Magnetic methods in studies of new superconducting hydrides in a diamond anvil cell.

This short perspective article summarizes the growing experimental evidence supporting the original claims about hydrogen-rich "superhydrydes" as members of a new family of nearly room temperature BCS superconductors, with hydrogen sub-lattice pre-compressed to the metallic and superconducting state, exactly as predicted in earlier and more recent theoretical works.

The stability of FeH and hydrogen transport at Earth's core mantle boundary.

Iron hydride in Earth's interior can be formed by the reaction between hydrous minerals (water) and iron. Studying iron hydride improves our understanding of hydrogen transportation in Earth's interior. Our high-pressure experiments found that face-centered cubic (fcc) FeH (x ≤ 1) is stable up to 165 GPa, and our ab initio molecular dynamics simulations predicted that fcc FeH transforms to a superionic state under lower mantle conditions.

Synthesis, Structure, and Electric Conductivity of Higher Hydrides of Ytterbium at High Pressure.

While most of the rare-earth metals readily form trihydrides, due to increased stability of the filled 4f electronic shell for Yb(II), only YbH, formally corresponding to Yb(YbH) (or YbH), remains the highest hydride of ytterbium. Utilizing the diamond anvil cell methodology and synchrotron powder X-ray diffraction, we have attempted to push this limit further hydrogenation of metallic Yb and YbH. Compression of the latter has also been investigated in a neutral pressure-transmitting medium (PTM).

Anomalous High-Temperature Superconductivity in YH.

Pressure-stabilized hydrides are a new rapidly growing class of high-temperature superconductors, which is believed to be described within the conventional phonon-mediated mechanism of coupling. Here, the synthesis of one of the best-known high-T superconductors-yttrium hexahydride -YH is reported, which displays a superconducting transition at ≈224 K at 166 GPa. The extrapolated upper critical magnetic field B (0) of YH is surprisingly high: 116-158 T, which is 2-2.

Imaging stress and magnetism at high pressures using a nanoscale quantum sensor.

Pressure alters the physical, chemical, and electronic properties of matter. The diamond anvil cell enables tabletop experiments to investigate a diverse landscape of high-pressure phenomena. Here, we introduce and use a nanoscale sensing platform that integrates nitrogen-vacancy (NV) color centers directly into the culet of diamond anvils.

Enhancement of thermoelectric performance across the topological phase transition in dense lead selenide.

Alternative technologies are required in order to meet a worldwide demand for clean non-polluting energy sources. Thermoelectric generators, which generate electricity from heat in a compact and reliable manner, are potential devices for waste heat recovery. However, thermoelectric performance, as encapsulated by the figure of merit ZT, has remained at around 1.

Evidence for Superconductivity above 260 K in Lanthanum Superhydride at Megabar Pressures.

Recent predictions and experimental observations of high T_{c} superconductivity in hydrogen-rich materials at very high pressures are driving the search for superconductivity in the vicinity of room temperature. We have developed a novel preparation technique that is optimally suited for megabar pressure syntheses of superhydrides using modulated laser heating while maintaining the integrity of sample-probe contacts for electrical transport measurements to 200 GPa. We detail the synthesis and characterization of lanthanum superhydride samples, including four-probe electrical transport measurements that display significant drops in resistivity on cooling up to 260 K and 180-200 GPa, and resistivity transitions at both lower and higher temperatures in other experiments.

Unusual Pressure-Induced Periodic Lattice Distortion in SnSe_{2}.

We performed high-pressure x-ray diffraction (XRD), Raman, and transport measurements combined with first-principles calculations to investigate the behavior of tin diselenide (SnSe_{2}) under compression. The obtained single-crystal XRD data indicate the formation of a (1/3,1/3,0)-type superlattice above 17 GPa. According to our density functional theory results, the pressure-induced transition to the commensurate periodic lattice distortion (PLD) phase is due to the combined effect of strong Fermi surface nesting and electron-phonon coupling at a momentum wave vector q=(1/3,1/3,0).

Emergent superconductivity in an iron-based honeycomb lattice initiated by pressure-driven spin-crossover.

The discovery of iron-based superconductors (FeSCs), with the highest transition temperature (T) up to 55 K, has attracted worldwide research efforts over the past ten years. So far, all these FeSCs structurally adopt FeSe-type layers with a square iron lattice and superconductivity can be generated by either chemical doping or external pressure. Herein, we report the observation of superconductivity in an iron-based honeycomb lattice via pressure-driven spin-crossover.

High-Pressure Behavior of Silver Fluorides up to 40 GPa.

A combined experimental-theoretical study of silver(I) and silver(II) fluorides under high pressure is reported. For Ag, the CsCl-type structure is stable to at least 39 GPa; the overtone of the IR-active mode is seen in the Raman spectrum. Its AgF sibling is a unique compound in many ways: it is more covalent than other known difluorides, crystallizes in a layered structure, and is enormously reactive.

Metal fluoride nanotubes featuring square-planar building blocks in a high-pressure polymorph of AgF.

At a pressure of ca. 15 GPa, AgF transforms to an unprecedented orthorhombic polymorph featuring an array of tubular subunits which are built of corner sharing [AgF] squares. This seems to be the first type of a metal fluoride nanowire and also the only one showing rigid square planar rather than common hexagonal or octahedral moieties.

Comment on "Observation of the Wigner-Huntington transition to metallic hydrogen".

