Photoelectrochemical N -to-NH Fixation with High Efficiency and Rates via Optimized Si-Based System at Positive Potential versus Li.

As a widely used commodity chemical, ammonia is critical for producing nitrogen-containing fertilizers and serving as the promising zero-carbon energy carrier. Photoelectrochemical nitrogen reduction reaction (PEC NRR) can provide a solar-powered green and sustainable route for synthesis of ammonia (NH ). Herein, an optimum PEC system is reported with an Si-based hierarchically-structured PdCu/TiO /Si photocathode and well-thought-out trifluoroethanol as the proton source for lithium-mediated PEC NRR, achieving a record high NH yield of 43.

Compression Stress-Induced Internal Magnetic Field in Bulky TiO Photoanodes for Enhancing Charge-Carrier Dynamics.

Enhancing charge-carrier dynamics is imperative to achieve efficient photoelectrodes for practical photoelectrochemical devices. However, a convincing explanation and answer for the important question which has thus far been absent relates to the precise mechanism of charge-carrier generation by solar light in photoelectrodes. Herein, to exclude the interference of complex multi-components and nanostructuring, we fabricate bulky TiO photoanodes through physical vapor deposition.

Role of the redox state of cerium oxide on glycine adsorption: an experimental and theoretical study.

The role of the oxidation state of cerium cations in a thin oxide film in the adsorption, geometry, and thermal stability of glycine molecules was studied. The experimental study was performed for a submonolayer molecular coverage deposited in vacuum on CeO(111)/Cu(111) and CeO(111)/Cu(111) films by photoelectron and soft X-ray absorption spectroscopies and supported by calculations for prediction of the adsorbate geometries, C 1s and N 1s core binding energies of glycine, and some possible products of the thermal decomposition. The molecules adsorbed on the oxide surfaces at 25 °C in the anionic form the carboxylate oxygen atoms bound to cerium cations.

Size dependent electronic structure of LiFePO probed using X-ray absorption and Mössbauer spectroscopy.

We present the combined Mössbauer and X-ray absorption spectroscopy investigation of the electronic structure and local site symmetry of Fe in olivine structured LiFePO (LFP) with crystallite size (CS). The lattice parameters are found to contract with a decrease in CS, monotonously, whereas the electronic structural parameters exhibit two different regions with a threshold anomaly of around ≈30 nm. Fe Mössbauer studies reveal the coexistence of Fe and Fe sites and their relative concentrations are mainly determined by CS, which provides a comprehensive insight into the electronic structure of LFP at the mesoscopic level.

Redox-mediated C-C bond scission in alcohols adsorbed on CeOthin films.

The decomposition mechanisms of ethanol and ethylene glycol on well-ordered stoichiometric CeO(111) and partially reduced CeO(111) films were investigated by means of synchrotron radiation photoelectron spectroscopy, resonant photoemission spectroscopy, and temperature programmed desorption. Both alcohols partially deprotonate upon adsorption at 150 K and subsequent annealing yielding stable ethoxy and ethylenedioxy species. The C-C bond scission in both ethoxy and ethylenedioxy species on stoichiometric CeO(111) involves formation of acetaldehyde-like intermediates and yields CO and COaccompanied by desorption of acetaldehyde, HO, and H.

Effect of the Titanium Self-Intercalation on the Electronic Structure of TiSe.

The effect of the superstoichiometric Ti intercalation on the electronic structure of TiSe was studied by using X-ray photoelectron spectroscopy in nonresonant and resonant modes along with the DOS (density of states) calculations. It was shown that the presence of the Ti atoms in the interlayer space leads to the formation of the Ti 3d/Ti 3d hybridized band between the Ti atoms in the regular lattice positions and Ti atoms in the interlayer space. The charge transfer to the conduction band was not observed in this case.

Cobalt Oxide-Supported Pt Electrocatalysts: Intimate Correlation between Particle Size, Electronic Metal-Support Interaction and Stability.

Oxide supports can modify and stabilize platinum nanoparticles (NPs) in electrocatalytic materials. We studied related phenomena on model systems consisting of Pt NPs on atomically defined CoO(111) thin films. Chemical states and dissolution behavior of model catalysts were investigated as a function of the particle size and the electrochemical potential by ex situ emersion synchrotron radiation photoelectron spectroscopy and by online inductively coupled plasma mass spectrometry.

