomes in early-stage oral cancer?

Aim Of The Study: We previously reported a survival benefit of elective neck dissection (END) over therapeutic neck dissection (TND) in patients with clinically node-negative early-stage oral cancer. We now report the results of the second question in the same study addressing the impact of adding neck ultrasound to physical examination during follow-up on outcomes.

Methods: Patients with lateralized T1/T2 oral squamous cell carcinoma (SCC) were randomized to END or TND and to follow-up with physical-examination plus neck ultrasound (PE+US) versus physical-examination (PE).

MR imaging-based risk stratification scoring system to predict clinical outcomes in carotid body tumors.

Objectives: This study aims to evaluate the role of pretherapy MRI in predicting outcomes in carotid body tumors and propose a grading system for high- and low-risk characteristics.

Materials And Methods: A retrospective observational study of 44 patients with 51 lesions was carried out from year 2005 to 2020. MR images were reviewed for characteristics of carotid body tumor, and a score was given that was correlated with intra- and postoperative findings.

CT-Based Screening for Pulmonary Metastases in Head and Neck Squamous Cell Cancers: Diagnostic Accuracy and Cost Comparison with PET-CECT.

This study's objective was to compare detection rates of radiograph, computed tomography (CT), and positron emission tomography-contrast-enhanced computed tomography (PET-CECT) for pulmonary metastasis/synchronous primary lung tumors in head and neck squamous cell cancer (HNSCC) and its association with clinico-radio-pathological factors. Our retrospective study included 837 HNSCC patients from January 2012 to December 2017. Lung nodules were characterized on CT as benign, indeterminate, and metastatic.

Role of computed tomography in the evaluation of regional metastasis in well-differentiated thyroid cancer.

Background: Accurate neck staging is essential for performing appropriate surgery and avoiding undue morbidity in thyroid cancer. The modality of choice for evaluation is ultrasonography (US), which has limitations, particularly in the central compartment, that can be overcome by adding a computed tomography (CT).

Methods: A total of 314 nodal levels were analyzed in 43 patients with CT, and US; evaluations were done between January 2013 and November 2015.

Electrospun membrane of bismuth vanadate-polyvinylidene fluoride nanofibers for efficient piezo-photocatalysis applications.

The fabrication of a Poly (vinylidene fluoride) membrane (PVDF) and ceramic-assisted bismuth vanadate-polyvinylidene fluoride (BiVO-PVDF) composite membrane was achieved through the utilization of the electrospinning technique. The composition and structure of the fabricated membranes were characterized by X-ray powder diffraction, Raman analysis, scanning electron microscopy, Thermo gravimetric analyzer, Fourier transform infrared spectroscopy, and UV-Vis spectroscopy techniques. The prepared polymeric membranes were then utilized for catalytic investigation and to explore, how structure affects catalytic activity using 5 mg/L, 10 mL methylene blue (MB) dye solution.

Sonocatalytic induced dye degradation and antibacterial performance of SrTiO nanoparticles embedded cotton fabric.

In the present work, a pigment paste was prepared by adding strontium titanate (SrTiO) nanoparticles (NPs) particles to a water and adhesive binder paste. Screen printing was utilized to embed the cotton fabric with the prepared pigment paste. Sonocatalytic induced antibacterial and dye mineralization abilities were evaluated for the printed fabric.

Response assessment of post-treatment head and neck cancers to determine further management using NI-RADS (Neck Imaging Reporting and Data System): a subgroup analysis of a randomized controlled trial.

Objective: Interpreting complex post-treatment changes in head and neck cancer (HNC) is challenging with further added perplexity due to variable interobserver interpretation and hence evolved the NI-RADS lexicon. We evaluated the accuracy of NI-RADS in predicting disease status on 1st post-treatment follow-up CECT in a homogenous cohort of those who received only chemoradiation.

Methods: Retrospective analysis of imaging was done for LASHNC patients who received radical chemoradiation in an open-label, investigator-initiated, phase 3 randomized trial (2012-2018) randomly assigned to either radical radiotherapy with concurrent weekly cisplatin (CRT) or CRT with the same schedule plus weekly nimotuzumab (NCRT).

Ball-milling synthesized BiVO for piezo-photocatalytic assessment.

The mechanochemical ball milling followed by heating at 650 °C for 5 h successfully produced the single-phase BiVO powder. Catalytic activity for methylene blue dye degradation was investigated. Raman spectroscopy and X-ray diffraction were used to confirm the phase formation.

Imaging of Neck Nodes in Head and Neck Cancers - a Comprehensive Update.

