Kinetics of Periodate-Mediated Oxidation of Cellulose.

The oxidation of cellulose to dialdehyde cellulose (DAC) is a process that has received increased interest during recent years. Herein, kinetic modeling of the reaction with sodium periodate as an oxidizing agent was performed to quantify rate-limiting steps and overall kinetics of the cellulose oxidation reaction. Considering a pseudo-first-order reaction, a general rate expression was derived to elucidate the impact of pH, periodate concentration, and temperature on the oxidation of cellulose and concurrent formation of cellulose degradation products.

Engineering an All-Biobased Solvent- and Styrene-Free Curable Resin.

The sustainable production of polymers and materials derived from renewable feedstocks such as biomass is vital to addressing the current climate and environmental challenges. In particular, finding a replacement for current widely used curable resins containing undesired components with both health and environmental issues, such as bisphenol-A and styrene, is of great interest and vital for a sustainable society. In this work, we disclose the preparation and fabrication of an all-biobased curable resin.

modified nanocellulose/alginate hydrogel composite beads for purifying mining effluents.

Biobased adsorbents and membranes offer advantages related to resource efficiency, safety, and fast kinetics but have challenges related to their reusability and water flux. Nanocellulose/alginate composite hydrogel beads were successfully prepared with a diameter of about 3-4 mm and porosity as high as 99%. The beads were further modified with TEMPO-mediated oxidation to functionalize the hydroxyl groups of cellulose and facilitate the removal of cationic pollutants from aqueous samples at low pressure, driven by electrostatic interactions.

Unlocking the Power of Multicatalytic Synergistic Transformation: toward Environmentally Adaptable Organohydrogel.

A sustainable and efficient multicatalytic chemical transformation approach is devised for the development of all-biobased environmentally adaptable polymers and gels with multifunctional properties. The catalytic system, utilizing Lignin aluminum nanoparticles (AlNPs)-aluminum ions (Al ), synergistically combines multiple catalytic cycles to create robust, mechanically stable, and versatile organohydrogels. Single catalytic cycles alone fail to achieve desired results, highlighting the importance of cooperatively combining different cycles for successful outcomes.

Copper-mediated synthesis of temperature-responsive poly(-acryloyl glycinamide) polymers: a step towards greener and simple polymerisation.

Stimuli-responsive materials with reversible supramolecular networks controlled by a change in temperature are of interest in medicine, biomedicine and analytical chemistry. For these materials to become more impactful, the development of greener synthetic practices with more sustainable solvents, lower energy consumption and a reduction in metallic catalysts is needed. In this work, we investigate the polymerisation of -acryloyl glycinamide monomer by single-electron transfer reversible-deactivation radical polymerisation and its effect on the cloud point of the resulting PNAGA polymers.

Ocean acidification reduces thallus strength in a non-calcifying foundation seaweed.

Climate change is causing unprecedented changes in terrestrial and aquatic ecosystems through the emission of greenhouse gases, including carbon dioxide (CO). Approximately 30% of CO is taken up by the ocean ('ocean acidification', OA), which has profound effects on foundation seaweed species. Negative physical effects on calcifying algae are clear, but studies on habitat-forming fleshy seaweeds have mainly focused on growth and less on thallus strength.

Combined Catalysis: A Powerful Strategy for Engineering Multifunctional Sustainable Lignin-Based Materials.

The production and engineering of sustainable materials through green chemistry will have a major role in our mission of transitioning to a more sustainable society. Here, combined catalysis, which is the integration of two or more catalytic cycles or activation modes, provides innovative chemical reactions and material properties efficiently, whereas the single catalytic cycle or activation mode alone fails in promoting a successful reaction. Polyphenolic lignin with its distinctive structural functions acts as an important template to create materials with versatile properties, such as being tough, antimicrobial, self-healing, adhesive, and environmentally adaptable.

Spheronized drug microcarrier system from canola straw lignin.