Probing the Roughness of Porphyrin Thin Films with X-ray Photoelectron Spectroscopy.

Thin-film growth of molecular systems is of interest for many applications, such as for instance organic electronics. In this study, we demonstrate how X-ray photoelectron spectroscopy (XPS) can be used to study the growth behavior of such molecular systems. In XPS, coverages are often calculated assuming a uniform thickness across a surface.

Chemical bonds in intercalation compounds CuTiCh (Ch = S, Te).

A thorough study of the chemical bonding between intercalated copper and host lattice TiCh (Ch = S, Te) was performed. In order to separate the contributions of the copper, titanium, and chalcogen states into the electronic structure of the valence band, photoelectron spectroscopy in nonresonant and resonant (Cu 3p-3d and Ti 2p-3d) excitation modes was used. It is shown that the ionicity of the chemical bond between copper and host lattice is decreased in the TiS → TiSe → TiTe row.

Charge transfer and spillover phenomena in ceria-supported iridium catalysts: A model study.

Iridium-based materials are among the most active bifunctional catalysts in heterogeneous catalysis and electrocatalysis. We have investigated the properties of atomically defined Ir/CeO(111) model systems supported on Cu(111) and Ru(0001) by means of synchrotron radiation photoelectron spectroscopy, resonant photoemission spectroscopy, near ambient pressure X-ray photoelectron spectroscopy (NAP XPS), scanning tunneling microscopy, and temperature programmed desorption. Electronic metal-support interactions in the Ir/CeO(111) system are accompanied by charge transfer and partial reduction of CeO(111).

Interfacial Reactions of Tetraphenylporphyrin with Cobalt-Oxide Thin Films.

We have studied the adsorption and interfacial reactions of 2H-tetraphenylporphyrin (2HTPP) with cobalt-terminated Co O (111) and oxygen-terminated CoO(111) thin films using synchrotron-radiation X-ray photoelectron spectroscopy. Already at 275 K, we find evidence for the formation of a metalated species, most likely CoTPP, on both surfaces. The degree of self-metalation increases with temperature on both surfaces until 475 K, where the metalation is almost complete.

Super-bandgap light stimulated reversible transformation and laser-driven mass transport at the surface of AsS chalcogenide nanolayers studied .

The super-bandgap laser irradiation of the prepared As-S chalcogenide films was found to cause drastic structural transformations and unexpected selective diffusion processes, leading to As enrichment on the nanolayer surface. Excitation energy dependent synchrotron radiation photoelectron spectroscopy showed complete reversibility of the molecular transformations and selective laser-driven mass transport during "laser irradiation"-"thermal annealing" cycles. Molecular modeling and density functional theory calculations performed on As-rich cage-like clusters built from basic structural units indicate that the underlying microscopic mechanism of laser induced transformations is connected with the realgar-pararealgar transition in the As-S structure.

Room-Temperature Atomic-Layer-Deposited Al O Improves the Efficiency of Perovskite Solar Cells over Time.

Electrical characterisation of perovskite solar cells consisting of room-temperature atomic-layer-deposited aluminium oxide (RT-ALD-Al O ) film on top of a methyl ammonium lead triiodide (CH NH PbI ) absorber showed excellent stability of the power conversion efficiency (PCE) over a long time. Under the same environmental conditions (for 355 d), the average PCE of solar cells without the ALD layer decreased from 13.6 to 9.

Structure-Dependent Dissociation of Water on Cobalt Oxide.

Understanding the correlation between structure and reactivity of oxide surfaces is vital for the rational design of catalytic materials. In this work, we demonstrate the exceptional degree of structure sensitivity of the water dissociation reaction for one of the most important materials in catalysis and electrocatalysis. We studied HO on two atomically defined cobalt oxide surfaces, CoO(100) and CoO(111).

An experimental and theoretical study of adenine adsorption on Au(111).

A model study of adenine adsorption on the Au(111) surface is reported for molecular adlayers prepared by evaporation in vacuum and deposition from saturated aqueous solution. The electronic structure and adsorption geometry of the molecular films were studied experimentally by X-ray photoelectron spectroscopy and near edge X-ray absorption fine structure spectroscopy. Adsorption models are proposed for the adlayers arising from the different preparation methods.

Decomposition of Methanol on Mixed CuO-CuWO Surfaces.

