A comprehensive study on lithium-based reactive hydride composite (Li-RHC) as a reversible solid-state hydrogen storage system toward potential mobile applications.

Reversible solid-state hydrogen storage is one of the key technologies toward pollutant-free and sustainable energy conversion. The composite system LiBH-MgH can reversibly store hydrogen with a gravimetric capacity of 13 wt%. However, its dehydrogenation/hydrogenation kinetics is extremely sluggish (∼40 h) which hinders its usage for commercial applications.

Structural Study of the Photo-Mediated Growth of Silver Nanoprisms.

We present a small-angle X-ray scattering (SAXS) study of the anisotropic photoinduced growth of silver (Ag) nanoprisms in aqueous dispersions. The growth of nearly spherical (<10 nm) Ag particles into large (>40 nm) and thin (<10 nm) triangular nanoprisms induced by 550 nm laser is followed in terms of particle size using indirect and direct methods for irradiation times up to 150 min. During the process, the surface-to-volume ratio of the particles decreased.

Mutation-induced alterations of intra-filament subunit organization in vimentin filaments revealed by SAXS.

Vimentin intermediate filaments constitute a distinct filament system in mesenchymal cells that is instrumental for cellular mechanics and migration. In vitro, the rod-like monomers assemble in a multi-step, salt-dependent manner into micrometer long biopolymers. To disclose the underlying mechanisms further, we employed small angle X-ray scattering on two recombinant vimentin variants, whose assembly departs at strategic points from the normal assembly route: (i) vimentin with a tyrosine to leucine change at position 117; (ii) vimentin missing the non-α-helical carboxyl-terminal domain.

Yolk@Shell Nanoarchitectures with Bimetallic Nanocores-Synthesis and Electrocatalytic Applications.

In the present paper, we demonstrate a versatile approach for the one-pot synthesis of metal oxide yolk@shell nanostructures filled with bimetallic nanocores. This novel approach is based on the principles of hydrophobic nanoreactor soft-templating and is exemplified for the synthesis of various AgAu@tin-rich ITO (AgAu@ITO) yolk@shell nanomaterials. Hydrophobic nanoreactor soft-templating thereby takes advantage of polystyrene-block-poly(4-vinylpiridine) inverse micelles as two-compartment nanoreactor template, in which the core and the shell of the micelles serve as metal and metal oxide precursor reservoir, respectively.

Structural and kinetic investigation of the hydride composite Ca(BH4)2 + MgH2 system doped with NbF5 for solid-state hydrogen storage.

Designing safe, compact and high capacity hydrogen storage systems is the key step towards introducing a pollutant free hydrogen technology into a broad field of applications. Due to the chemical bonds of hydrogen-metal atoms, metal hydrides provide high energy density in safe hydrogen storage media. Reactive hydride composites (RHCs) are a promising class of high capacity solid state hydrogen storage systems.

Turkevich in New Robes: Key Questions Answered for the Most Common Gold Nanoparticle Synthesis.

This contribution provides a comprehensive mechanistic picture of the gold nanoparticle synthesis by citrate reduction of HAuCl4, known as Turkevich method, by addressing five key questions. The synthesis leads to monodisperse final particles as a result of a seed-mediated growth mechanism. In the initial phase of the synthesis, seed particles are formed onto which the residual gold is distributed during the course of reaction.

Large-scale parallel alignment of platelet-shaped particles through gravitational sedimentation.

Parallel and concentric alignment of microscopic building blocks into several orders of magnitude larger structures is commonly observed in nature. However, if similarly aligned structures are artificially produced their thickness is generally limited to just about one or two orders of magnitude more than the dimensions of the smallest element. We show that sedimentation provides a promising approach to manufacture solid materials consisting of well-aligned platelet-shaped particles while being more than 30,000 times thicker than the individual particle.

Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres.

Hypothesis: Zirconia microparticles produced by sol-gel synthesis have great potential for photonic applications. To this end, identifying synthetic methods that yield reproducible control over size uniformity is important. Phase transformations during thermal cycling can disintegrate the particles.

Coaggregation of Two Anionic Azo Dyestuffs: A Combined Static Light Scattering and Small-Angle X-ray Scattering Study.

