Pyridine-mediated B-B bond cleavage of tetrahydroxydiboron to synthesize n-doped SWCNTs with long-term air stability.

Neutral radicals, including carbon radicals, are highly useful chemical species for the functionalization of semiconducting materials to change their electrical and optical properties owing to their high reactivity. However, boron radicals have been limited to synthetic and reaction chemistry, with rare utilization in materials science. In this study, a mixture of tetrahydroxydiboron (B(OH)) and pyridine derivatives was found to act as an electron dopant for single-walled carbon nanotubes (SWCNTs) because of the electron transfer from pyridine-mediated boron radicals generated by B-B bond dissociation to neutral radicals.

Predicting the anion conductivities and alkaline stabilities of anion conducting membrane polymeric materials: development of explainable machine learning models.

Anion exchange membranes (AEMs) are core components in fuel cells and water electrolyzers, which are crucial to realize a sustainable hydrogen society. The low anion conductivity and durability of AEMs have hindered the commercialization of AEM-based devices, and research and development (R&D) to improve AEM materials is often resource-intensive. Although machine learning (ML) is commonly used in many fields to accelerate R&D while reducing resource consumption, it is rarely used in the AEM field.

-Substituted Aryldiazonium Design for the Defect Configuration-Controlled Photoluminescent Functionalization of Chiral Single-Walled Carbon Nanotubes.

Defect functionalization of single-walled carbon nanotubes (SWCNTs) by chemical modification is a promising strategy for near-infrared photoluminescence (NIR PL) generation at >1000 nm, which has advanced telecom and bio/medical applications. The covalent attachment of molecular reagents generates sp-carbon defects in the sp-carbon lattice of SWCNTs with bright red-shifted PL generation. Although the positional difference between proximal sp-carbon defects, labeled as the defect binding configuration, can dominate NIR PL properties, the defect arrangement chemistry remains unexplored.

Azide modification forming luminescent sp defects on single-walled carbon nanotubes for near-infrared defect photoluminescence.

Azide functionalization produced luminescent sp-type defects on single-walled carbon nanotubes, by which defect photoluminescence appeared in near infrared regions (1116 nm). Changes in exciton properties were induced by localization effects at the defect sites, creating exciton-engineered nanomaterials based on the defect structure design.

Protein-structure-dependent spectral shifts of near-infrared photoluminescence from locally functionalized single-walled carbon nanotubes based on avidin-biotin interactions.

Single-walled carbon nanotubes (SWCNTs) emit photoluminescence (PL) in the near-infrared (NIR) region (>900 nm). To enhance their PL properties, defect doping local chemical functionalization has been developed. The locally functionalized SWCNTs (lf-SWCNTs) emit red-shifted and bright * PL originating from the excitons localized at the defect-doped sites.

Polymer-coated carbon nanotube hybrids with functional peptides for gene delivery into plant mitochondria.

The delivery of genetic material into plants has been historically challenging due to the cell wall barrier, which blocks the passage of many biomolecules. Carbon nanotube-based delivery has emerged as a promising solution to this problem and has been shown to effectively deliver DNA and RNA into intact plants. Mitochondria are important targets due to their influence on agronomic traits, but delivery into this organelle has been limited to low efficiencies, restricting their potential in genetic engineering.

Antibody-Conjugated Gel-Coated Single-Walled Carbon Nanotubes as Photothermal Agents.

Photothermal therapy (PTT) using near-infrared (NIR) light is an attractive treatment modality for cancer, in which photothermal agents absorb energy from photons and convert it into thermal energy to lead to cancer cell death. Among the various organic and inorganic materials, single-walled carbon nanotubes (SWCNTs) are promising candidates for NIR photothermal agents due to their strong absorption in this region as well as their high photothermal conversion efficiency. In the development of the SWCNT-based PTT materials, modifications of SWCNTs to offer a stable dispersion for biocompatibility as well as to target the tumor of choice while maintaining their NIR absorption have been required.

Electron doping of single-walled carbon nanotubes using pyridine-boryl radicals.

Pyridine-boryl (py-boryl) radicals serve as efficient electron-doping reagents for single-walled carbon nanotubes (SWCNTs). The doping mechanism comprises electron transfer from the py-boryl radical to the SWCNT. The formation of a stable py-boryl cation is essential for efficient doping; the captodative effect of the py-boryl cation is important to this process.