Inhomogeneous lignin from a canola (rapeseed) straw was isolated and valorized as regularly shaped spherical microparticles for drug delivery formulations. Lignin with a purity of 83% and broad molecular weight distribution (Ð > 5.0) was extracted by alkali pulping and acetylated to increase spheronization ability.

Mild blanching prior to pH-shift processing of Saccharina latissima retains protein extraction yields and amino acid levels of extracts while minimizing iodine content.

The seaweed Saccharina latissima is often blanched to lower iodine levels, however, it is not known how blanching affects protein extraction. We assessed the effect of blanching or soaking (80/45/12 °C, 2 min) on protein yield and protein extract characteristics after pH-shift processing of S. latissima.

Optotracing for live selective fluorescence-based detection of biofilms.

is the most common fungal pathogen in humans, implicated in hospital-acquired infections, secondary infections in human immunodeficiency virus (HIV) patients, and is a significant contributor to the global antimicrobial resistance (AMR) burden. Early detection of this pathogen is needed to guide preventative strategies and the selection and development of therapeutic treatments. Fungal biofilms are a unique heterogeneous mix of cell types, extracellular carbohydrates and amyloid aggregates.

All-cellulose functional membranes for water treatment: Adsorption of metal ions and catalytic decolorization of dyes.

In this study, we present a facile, one-step method for the manufacturing of all-cellulose, layered membranes containing cellulose nanocrystals (CNC), TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibers (TO-CNF), or zwitterionic polymer grafted cellulose nanocrystals (CNC-g-PCysMA) as functional entities in combination with cellulose fibers and commercial grade microfibrillated cellulose. The presence of active sites such as hydroxyl, carbonyl, thioethers, and amines, gave the membranes high adsorption capacities for the metal ions Au (III), Co (II), and Fe (III), as well as the cationic organic dye methylene blue (MB). Furthermore, the membranes served as excellent metal-free catalysts for the decolorization of dyes via hydrogenation.

Hybrid Filaments from Biomass: Engineering of Alginate Properties with Maleic Anhydride Grafted Linseed Oil.

Linseed oil was graft modified with maleic anhydride and introduced into alginate by co-extrusion, producing alginate hybrid filaments. A straightforward grafting of maleic anhydride onto the oil backbone produced the modified oil. Additional esterification with -dodecanol was also investigated.

3D printing of a bio-based ink made of cross-linked cellulose nanofibrils with various metal cations.

In this work, we present an approach to cross-link cellulose nanofibrils (CNFs) with various metallic cations (Fe, Al, Ca, and Mg) to produce inks suitable for three-dimensional (3D) printing application. The printability of each hydrogel ink was evaluated, and several parameters such as the optimal ratio of M:TOCNF:HO were discussed. CNF suspensions were produced by mechanical disintegration of cellulose pulp with a microfluidizer and then oxidized with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO).

Ulvan dialdehyde-gelatin hydrogels for removal of heavy metals and methylene blue from aqueous solution.

Hydrogels based on the polysaccharide ulvan from the green macroalgae Ulva fenestrata were synthesized and evaluated as an adsorbent for heavy metals ions and methylene blue. Ulvan was extracted from Ulva fenestrata using diluted hydrochloric acid and recovered by precipitation with EtOH. The extracted ulvan was converted into ulvan dialdehyde via periodate-oxidation and subsequently combined with gelatin yielding hydrogels.

Surface-Initiated Controlled Radical Polymerization Approach to In Situ Cross-Link Cellulose Nanofibrils with Inorganic Nanoparticles.

This paper investigates a strategy to convert hydrophilic cellulose nanofibrils (CNF) into a hydrophobic highly cross-linked network made of cellulose nanofibrils and inorganic nanoparticles. First, the cellulose nanofibrils were chemically modified through an esterification reaction to produce a nanocellulose-based macroinitiator. Barium titanate (BaTiO, BTO) nanoparticles were surface-modified by introducing a specific monomer on their outer-shell surface.

