Adsorption onto aluminum hydroxide adjuvant protects antigens from degradation.

Aluminum based adjuvants are widely used in commercial vaccines, since they are known to be safe and effective with a variety of antigens. The effect of antigen adsorption onto Aluminum Hydroxide is a complex area, since several mechanisms are involved simultaneously, whose impact is both antigen and formulation conditions dependent. Moreover, the mode of action of Aluminum Hydroxide is itself complex, with many mechanisms operating simultaneously.

Multiplex immunoassay for in vitro characterization of acellular pertussis antigens in combination vaccines.

Vaccines characterization is required to ensure physical, chemical, and biological integrity of antigens and adjuvants. Current analytical methods mostly require complete antigen desorption from aluminum-based adjuvants and are not always suitable to distinguish individual antigens in multivalent formulations. Here, Luminex technology is proposed to improve the analytics of vaccine characterization.

The development of self-emulsifying oil-in-water emulsion adjuvant and an evaluation of the impact of droplet size on performance.

Microfluidization is an established technique for preparing emulsion adjuvant formulations for use in vaccines. Although this technique reproducibly yields high-quality stable emulsions, it is complex, expensive, and requires proprietary equipment. For this study, we developed a novel and simple low shear process to prepare stable reproducible emulsions without the use of any proprietary equipment.

MF59 oil-in-water emulsion in combination with a synthetic TLR4 agonist (E6020) is a potent adjuvant for a combination Meningococcus vaccine.

The inclusion of a potent TLR4 immune potentiator to a recombinant antigen vaccine formulation enhances both the magnitude and the breadth of the engendered immune response. One such immune potentiator (TLR4 agonist E6020) was evaluated with recombinant Men B antigens delivered in MF59 sub-micron adjuvant emulsion. The ability of this formulation to enhance serum antibody and bactercidal titers was investigated.

Flow cytometry: an alternative method for direct quantification of antigens adsorbed to aluminum hydroxide adjuvant.

Flow cytometry (FC) has been widely used in biological research; however, its use for vaccine characterization has been very limited. Here we describe the development of an FC method for the direct quantification of two Neisseria meningitidis vaccine antigens, in mono- and multivalent formulations, while still adsorbed on aluminum hydroxide (AH) suspension. The antibody-based method is specific and sensitive.

Immunogenicity of a meningococcal native outer membrane vesicle vaccine with attenuated endotoxin and over-expressed factor H binding protein in infant rhesus monkeys.

We previously investigated immunogenicity of meningococcal native outer membrane vesicle (NOMV) vaccines prepared from recombinant strains with attenuated endotoxin (ΔLpxL1) and over-expressed factor H binding protein (fHbp) in a mouse model. The vaccines elicited broad serum bactericidal antibody responses. While human toll-like receptor 4 (TLR-4) is mainly stimulated by wildtype meningococcal endotoxin, mouse TLR-4 is stimulated by both the wildtype and mutant endotoxin.

Combination adjuvants for the induction of potent, long-lasting antibody and T-cell responses to influenza vaccine in mice.

Influenza is controlled by protective titres of neutralizing antibodies, induced with the help of CD4 T-cells, and by antiviral T-cell effector function. Adjuvants are essential for the efficient vaccination of a naïve population against avian influenza. We evaluated a range of adjuvants for their ability to enhance, in naïve mice, protective hemagglutination inhibition (HI) titres, which represent the generally accepted correlate of protection, virus-neutralizing titres and T-cell responses to a new generation influenza vaccine produced in cell culture.

Characterization of antigens adsorbed to anionic PLG microparticles by XPS and TOF-SIMS.

The chemical composition of the surface of anionic PLG microparticles before and after adsorption of vaccine antigens was measured using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). The interfacial distributions of components will reflect underlying interactions that govern properties such as adsorption, release, and stability of proteins in microparticle vaccine delivery systems. Poly(lactide-co-glycolide) microparticles were prepared by a w/o/w emulsification method in the presence of the anionic surfactant dioctyl sodium sulfosuccinate (DSS).

The potency of the adjuvant, CpG oligos, is enhanced by encapsulation in PLG microparticles.

The objective of this work was to evaluate the potency of the CpG containing oligonucleotide encapsulated within poly(lactide-co-glycolide), and coadministered with antigen adsorbed to poly(lactide-co-glycolide) microparticles (PLG particles). The formulations evaluated include, CpG added in soluble form, CpG adsorbed, and CpG encapsulated. The antigen from Neisseria meningitidis serotype B (Men B) was used in these studies.

A modified process for preparing cationic polylactide-co-glycolide microparticles with adsorbed DNA.