Mixed CuO(2 × 1)-CuWO layers on a Cu(110) surface have been prepared by the on-surface reaction of the CuO(2 × 1) surface oxide with adsorbed (WO) clusters. The adsorption and decomposition of methanol on these well-defined CuO-CuWO surfaces has been followed by high-resolution X-ray photoelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HREELS), and temperature-programmed desorption (TPD) to assess the molecular surface species and their concentration, while the state of the surface oxide phases before and after methanol decomposition has been characterized by scanning tunneling microscopy (STM), low energy electron diffraction (LEED), and XPS. Surface methoxy species form the primary methanol decomposition products, which desorb partly by recombination as methanol at 200-300 K or decompose into CH and possibly CO.

Interfacial interactions between CoTPP molecules and MgO(100) thin films.

We have investigated the interactions between cobalt(ii)-tetraphenylporphyrin (CoTPP) molecules and MgO(100) thin films on Ag(100) by means of Synchrotron Radiation X-Ray and Ultra-Violet Photoelectron Spectroscopy (SR-XPS and SR-UPS). At room temperature, the CoTPP monolayer consists of two different species. A minority of molecules exhibits a strong electronic interaction with the substrate, whereas for the majority a similar spectroscopic signature as for multilayer molecules is observed.

Growth of transition metals on cerium tungstate model catalyst layers.

Two model catalytic metal/oxide systems were investigated by photoelectron spectroscopy and scanning tunneling microscopy. The mixed-oxide support was a cerium tungstate epitaxial thin layer grown in situ on the W(1 1 0) single crystal. Active particles consisted of palladium and platinum 3D islands deposited on the tungstate surface at 300 K.

Reactivity of atomically dispersed Pt(2+) species towards H2: model Pt-CeO2 fuel cell catalyst.

The reactivity of atomically dispersed Pt(2+) species on the surface of nanostructured CeO2 films and the mechanism of H2 activation on these sites have been investigated by means of synchrotron radiation photoelectron spectroscopy and resonant photoemission spectroscopy in combination with density functional calculations. Isolated Pt(2+) sites are found to be inactive towards H2 dissociation due to high activation energy required for H-H bond scission. Trace amounts of metallic Pt are necessary to initiate H2 dissociation on Pt-CeO2 films.

Counting electrons on supported nanoparticles.

Electronic interactions between metal nanoparticles and oxide supports control the functionality of nanomaterials, for example, the stability, the activity and the selectivity of catalysts. Such interactions involve electron transfer across the metal/support interface. In this work we quantify this charge transfer on a well-defined platinum/ceria catalyst at particle sizes relevant for heterogeneous catalysis.

Adenine adlayers on Cu(111): XPS and NEXAFS study.

The adsorption of adenine on Cu(111) was studied by photoelectron and near edge x-ray absorption fine structure spectroscopy. Disordered molecular films were deposited by means of physical vapor deposition on the substrate at room temperature. Adenine chemisorbs on the Cu(111) surface with strong rehybridization of the molecular orbitals and the Cu 3d states.

Functionalisation and immobilisation of an Au(110) surface via uracil and 2-thiouracil anchored layer.

We study surface functionalisation by uracil and 2-thiouracil, and immobilisation of several DNA moieties on functionalised gold surfaces. The combination of X-ray photoelectron and near-edge X-ray absorption spectroscopy allowed us to obtain a complete understanding of complex interfacial processes, starting from adsorption of biomolecules onto the metallic surface and progressing towards a specific surface functionality for interactions with other biologically related adsorbates. Au(110) surfaces were functionalised by deposition of uracil and 2-thiouracil molecules under vacuum conditions, and then tested for their selectivity by immobilisation of different DNA moieties deposited from aqueous solutions.

Functionalization of nanostructured cerium oxide films with histidine.

The surfaces of polycrystalline cerium oxide films were modified by histidine adsorption under vacuum and characterized by the synchrotron based techniques of core and valence level photoemission, resonant photoemission and near edge X-ray absorption spectroscopy, as well as atomic force microscopy. Histidine is strongly bound to the oxide surface in the anionic form through the deprotonated carboxylate group, and forms a disordered molecular adlayer. The imidazole ring and the amino side group do not form bonds with the substrate but are involved in the intermolecular hydrogen bonding which stabilizes the molecular adlayer.