Dias and Silvera (Research Article, 17 February 2017, p. 715) report on the observation of the Wigner-Huntington transition to metallic hydrogen at 495 gigapascals at 5.5 and 83 kelvin.

Decompression-Driven Superconductivity Enhancement in In Se.

An unexpected superconductivity enhancement is reported in decompressed In Se . The onset of superconductivity in In Se occurs at 41.3 GPa with a critical temperature (T ) of 3.

Synthesis of sodium polyhydrides at high pressures.

The only known compound of sodium and hydrogen is archetypal ionic NaH. Application of high pressure is known to promote states with higher atomic coordination, but extensive searches for polyhydrides with unusual stoichiometry have had only limited success in spite of several theoretical predictions. Here we report the first observation of the formation of polyhydrides of Na (NaH3 and NaH7) above 40 GPa and 2,000 K.

Effects of pressure and distortion on superconductivity in Tl₂Ba₂CaCu₂O(8+δ).

The systematic evolution of the structural, vibrational, and superconducting properties of nearly optimally doped Tl2Ba2CaCu2O(8+δ) with pressure up to 30 GPa is studied by x-ray diffraction, Raman scattering, and magnetic susceptibility measurements. No phase transformation is observed in the studied pressure regime. The obtained lattice parameters and unit-cell volume continuously decrease with pressure by following the expected equation of state.

Origin of colossal magnetoresistance in LaMnO3 manganite.

Phase separation is a crucial ingredient of the physics of manganites; however, the role of mixed phases in the development of the colossal magnetoresistance (CMR) phenomenon still needs to be clarified. We report the realization of CMR in a single-valent LaMnO3 manganite. We found that the insulator-to-metal transition at 32 GPa is well described using the percolation theory.

High-pressure resistivity technique for quasi-hydrostatic compression experiments.

Diamond anvil cell techniques are now well established and powerful methods for measuring materials properties to very high pressure. However, high pressure resistivity measurements are challenging because the electrical contacts attached to the sample have to survive to extreme stress conditions. Until recently, experiments in a diamond anvil cell were mostly limited to non-hydrostatic or quasi-hydrostatic pressure media other than inert gases.

Superconductivity in highly disordered dense carbon disulfide.

High pressure plays an increasingly important role in both understanding superconductivity and the development of new superconducting materials. New superconductors were found in metallic and metal oxide systems at high pressure. However, because of the filled close-shell configuration, the superconductivity in molecular systems has been limited to charge-transferred salts and metal-doped carbon species with relatively low superconducting transition temperatures.

Quantum critical point and spin fluctuations in lower-mantle ferropericlase.

Ferropericlase [(Mg,Fe)O] is one of the most abundant minerals of the earth's lower mantle. The high-spin (HS) to low-spin (LS) transition in the Fe(2+) ions may dramatically alter the physical and chemical properties of (Mg,Fe)O in the deep mantle. To understand the effects of compression on the ground electronic state of iron, electronic and magnetic states of Fe(2+) in (Mg0.

Insulator-metal transition in highly compressed NiO.

The insulator-metal transition was observed experimentally in nickel monoxide (NiO) at very high pressures of ~240 GPa. The sample resistance becomes measurable at about 130 GPa and decreases substantially with the pressure increase to ~240 GPa. A sharp drop in resistance by about 3 orders of magnitude has been observed at ~240 GPa with a concomitant change of the resistance type from semiconducting to metallic.

β-tin→Imma→sh phase transitions of germanium.

New paths were designed for the investigations of the β-tin→Imma→sh phase transitions in nanocrystalline Ge under conditions of hydrostatic stress. A second-order transition between the β-tin and Imma phases was identified at 66 GPa, and a first-order transition between the Imma and sh phases was determined at 90 GPa. Superconductivity was obtained up to 190 GPa using the acquired structural data in first-principles calculations.

Bonding changes in hot fluid hydrogen at megabar pressures.

Raman spectroscopy in laser-heated diamond anvil cells has been employed to probe the bonding state and phase diagram of dense hydrogen up to 140 GPa and 1,500 K. The measurements were made possible as a result of the development of new techniques for containing and probing the hot, dense fluid, which is of fundamental importance in physics, planetary science, and astrophysics. A pronounced discontinuous softening of the molecular vibron was found at elevated temperatures along with a large broadening and decrease in intensity of the roton bands.

Persistence of Jahn-Teller distortion up to the insulator to metal transition in LaMnO3.

High pressure, low temperature Raman measurements performed on LaMnO3 up to 34 GPa provide the first experimental evidence for the persistence of the Jahn-Teller distortion over the entire stability range of the insulating phase. This result resolves the ongoing debate about the nature of the pressure driven insulator to metal transition (IMT), demonstrating that LaMnO3 is not a classical Mott insulator. The formation of domains of distorted and regular octahedra, observed from 3 to 34 GPa, sheds new light on the mechanism behind the IMT suggesting that LaMnO3 becomes metallic when the fraction of undistorted octahedra domains increases beyond a critical threshold.

X-ray diffraction in the pulsed laser heated diamond anvil cell.

We have developed in situ x-ray synchrotron diffraction measurements of samples heated by a pulsed laser in the diamond anvil cell at pressure up to 60 GPa. We used an electronically modulated 2-10 kHz repetition rate, 1064-1075 nm fiber laser with 1-100 μs pulse width synchronized with a gated x-ray detector (Pilatus) and time-resolved radiometric temperature measurements. This enables the time domain measurements as a function of temperature in a microsecond time scale (averaged over many events, typically more than 10,000).