A Functionalized 3D-Printed Ti6Al4V "Cell Climbing Frame" Inspired by Marine Sponges to Recruit and Rejuvenate Autologous BMSCs in Osteoporotic Bone Repair.

Osteoporosis, characterized by low bone mass and high fracture risk, challenges orthopedic implant design. Conventional 3D-printed Ti6Al4V scaffolds are mechanically robust but suffer from poor bone regeneration in osteoporotic patients due to stress shielding and cellular senescence. In this study, a functionalized 3D-printed Ti6Al4V "Cell Climbing Frame" is developed, aiming to adapt to the mechanical microenvironment of osteoporosis, effectively recruit and support the adhesion and growth of autologous bone marrow mesenchymal stem cells (BMSCs), while rejuvenating senescent cells for improved bone regeneration.

Semi-quantitative scoring criteria based on multiple staining methods combined with machine learning to evaluate residual nuclei in decellularized matrix.

The detection of residual nuclei in decellularized extracellular matrix (dECM) biomaterials is critical for ensuring their quality and biocompatibility. However, current evaluation methods have limitations in addressing impurity interference and providing intelligent analysis. In this study, we utilized four staining techniques-hematoxylin-eosin staining, acetocarmine staining, the Feulgen reaction and 4',6-diamidino-2-phenylindole staining-to detect residual nuclei in dECM biomaterials.

Anchoring of Probiotic-Membrane Vesicles in Hydrogels Facilitates Wound Vascularization.

Inadequate vascularization significantly hampers wound recovery by limiting nutrient delivery. To address this challenge, we extracted membrane vesicles from (LMVs) and identified their angiogenic potential via transcriptomic analysis. We further developed a composite hydrogel system (Gel-LMVs) by anchoring LMVs within carboxylated chitosan and cross-linking it with oxidized hyaluronic acid through a Schiff base reaction.

A ceramic microbridge microfluidic chip to study osteogenic differentiation of mesenchymal stem cells in bioactive ceramic immune microenvironment.

Bioactive ceramics have been used in bone tissue repair and regeneration. However, because of the complex in vivo osteogenesis process, long cycle, and difficulty of accurately tracking, the mechanism of interaction between materials and cells has yet to be fully understood, hindering its development. The ceramic microbridge microfluidic chip system may solve the problem and provide an in vitro method to simulate the microenvironment in vivo.

Microenvironment-responsive release of Mg from tannic acid decorated and multilevel crosslinked hydrogels accelerates infected wound healing.

The management of chronic infected wounds poses significant challenges due to frequent bacterial infections, high concentrations of reactive oxygen species, abnormal immune regulation, and impaired angiogenesis. This study introduces a novel, microenvironment-responsive, dual dynamic, and covalently bonded hydrogel, termed OHA-P-TA/G/Mg. It is derived from the reaction of tannic acid (TA) with phenylboronic acids (PBA), which are grafted onto oxidized hyaluronic acid (OHA-P-TA), combined with GelMA (G) a Schiff base and chemical bonds, along with the incorporation of Mg.

An injectable cartilage-coating composite with long-term protection, effective lubrication and chondrocyte nourishment for osteoarthritis treatment.

The osteoarthritic (OA) environment within articular cartilage poses significant challenges, resulting in chondrocyte dysfunction and cartilage matrix degradation. While intra-articular injections of anti-inflammatory drugs, biomaterials, or bioactive agents have demonstrated some effectiveness, they primarily provide temporary relief from OA pain without arresting OA progression. This study presents an injectable cartilage-coating composite, comprising hyaluronic acid and decellularized cartilage matrix integrated with specific linker polymers.

High-Density Dynamic Bonds Cross-Linked Hydrogel with Tissue Adhesion, Highly Efficient Self-Healing Behavior, and NIR Photothermal Antibacterial Ability as Dressing for Wound Repair.

Multifunctional hydrogels with tissue adhesion, self-healing behavior, and antibacterial properties have potential in wound healing applications. However, their inefficient self-healing behavior and antibacterial agents can cause long-term cytotoxicity and drug resistance, considerably limiting their clinical use. Herein, we reported a PDA@LA hydrogel constructed by introducing polydopamine nanoparticles (PDA-NPs) into a high-density dynamic bonds cross-linked lipoic acid (LA) hydrogel that was formed by the polymerization of LA.

Research on triamcinolone-loaded thermosensitive chitosan hydrogels for preventing esophageal stricture induced by endoscopic submucosal dissection.

Early-stage esophageal cancer is primarily treated by endoscopic submucosal dissection (ESD). However, extensive mucosal dissection creates a significant risk of postoperative esophageal stricture. Clinically, postoperative stricture can be prevented by glucocorticoids; however, there are drawbacks to both systemic and local administration of glucocorticoids, and improving drug administration methods is crucial.