We have previously shown that cationic polylactide-co-glycolide (PLG) microparticles can be effectively used to adsorb DNA and generate potent immune responses in vivo. We now describe a modified and easier process containing a single lyophilization step to prepare these cationic PLG microparticles with adsorbed DNA. Cationic PLG microparticle formulations with adsorbed DNA were prepared using a modified solvent evaporation technique.

A practical approach to the use of nanoparticles for vaccine delivery.

The objective of this work was to obtain a nanoparticle formulation that could be sterile filtered, lyophilized, and resuspended to the initial size with excipients appropriate for use as a vaccine formulation. Poly(lactide-co-glycolide) (PLG) polymers were used to create nanoparticles ranging in size from 110 to 230 nm. Protein antigens were adsorbed to the particles; the protein-nanoparticles were then lyophilized with the excipients.

Polylactide-co-glycolide microparticles with surface adsorbed antigens as vaccine delivery systems.

Several groups have shown that vaccine antigens can be encapsulated within polymeric microparticles and can serve as potent antigen delivery systems. We have recently shown that an alternative approach involving charged polylactide co-glycolide (PLG) microparticles with surface adsorbed antigen(s) can also be used to deliver antigen into antigen presenting cell (APC). We have described the preparation of cationic and anionic PLG microparticles which have been used to adsorb a variety of agents, which include plasmid DNA, recombinant proteins and adjuvant active oligonucleotides.

Encapsulation of the immune potentiators MPL and RC529 in PLG microparticles enhances their potency.

Purpose: Monophosphoryl lipid A (MPL) and the synthetic LPS mimetic RC529, encapsulated in poly(lactide-co-glycolide) (PLG) microparticles, were evaluated as immune potentiators in the presence of either HIV-1 gp120 protein or antigen from Neisseria meningitidis serotype B (Men B). The immunogenicity of these formulations was evaluated in mice and compared to CpG containing oligonucleotide. This work was done as part of an ongoing effort to enhance the potency of vaccine candidates against HIV and Men B.

A preliminary evaluation of alternative adjuvants to alum using a range of established and new generation vaccine antigens.

Although alum is the most commonly used vaccine adjuvant, it has some limitations for use with the next generation recombinant antigens. We explored the use of alternative adjuvant formulations (poly lactide co-glycolide (PLG) microparticles, MF59 emulsion, CAP and l-tyrosine suspension) in comparison with five different vaccine antigens--namely, diphtheria toxoid (DT), tetanus toxoid (TT), HBsAg, Men C conjugate and MB1. The results indicated that although alum was optimal for bacterial toxoid based vaccines, it was not highly potent for MB1, Men C or HBsAg antigens.

An investigation of the factors controlling the adsorption of protein antigens to anionic PLG microparticles.

This work examines physico-chemical properties influencing protein adsorption to anionic PLG microparticles and demonstrates the ability to bind and release vaccine antigens over a range of loads, pH values, and ionic strengths. Poly(lactide-co-glycolide) microparticles were synthesized by a w/o/w emulsification method in the presence of the anionic surfactant DSS (dioctyl sodium sulfosuccinate). Ovalbumin (OVA), carbonic anhydrase (CAN), lysozyme (LYZ), lactic acid dehydrogenase, bovine serum albumin (BSA), an HIV envelope glyocoprotein, and a Neisseria meningitidis B protein were adsorbed to the PLG microparticles, with binding efficiency, initial release and zeta potentials measured.

Enhanced potency of plasmid DNA microparticle human immunodeficiency virus vaccines in rhesus macaques by using a priming-boosting regimen with recombinant proteins.

DNA vaccines have been used widely in experimental primate models of human immunodeficiency virus (HIV), but their effectiveness has been limited. In this study, we evaluated three technologies for increasing the potency of DNA vaccines in rhesus macaques. These included DNA encoding Sindbis virus RNA replicons (pSINCP), cationic poly(lactide-co-glycolide) (PLG) microparticles for DNA delivery, and recombinant protein boosting.

Adsorption of a novel recombinant glycoprotein from HIV (Env gp120dV2 SF162) to anionic PLG microparticles retains the structural integrity of the protein, whereas encapsulation in PLG microparticles does not.

Purpose: To evaluate the delivery of a novel HIV-1 antigen (gp120dV2 SF162) by surface adsorption or encapsulation within polylactide-co-glycolide microparticles and to compare both the formulations for their ability to preserve functional activity as measured by binding to soluble CD4.