The formation of azo dyestuff aggregates in dilute aqueous solution induced by the addition of Mg, Ca, Sr, or Ba ions is followed by time-resolved static light scattering (SLS) and time-resolved small-angle X-ray scattering (SAXS). Time-dependent molar mass data of the growing aggregates is interpreted by means of a kinetic model introduced by Lomakin et al. ( Proc.

Impact of ion valency on the assembly of vimentin studied by quantitative small angle X-ray scattering.

The assembly kinetics of intermediate filament (IF) proteins from tetrameric complexes to single filaments and networks depends on the protein concentration, temperature and the ionic composition of their environment. We systematically investigate how changes in the concentration of monovalent potassium and divalent magnesium ions affect the internal organization of the resulting filaments. Small angle X-ray scattering (SAXS) is very sensitive to changes in the filament cross-section such as diameter or compactness.

Block copolymer hollow fiber membranes with catalytic activity and pH-response.

We fabricated block copolymer hollow fiber membranes with self-assembled, shell-side, uniform pore structures. The fibers in these membranes combined pores able to respond to pH and acting as chemical gates that opened above pH 4, and catalytic activity, achieved by the incorporation of gold nanoparticles. We used a dry/wet spinning process to produce the asymmetric hollow fibers and determined the conditions under which the hollow fibers were optimized to create the desired pore morphology and the necessary mechanical stability.

Structural diversity in iron oxide nanoparticle assemblies as directed by particle morphology and orientation.

The mesostructure of ordered arrays of anisotropic nanoparticles is controlled by a combination of packing constraints and interparticle interactions, two factors that are strongly dependent on the particle morphology. We have investigated how the degree of truncation of iron oxide nanocubes controls the mesostructure and particle orientation in drop cast mesocrystal arrays. The combination of grazing incidence small-angle X-ray scattering and scanning electron microscopy shows that mesocrystals of highly truncated cubic nanoparticles assemble in an fcc-type mesostructure, similar to arrays formed by iron oxide nanospheres, but with a significantly reduced packing density and displaying two different growth orientations.

Formation mechanism of silver nanoparticles stabilized in glassy matrices.

In any given matrix control over the final particle size distribution requires a constitutive understanding of the mechanisms and kinetics of the particle evolution. In this contribution we report on the formation mechanism of silver nanoparticles embedded in a soda-lime silicate glass matrix. For the silver ion-exchanged glass it is shown that at temperatures below 410 °C only molecular clusters (diameter <1 nm) are forming which are most likely silver dimers.

Solution Small-Angle X-ray Scattering as a Screening and Predictive Tool in the Fabrication of Asymmetric Block Copolymer Membranes.

Small-angle X-ray scattering (SAXS) analysis of the diblock copolymer poly(styrene--(4-vinyl)pyridine) in a ternary solvent system of 1,4-dioxane, tetrahydrofuran, and ,-dimethylformamide, and the triblock terpolymer poly(isoprene--styrene--(4-vinyl)pyridine) in a binary solvent system of 1,4-dioxane and tetrahydrofuran, reveals a concentration-dependent onset of ordered structure formation. Asymmetric membranes fabricated from casting solutions with polymer concentrations at or slightly below this ordering concentration possess selective layers with the desired nanostructure. In addition to rapidly screening possible polymer solution concentrations, solution SAXS analysis also predicts hexagonal and square pore lattices of the final membrane surface structure.

Characterization of the PEG layer of sterically stabilized liposomes: a SAXS study.

Synchrotron small-angle X-ray scattering analysis of the bilayer structure of a pharmacologically relevant sterically stabilized liposome system is presented. Describing the electron density profile of the bilayer with the superposition of Gaussian functions, the contribution of the poly(ethylene glycol) (PEG) layers to the total electron density was identified. The changes in the thickness of the PEG layer as well as the distribution of the PEG chains among the outer and inner leaflets of the bilayers were followed by changing the molar ratio of the PEG-lipid and the molar weight of the PEG molecule.

Distribution of counterions around lignosulfonate macromolecules in different polar solvent mixtures.

Lignosulfonate is a colloidal polyelectrolyte that is obtained as a side product in sulfite pulping. In this work we wanted to study the noncovalent association of the colloids in different solvents, as well as to find out how the charged sulfonate groups are organized on the colloid surface. We studied sodium and rubidium lignosulfonate in water-methanol mixtures and in dimethyl formamide.

Atomic structure and structural stability of Sc75Fe25 nanoglasses.