Polyvinyl-alcohol, chitosan and graphene-oxide composed conductive hydrogel for electrically controlled fluorescein sodium transdermal release.

Accurate and controlled release of drug molecules is crucial for transdermal drug delivery. Electricity, as an adjustable parameter, offers the potential for precise and controllable drug delivery. However, challenges exist in selecting the appropriate drug carrier, electrical parameters, and release model to achieve controlled electronic drug release.

Nanocomposite hydrogel based on chitosan/laponite for sealing and repairing tracheoesophageal fistula.

Tracheoesophageal fistula (TEF) is an abnormal connection between the trachea and esophagus that severely impairs quality of life. Current treatment options have limitations, including conservative treatment, surgical repair, and esophageal stent implantation. Here, we introduced laponite (LP) nano-clay to improve chitosan-based hydrogels' rheological properties and mechanical properties and developed an endoscopically injectable nanocomposite shear-thinning hydrogel to seal and repair fistulas as an innovative material for the treatment of TEF.

Cell-Free Osteoarthritis Treatment with Sustained-Release of Chondrocyte-Targeting Exosomes from Umbilical Cord-Derived Mesenchymal Stem Cells to Rejuvenate Aging Chondrocytes.

As chondrocytes from osteoarthritic cartilage usually exhibit aging and senescent characteristics, targeting aging chondrocytes could be a potential therapeutic strategy. In this study, exosomes derived from umbilical cord-derived mesenchymal stem cells (UCMSC-EXOs) combined with the chondrocyte-targeting capacity and controlled-release system were proposed for osteoarthritis (OA) treatment via rejuvenating aging chondrocytes. The essential functional miRNAs within UCMSC-EXOs were investigated, with the p53 signaling pathway identified as the key factor.

Construction of Microfluidic Chip Structure for Cell Migration Studies in Bioactive Ceramics.

Cell migration is an essential bioactive ceramics property and critical for bone induction, clinical application, and mechanism research. Standardized cell migration detection methods have many limitations, including a lack of dynamic fluid circulation and the inability to simulate cell behavior in vivo. Microfluidic chip technology, which mimics the human microenvironment and provides controlled dynamic fluid cycling, has the potential to solve these questions and generate reliable models of cell migration in vitro.

A chitosan-optimized polyethyleneimine/polyacrylic acid multifunctional hydrogel for reducing the risk of ulcerative arterial bleeding.

Ulcerative arterial bleeding is characterized by sudden onset, rapid disease development, and high mortality, which is a great challenge for clinicians to treat, specially bleeding in areas where endoscopic operation is difficult, or in the case of diffuse bleeding, tumor bleeding, and recurrent bleeding. Herein, we proposed a novel treatment strategy using biomaterials to protect the wound and isolate the erosion of digestive tract contents to prevent arterial bleeding in advance. By introducing chitosan to construct multihydrogen-bonding and an electrostatic interaction system, we developed polyethyleneimine/polyacrylic acid/chitosan (PEI/PAA/CS) multifunctional hydrogel.

Design and validation of performance-oriented injectable chitosan thermosensitive hydrogels for endoscopic submucosal dissection.

Endoscopic submucosal dissection (ESD) is a challenging procedure. The use of biomaterials to improve the operator's convenience (operating affinity) has received little attention. We prepared two thermosensitive hydrogels, lactobionic acid-modified chitosan/chitosan/β-glycerophosphate thermosensitive hydrogel (hydrogel 1) and its lyophilized powders (hydrogel 2), characterized their physicochemical properties and evaluated their performance in ESD experiments on large animals, by comparing with the commonly used normal saline (NS) and glycerin fructose (GF).

Vanillin enhances the antibacterial and antioxidant properties of polyvinyl alcohol-chitosan hydrogel dressings.

Wound management requires the preparation of controllable, safe and effective dressings to isolate the wound from the external environment. Currently, widely used commercial dressings focus on the isolation effect rather than an environment conducive to wound healing. To provide the dressing with beneficial properties such as wetting and antioxidant and antibacterial activity, this study used polyvinyl alcohol (PVA) hydrogel as the base material and introduced chitosan (CS) and vanillin (V) to design a PVA/CS/V three-phase hydrogel dressing.

A simple, safe and easily accessible polyvinyl alcohol hydrogel for wound cleaning.

Acute wounds are often contaminated by some kind of filth, and fluids are usually used to wash away the dirt, but the force of the fluid may cause secondary injury at the wound site or even increase the risk of infection. Hydrogels have several advantages over liquid scouring since they are less intense, more portable, and easier to control. In this study, poly(vinyl alcohol) was used to prepared a series of hydrogels, which were tested in terms of their properties and abilities to clean simulated dirty wounds.