Control of anisotropic conduction of carbon nanotube sheets and their use as planar-type thermoelectric conversion materials.

The large anisotropic thermal conduction of a carbon nanotube (CNT) sheet that originates from the in-plane orientation of one-dimensional CNTs is disadvantageous for thermoelectric conversion using the Seebeck effect since the temperature gradient is difficult to maintain in the current flow direction. To control the orientation of the CNTs, polymer particles are introduced as orientation aligners upon sheet formation by vacuum filtration. The thermal conductivities in the in-plane direction decrease as the number of polymer particles in the sheet increases, while that in the through-plane direction increases.

Thermoelectric Properties of Thin Films from Sorted Single-Walled Carbon Nanotubes.

Single-walled carbon nanotubes (SWCNTs) remain one of the most promising materials of our times. One of the goals is to implement semiconducting and metallic SWCNTs in photonics and microelectronics, respectively. In this work, we demonstrated how such materials could be obtained from the parent material by using the aqueous two-phase extraction method (ATPE) at a large scale.

Supramolecular Chemistry-Based One-Pot High-Efficiency Separation of Solubilizer-Free Pure Semiconducting Single-Walled Carbon Nanotubes: Molecular Strategy and Mechanism.

Single-walled carbon nanotubes (SWCNTs) have the potential to revolutionize nanoscale electronics and power sources; however, their low purity and high separation cost limit their use in practical applications. Here we present a supramolecular chemistry-based one-pot, less expensive, scalable, and highly efficient separation of a solubilizer/adsorbent-free pure semiconducting SWCNT (sc-SWCNT) using flavin/isoalloxazine analogues with different substituents. On the basis of both experimental and computational simulations (DFT study), we have revealed the molecular requirements of the solubilizers as well as provided a possible mechanism for such a highly efficient selective sc-SWCNT separation.

Alkaline Stability of Anion-Conductive Ionomer Coated on a Carbon Surface.

Anion-exchange membrane fuel cells (AEMFCs) are promising technologies that allow the use of nonprecious metals as catalysts because the oxidation reduction reaction at the cathode occurs readily at the high pH of AEMFCs. However, the insufficient chemical stability of the anion-conductive materials in AEMFCs currently limits their development. We studied the chemical stability of the electrolyte in the catalyst layer of AEMFCs containing cationic dimethyl polybenzimidazole (mPBI).

Brighter near-IR emission of single-walled carbon nanotubes modified with a cross-linked polymer coating.

Photoluminescence (PL) in the near-infrared (NIR) region is an attractive feature of single-walled carbon nanotubes (SWNTs). In this study, we investigated the effect of the chemical structure of the cross-linked polymer coating of polymer-coated SWNTs on the NIR PL emission intensity. We found that brighter NIR emission can be achieved using a more hydrophobic polymer coating.

Thermoelectric properties of sorted semiconducting single-walled carbon nanotube sheets.

Single-walled carbon nanotubes (SWNTs), especially their semiconducting type, are promising thermoelectric (TE) materials due to their high Seebeck coefficient. In this study, the in-plane Seebeck coefficient (), electrical conductivity (), and thermal conductivity () of sorted semiconducting SWNT (s-SWNT) free-standing sheets with different s-SWNT purities are measured to determine the figure of merit We find that the value of the sheets increases with increasing s-SWNT purity, mainly due to an increase in Seebeck coefficient while the thermal conductivity remaining constant, which experimentally proved the superiority of the high purity s-SWNT as TE materials for the first time. In addition, from the comparison between sorted and unsorted SWNT sheets, it is recognized that the difference of between unsorted SWNT and high-purity s-SWNT sheet is not remarkable, which suggests the control of carrier density is necessary to further clarify the superiority of SWNT sorting for TE applications.

Solvatochromism of near infrared photoluminescence from doped sites of locally functionalized single-walled carbon nanotubes.

The doped sites of locally functionalized single-walled carbon nanotubes emit red-shifted and bright near-infrared photoluminescence compared to non-doped nanotubes. Here, we observe unique photoluminescent solvatochromism. Organic solvent environments induce photoluminescent energy shifts that linearly correlate with a solvent polarity function.

Single-step isolation of carbon nanotubes with narrow-band light emission characteristics.

Lack of necessary degree of control over carbon nanotube (CNT) structure has remained a major impediment factor for making significant advances using this material since it was discovered. Recently, a wide range of promising sorting methods emerged as an antidote to this problem, all of which unfortunately have a multistep nature. Here we report that desired type of CNTs can be targeted and isolated in a single step using modified aqueous two-phase extraction.