Nanoglasses are solids consisting of nanometer-sized glassy regions connected by interfaces having a reduced density. We studied the structure of Sc(75)Fe(25) nanoglasses by electron microscopy, positron annihilation spectroscopy, and small-/wide-angle X-ray scattering. The positron annihilation spectroscopy measurements showed that the as-prepared nanoglasses consisted of 65 vol% glassy and 35 vol% interfacial regions.

Network structure of polyfluorene sheets as a function of alkyl side chain length.

The formation of self-organized structures in poly(9,9-di-n-alkylfluorene)s ∼1 vol % methylcyclohexane (MCH) and deuterated MCH (MCH-d(14)) solutions was studied at room temperature using neutron and x-ray scattering (with the overall q range of 0.00058-4.29 Å(-1)) and optical spectroscopy.

Switchable pH-responsive polymeric membranes prepared via block copolymer micelle assembly.

A process is described to manufacture monodisperse asymmetric pH-responsive nanochannels with very high densities (pore density >2 × 10(14) pores per m(2)), reproducible in m(2) scale. Cylindric pores with diameters in the sub-10 nm range and lengths in the 400 nm range were formed by self-assembly of metal-block copolymer complexes and nonsolvent-induced phase separation. The film morphology was tailored by taking into account the stability constants for a series of metal-polymer complexes and confirmed by AFM.

Heterogeneities in CuZr-based bulk metallic glasses studied by x-ray scattering.

Inhomogeneities in two CuZr-based bulk metallic glasses (BMGs) were studied by using synchrotron radiation x-ray scattering techniques. (Cu(4.5/5.

SAXS investigation of a cubic to a sponge (L3) phase transition in self-assembled lipid nanocarriers.

The encapsulation and release of peptides, proteins, nucleic acids, and drugs in nanostructured lipid carriers depend on the type of the self-assembled liquid-crystalline organization and the structural dimensions of the aqueous and membraneous compartments, which can be tuned by the multicomponent composition of the systems. In this work, small-angle X-ray scattering (SAXS) investigation is performed on the 'melting' transition of the bicontinuous double diamond cubic phase, formed by pure glycerol monooleate (MO), upon progressive inclusion of varying fractions of pharmaceutical-grade glycerol monooleate (GO) in the hydrated system. The self-assembled MO/GO mixtures are found to form diamond (Pn3m) inverted cubic, inverted hexagonal (H(II)), and sponge (L(3)) phases at ambient temperature in excess of aqueous medium without heat treatment.

Long-living intermediates during a lamellar to a diamond-cubic lipid phase transition: a small-angle X-ray scattering investigation.

To generate nanostructured vehicles with tunable internal organization, the structural phase behavior of a self-assembled amphiphilic mixture involving poly(ethylene glycol) monooleate (MO-PEG) and glycerol monooleate (MO) is studied in excess aqueous medium by time-resolved small-angle X-ray scattering (SAXS) in the temperature range from 1 to 68 degrees C. The SAXS data indicate miscibility of the two components in lamellar and nonlamellar soft-matter nanostructures. The functionalization of the MO assemblies by a MO-PEG amphiphile, which has a flexible large hydrophilic moiety, appears to hinder the epitaxial growth of a double diamond (D) cubic lattice from the lamellar (L) bilayer structure during the thermal phase transition.

On the chemical state and distribution of Zr- and V-based additives in reactive hydride composites.

Reactive hydride composites (RHCs) are very promising hydrogen storage materials for future applications due to their reduced reaction enthalpies and high gravimetric capacities. At present, the materials' functionality is limited by the reaction kinetics. A significant positive influence can be observed with addition of transition-metal-based additives.

Small-angle X-ray scattering and rheological characterization of aqueous lignosulfonate solutions.

Lignosulfonate is a colloidal polyelectrolyte widely used as a dispersant in various industrial applications and produced during chemical pulping of wood chips. Here we present a systematic small-angle X-ray scattering (SAXS) and rheological study of fractionated lignosulfonate (mass weighted molar mass M w 18 000 g/mol) dissolved in water and 0.2 M NaCl.

Interactions of hydrophobin proteins in solution studied by small-angle X-ray scattering.

Hydrophobins are a group of very surface-active, fungal proteins known to self-assemble on various hydrophobic/hydrophilic interfaces. The self-assembled films coat fungal structures and mediate their attachment to surfaces. Hydrophobins are also soluble in water.