Chitosan thermosensitive hydrogels based on lyophilizate powders demonstrate significant potential for clinical use in endoscopic submucosal dissection procedures.

The goal of this study was to develop intraoperative biomaterials for use in endoscopic submucosal dissection (ESD) procedures that are stable during storage, easy to use, and effective in clinical practice. Therefore, injectable thermosensitive hydrogels were developed based on lactobionic acid-modified chitosan/chitosan/β-glycerophosphate (CSLA/CS/GP) hydrogel lyophilizate powders, and their properties were compared with original hydrogels that had not been freeze-dried. The results indicated that the lyophilizate powders retained their thermosensitive properties, and gels could be formed within 5 min at 37 °C.

Lactobionic acid-modified chitosan thermosensitive hydrogels that lift lesions and promote repair in endoscopic submucosal dissection.

To develop a biomaterial to lift the lesion and promote wound healing in endoscopic submucosal dissection (ESD), we used lactobionic acid (LA) to improve the water solubility of chitosan (CS) and prepared a new three-phase hydrogel system with lactobionic acid-modified chitosan/chitosan/β-glycerophosphate (CSLA/CS/GP). The results indicated that the hydrogel retains temperature-sensitive properties, and CSLA obviously improved the low-temperature fluidity of the hydrogel precursor solution, enabling injection of the hydrogel by endoscopic needle. The mechanical strength and bio-adhesion of the hydrogels were also improved by the addition of CSLA and the hydrogels could be maintained in acidic environment for a few days and exhibit greater protection of cells.

Evaluating platelet activation related to the degradation products of biomaterials using molecular markers.

Increasing numbers of biodegradable medical devices may be used in the circulatory system. The effects of the released degradation products from these medical devices on the blood may be gradual and cumulative. When they reach critical levels, they may cause thrombosis and other complications.

Feasibility study of use of rabbit blood to evaluate platelet activation by medical devices.

It is important to ascertain platelet responses to blood-contacting medical devices as part of a complete hemocompatibility evaluation. Nevertheless, researchers often face the problem of insufficient quantities of human blood for evaluation of platelet activation by actual medical devices. If animal blood can replace human blood to evaluate platelet activation by medical devices, testing will be smoother and will aid for quality control of related products.

Evaluating platelet activation related to the degradation of biomaterials using molecular markers.

The effective assessment of platelet activation is an important component of the evaluation of cardiovascular implants. Currently, most evaluation is performed based on the ISO 10993-4 international standard. However, the methods specified in this standard were originally designed for non-degradable materials, and the applicability of these methods to evaluate degradable materials has not been carefully assessed.

Development of chitosan/glycerophosphate/collagen thermo-sensitive hydrogel for endoscopic treatment of mucosectomy-induced ulcer.

Endoscopic submucosal dissection (ESD) is a useful tool for the treatment of early gastric neoplasms, however post-ESD bleeding and perforation restrict its widespread application. In this study, we developed the chitosan/β-glycerophosphate/collagen (CS/GP/Col) thermo-sensitive systems to satisfy the requirements for the endoscopic treatment for ESD-induced ulcer. The results indicated that the addition of collagen to CS/GP system did not lead to remarkable changes on the physicochemical properties of the systems, which can transform from solution to hydrogels under physiological temperature within 90s, technically makes it suitable to be applied through catheter to gastric ulcer during ESD operation.

[The in vivo thrombosis evaluation for the biodegradable polymer stent].

New biodegradable intravascular stent can reduce risk of foreign bodies retained, thus, it is widely concerned and some of the products have been introduced into the clinic. However, the characteristic of biodegradable may lead to more safety concerns associated with thrombosis. To ensure the safety, the thrombus formation experiment needs to be carefully designed and evaluated based on GB/T 16886.

Hydroxypropylcellulose enhanced high viscosity endoscopic mucosal dissection intraoperative chitosan thermosensitive hydrogel.

In order to prepare a submucosal injection agent that can gel during the endoscopic mucosal dissection (ESD) and still adhere to the wound surface after the surgery to reduce intraoperative and postoperative complications, a thermosensitive hydrogel based on chitosan/β-glycerophosphate (CS-GP) was constructed. Hydroxypropylcellulose (HPC) and collagen Ⅰ were added into the hydrogel to improve the adhesion ability, viscosity and biocompatibility. The effect of HPC on the viscosity, strength and bio-adhesion and collagen Ⅰ on the biocompatibility and promoting on the wound restoration were intensively studied.