Methods: Poly(lactide-co-glycolide) microparticles were synthesized by a water-in-oil-in-water (w/o/w) emulsification method in the presence of the anionic surfactant dioctylsulfosuccinate (DSS) or polyvinyl alcohol. The HIV envelope glyocoprotein was adsorbed and encapsulated in the PLG particles.

Mucosal and systemic anti-HIV responses in rhesus macaques following combinations of intranasal and parenteral immunizations.

There is an urgent need to develop vaccines that can elicit immunological memory responses against HIV. Using the rhesus macaque model and a combination of intranasal (IN) and parenteral immunizations with DNA or protein adsorbed to microparticles or mixed with mucosal adjuvants we sought to induce anti-HIV memory-type immune responses in both the mucosal and systemic compartments. Prime/boost immunizations were performed through five IN immunizations alone with HIV-env oligomeric gp140 (Ogp140) or HIV-gag-p24 mixed with Escherichia coli heat labile-derived mutant adjuvants or two parenteral immunizations with DNA encoding HIV-env or -gag adsorbed to microparticles followed by three IN immunizations with p24 gag protein and the mutant adjuvants.

Cationic microparticles are a potent delivery system for a HCV DNA vaccine.

We initially evaluated in mice the ability of naked DNA encoding intracellular forms of the E1E2 envelope proteins from HCV to induce antibody responses and compared the responses induced with the same plasmid adsorbed onto cationic poly (lactide co-glycolide) (PLG) microparticles. Although naked DNA was only able to induce detectable responses at the 100 microg dose level, making this approach impractical for evaluation in larger animals, PLG/DNA induced detectable responses at 10 microg. In addition, the PLG/DNA microparticles induced significantly enhanced responses to naked DNA when compared at the same dose level.

Charged polylactide co-glycolide microparticles as antigen delivery systems.

Polymeric microparticles with encapsulated antigens have become well-established in the last decade as potent antigen delivery systems and adjuvants, with experience being reported from many groups. However, the authors have recently shown that an alternative approach involving charged polylactide co-glycolide (PLG) microparticles with surface adsorbed antigen(s) can also be used to deliver antigen into antigen-presenting cell populations. The authors have described the preparation of cationic and anionic PLG microparticles that have been used to adsorb a variety of agents, to include plasmid DNA, recombinant proteins and adjuvant active oligonucleotides.

Anionic microparticles are a potent delivery system for recombinant antigens from Neisseria meningitidis serotype B.

The adsorption behavior of model proteins onto anionic poly(lactide-co-glycolide) (PLG) microparticles was evaluated. PLG microparticles were prepared by a w/o/w solvent evaporation process in the presence of the anionic surfactant dioctyl sodium sulfosuccinate (DSS). The effect of surfactant concentration and adsorption conditions on the adsorption efficiency and release rates in vitro was also studied.

Mechanisms of increased immunogenicity for DNA-based vaccines adsorbed onto cationic microparticles.

Investigation into the mechanism of action of vaccine adjuvants provides opportunities to define basic immune principles underlying the induction of strong immune responses and insights useful for the rational development of subunit vaccines. A novel HIV vaccine composed of plasmid DNA-encoding p55 gag formulated with poly-lactide-co-glycolide microparticles (PLG) and cetyl trimethyl ammonium bromide (CTAB) elicits both serum antibody titers and cytotoxic lymphocyte activity in mice at doses two orders of magnitude lower than those required for comparable response to plasmid DNA in saline. Using this model, we demonstrated the increase in potency requires the DNA to be complexed to the PLG-CTAB microparticles.

Enhanced mucosal and systemic immune responses to Helicobacter pylori antigens through mucosal priming followed by systemic boosting immunizations.

It is estimated that Helicobacter pylori infects the stomachs of over 50% of the world's population and if not treated may cause chronic gastritis, peptic ulcer disease, gastric adenocarcinoma and gastric B-cell lymphoma. The aim of this study was to enhance the mucosal and systemic immune responses against the H. pylori antigens cytotoxin-associated gene A (CagA) and neutrophil-activating protein (NAP), through combinations of mucosal and systemic immunizations in female BALB/c mice.

Induction of broad and potent anti-human immunodeficiency virus immune responses in rhesus macaques by priming with a DNA vaccine and boosting with protein-adsorbed polylactide coglycolide microparticles.

Several vaccine technologies were evaluated for their abilities to induce anti-human immunodeficiency virus Gag immune responses in rhesus macaques. While no vaccine alone was able to induce broad and strong immune responses, these were achieved by priming with Gag DNA and boosting with Gag protein adsorbed to polylactide coglycolide microparticles. This regimen elicited strong antibodies, helper T cells, and cytotoxic T lymphocytes and thus holds promise as an effective vaccination scheme.