Composition and structure of cell wall ulvans recovered from Ulva spp. along the Swedish west coast.

The cell wall polysaccharide ulvan was isolated from two species of the seaweed Ulva collected along the Swedish west coast. Acidic extraction was benchmarked against hot water extraction with enzymatic purification and against commercial ulvan. Extracted ulvan contained 11-18 % g/g of ash, some protein (up to 1.

Contamination of heavy metals and metalloids in biomass and waste fuels: Comparative characterisation and trend estimation.

The use of contaminated biomass and waste fuels is essential for waste management, waste to energy (WtE) and mitigating carbon emissions. The contamination of heavy metals and metalloids is specially concerned by environmental regulation and waste to energy processes. In this study, comparative characterisation is performed for three typical contaminated biomass and waste fuels.

Zwitterionic Acetylated Cellulose Nanofibrils.

A strategy is devised to synthesize zwitterionic acetylated cellulose nanofibrils (CNF). The strategy included acetylation, periodate oxidation, Schiff base reaction, borohydride reduction, and a quaternary ammonium reaction. Acetylation was performed in glacial acetic acid with a short reaction time of 90 min, yielding, on average, mono-acetylated CNF with hydroxyl groups available for further modification.

Admicellar Polymerization Coating of CNF Enhances Integration in Degradable Nanocomposites.

A water-based one-pot synthesis strategy for converting cellulose nanofibrils (CNF) into a hydrophobic and processable biopolymer grade is devised. CNF was chemically modified through admicellar polymerization, producing fibrils coated with fatty acrylate polymers. The proposed modification targets a change in the interfibrillar interactions and improved CNF compatibility with a degradable plastic composite matrix, poly(butylene adipate- co-terephthalate), PBAT in composites prepared by melt extrusion.

High-Performance Filaments from Fractionated Alginate by Polyvalent Cross-Linking: A Theoretical and Practical Approach.

A series of alginate fractions with significant differences in molecular weight and uronic acid compositions were produced by consecutive fractionation and converted to thin and strong cross-linked polymer filaments via extrusion into calcium, aluminum, or polyaluminum (PolyAl) polyvalent solutions followed by drawing and drying. Models were elaborated to relate the alginate uronic acid composition to the tensile performance in both the wet gel filament and the dry filament states. The wet gel model was compared to the theory of the unidirectional elongation of charged polyelectrolyte gels based on the classical rubber elasticity of dilated polymer networks, extended to include the contributions of non-Gaussian chain extensions and the effect of electrostatic interactions.

Multi-level toxicity assessment of engineered cellulose nanofibrils in Daphnia magna.

Cellulose nanofibril (CNF)-based materials are increasingly used in industrial and commercial applications. However, the impacts of CNF on aquatic life are poorly understood, and there are concerns regarding their potential toxicity. Using a combination of standard ecotoxicological tests and feeding experiments, we assessed the effects of CNF exposure (0.

Stereochemical identification of glucans by oligothiophenes enables cellulose anatomical mapping in plant tissues.

Efficient use of plant-derived materials requires enabling technologies for non-disruptive composition analysis. The ability to identify and spatially locate polysaccharides in native plant tissues is difficult but essential. Here, we develop an optical method for cellulose identification using the structure-responsive, heptameric oligothiophene h-FTAA as molecular fluorophore.

Cyclic fractionation process for using aqueous chelator and ion exchange resin.

A new approach to process algal biomass was developed using sodium citrate and a polyvalent cation-specific resin to sequentially extract the alginate into several usable fractions. The fractionation was performed in a cyclic manner, utilizing a stepwise removal of the native polyvalent ions present in the algae to isolate fractions of alginate with different solubility in the presence of these ions. Sodium citrate was used in different concentrations in the extraction solution to remove polyvalent cations to adjust the alginate liberation while AMBERLITE IRC718 resin was added to further remove these ions and regenerate the extraction solution.