Catalytic co-combustion of biomass and brown coal in a fluidized bed: Economic and environmental benefits.

The work is devoted to the study of combustion of brown coal, pine sawdust, and their mixtures in a fluidized bed of catalyst at 600-750°С. It is shown that an increase in the content of sawdust in a mixture with brown coal leads to an increase in the burnout degree of solid fuel from 94.4% to 99.

Promoting effect of Zn in high-loading Zn/Ni-SiO catalysts for selective hydrogen evolution from methylcyclohexane.

The dehydrogenation of methylcyclohexane to toluene was investigated over high-loading monometallic Ni-SiO and bimetallic Zn/Ni-SiO catalysts. The catalysts were prepared by the impregnation coupled with the advantageous heterophase sol-gel technique. Their performance was tested in a fixed-bed flow reactor at 250-350 °C, 0.

CuFeAl Nanocomposite Catalysts for Coal Combustion in Fluidized Bed.

A method of oil-drop granulation was suggested for the preparation of spherical CuFeAl nanocomposite catalysts. The catalysts were characterized by a set of physicochemical methods (X-ray diffraction, temperature-programmed reduction by H, low-temperature nitrogen adsorption, crushing strength) and tested in the oxidation of CO and burning of brown coal in a fluidized bed. It was found that the catalysts have high mechanical strength (16.

The Influence of Cu and Al Additives on Reduction of Iron(III) Oxide: In Situ XRD and XANES Study.

The reduction of Fe-based nanocomposite catalysts doped with Al and Cu has been studied using in situ X-ray diffraction (XRD), in situ X-ray absorption near-edge structure (XANES), and temperature-programmed reduction (TPR) techniques. The catalysts have been synthesized by melting of iron, aluminum, and copper salts. According to XRD, the catalysts consist mainly of FeO and AlO phases.