Multistep Wavelength Switching of Near-Infrared Photoluminescence Driven by Chemical Reactions at Local Doped Sites of Single-Walled Carbon Nanotubes.

Local chemical functionalization is used for defect doping of single-walled carbon nanotubes (SWNTs), to develop near-infrared photoluminescence (NIR PL) properties. We report the multistep wavelength shifting of the NIR PL of SWNTs through chemical reactions at local doped sites tethered to an arylaldehyde group. The PL wavelength of the doped SWNTs is modulated based on imine chemistry.

Synthesis of Single-Walled Carbon Nanotubes Coated with Thiol-Reactive Gel via Emulsion Polymerization.

Single-walled carbon nanotubes (SWNTs) have unique near-infrared absorption and photoemission properties that are attractive for in vivo biological applications such as photothermal cancer treatment and bioimaging. Therefore, a smart functionalization strategy for SWNTs to create biocompatible surfaces and introduce various ligands to target active cancer cells without losing the unique optical properties of the SWNTs is strongly desired. This paper reports the design and synthesis of a SWNT/gel hybrid containing maleimide groups, which react with various thiol compounds through Michael addition reactions.

Control of the Near Infrared Photoluminescence of Locally Functionalized Single-Walled Carbon Nanotubes via Doping by Azacrown-Ether Modification.

Doped semiconducting single-walled carbon nanotubes (SWNTs) through local chemical functionalization (lf-SWNTs) show fascinating photoluminescence (PL) that appears with a longer wavelength and enhanced quantum yield compared to the original PL of non-modified SWNTs. In this study, we introduce an azacrown ether moiety at the doped sites of lf-SWNTs (CR-lf-SWNTs), and observe selective PL wavelength shifts depending on different interaction modes of silver ion inclusion and protonation of the amino group in the ring. Interestingly, their different values of the wavelength shifts show a clear correlation with calculated electron density of the nitrogen atom in the azacrown moiety in case of the inclusion form and the protonated form.

Gold Nanoparticles on Polymer-Wrapped Carbon Nanotubes: An Efficient and Selective Catalyst for the Electroreduction of CO.

Multiple approaches will be needed to reduce the atmospheric CO levels, which have been linked to the undesirable effects of global climate change. The electroreduction of CO driven by renewable energy is one approach to reduce CO emissions while producing chemical building blocks, but current electrocatalysts exhibit low activity and selectivity. Here, we report the structural and electrochemical characterization of a promising catalyst for the electroreduction of CO to CO: Au nanoparticles supported on polymer-wrapped multiwall carbon nanotubes.

Decorating unoxidized-carbon nanotubes with homogeneous Ni-Co spinel nanocrystals show superior performance for oxygen evolution/reduction reactions.

We present a new concept for homogeneous spinel nanocrystal-coating on high crystalline pristine-carbon nanotubes (CNTs) for efficient and durable oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Oxidized CNTs have widely been used to functionalize with metal or metal oxides since the defect sites act as anchoring for metal oxide binding. However, such defects on the tubes cause the decrease in electrical conductivity and stability, leading to lower catalyst performance.

Improved Durability of Electrocatalyst Based on Coating of Carbon Black with Polybenzimidazole and their Application in Polymer Electrolyte Fuel Cells.

Improvement of durability of the electrocatalyst has been the key issue to be solved for the practical application of polymer electrolyte membrane fuel cells. One of the promising strategies to improve the durability is to enhance the oxidation stability of the carbon-supporting materials. In this report, we describe in detail the mechanism of the stability improvement of carbon blacks (CBs; Vulcan and Ketjen) by coating with polybenzimidazole (PBI).

Growth and Deposition of Au Nanoclusters on Polymer-wrapped Graphene and Their Oxygen Reduction Activity.

The development of a non-Pt electrocatalyst with a high performance for the oxygen reduction reaction (ORR) is one of the central issues in polymer electrolyte fuel cells science. Au-nanoparticles (Au-NPs) with a diameter of <2 nm are one of the promising substitutes of Pt-NPs; however, it is still a challenge to synthesize such a small-sized Au-NPs with a narrow diameter distribution on a carbon support without using capping agents. We here describe a facile method to deposit uniform Au-NPs (diameter = 1.