Cervical lymph node metastases from head and neck squamous cell cancers significantly reduce disease-free survival and worsen overall prognosis and, hence, deserve more aggressive management and follow-up. As per the eighth edition of the American Joint Committee on Cancer staging manual, extranodal extension, especially in human papillomavirus-negative cancers, has been incorporated in staging as it is important in deciding management and significantly impacts the outcome of head and neck squamous cell cancer. Lymph node imaging with various radiological modalities, including ultrasound, computed tomography and magnetic resonance imaging, has been widely used, not only to demonstrate nodal involvement but also for guided histopathological evaluation and therapeutic intervention.

CaCuTiO nanoparticle-loaded cotton fabric for dual photocatalytic antibacterial and dye degradation applications.

CaCuTiO (CCTO) nanoparticles (NPs) were screen printed on pristine cotton fabric. The CCTO-coated fabric was characterized using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), Raman, X-ray diffraction (XRD), x-ray photoelectron spectrometer (XPS), and field emission-scanning electron microscopy (FE-SEM). The modified fabric photocatalytic antibacterial and dye-degradation abilities were assessed.

Cotton functionalized with polyethylene glycol and graphene oxide for dual thermoregulating and UV-protection applications.

A thermoregulating smart textile based on phase change material (PCM) polyethylene glycol (PEG) was prepared by chemically grafting carboxyl-terminated PEG onto cotton. Further deposits of graphene oxide (GO) nanosheets were made on the PEG grafted cotton (PEG-g-Cotton) to improve the thermal conductivity of the fabric and to block harmful UV radiation. The GO-PEG-g-Cotton was characterized by Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), Raman spectroscopy, X-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and field emission-scanning electron microscopy (FE-SEM).

Mechanochemical Synthesis of BiVO for Improved Photocatalytic Dye Degradation.

A single-phase BiVO powder is formed effectively through a mechanochemical ball milling approach at 650 °C in 5 h and its photocatalytic performance on methylene blue dye is explored. X-ray diffraction and Raman spectroscopy analytical instruments are utilized to confirm the phase formation. The evident presence of irregular-shaped grains is affirmed using a scanning electron microscope.

Enhancing the Performance of Piezoelectric Wind Energy Harvester Using Curve-Shaped Attachments on the Bluff Body.

This paper presents a piezoelectric wind energy harvester that operates by a galloping mechanism with different shaped attachments attached to a bluff body. A comparison is made between harvesters that consist of different shaped attachments on a bluff body; these include triangular, circular, square, Y-shaped, and curve-shaped attachments. Simulation of the pressure field and the velocity field variation around the different shaped bluff bodies is performed and it is found that a high pressure difference creates a high lift force on the bluff body with curve-shaped attachments.

Weekly versus 3-weekly cisplatin along with radiotherapy for locoregionally advanced non-nasopharyngeal head and neck cancers: Is the equipoise in literature addressed yet?

Concurrent chemoradiotherapy with 3-weekly cisplatin 100 mg/m has been the standard of care for locoregionally advanced head and neck cancer (LA-HNC) with level I evidence. While the outcomes in terms of efficacy have been well established, the toxicity profile, compliance, and real-world applicability has been an area of ongoing concern for this regimen, leading the oncologists to explore weekly cisplatin chemoradiotherapy regimen to potentially address the issue. A review of literature was conducted in Pubmed, Scopus, and Medline to compare and evaluate the present role of weekly cisplatin chemotherapy along with radiotherapy versus 3-weekly cisplatin chemotherapy along with radiotherapy in both adjuvant and definitive settings for locoregionally advanced head and neck cancers.

Effect of Poling on Photocatalysis, Piezocatalysis, and Photo-Piezo Catalysis Performance of BaBiTiO Ceramics.

This study focuses on analyzing the poling effect of BaBiTiO (BBT) on the basis of photo and piezo-catalysis performance. BBT powder is prepared via a solid state reaction followed by calcination at 950 °C for 4 h. BBT is characterized by an X-ray diffractometer, scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy.

Comparative Study of the Effective Properties of 0-3 and Gyroid Triply Periodic Minimal Surface Cement-Piezocomposites.

In the present numerical simulation work, effective elastic and piezoelectric properties are calculated and a comparative study is conducted on a cement matrix-based piezocomposite with 0-3 and gyroid triply periodic minimal surface (TPMS) inclusions. The present study compares the effective properties of different piezoelectric materials having two different types of connectivity of the inclusions namely, 0-3 inclusions where the inclusions are physically separated from each other and are embedded within the matrix and the second one is TPMS inclusions having interpenetrating phase type connectivity. Effective properties are calculated for four different materials at five different volume fractions namely, 10%, 15%, 20%, 25%, and 30% volume fractions of inclusion by volume.