Enhanced Immobilization of Enzymes on Plasma Micro-Nanotextured Surfaces and Microfluidics: Application to HRP.

The enhanced and direct immobilization of the enzyme horseradish peroxidase on poly(methyl methacrylate) (PMMA) microchannel surfaces to create a miniaturized enzymatic reactor for the biocatalytic oxidation of phenols is demonstrated. Enzyme immobilization occurs by physical adsorption after oxygen plasma treatment, which micro-nanotextures the PMMA surfaces. A five-fold enhancement in immobilized enzyme activity was observed, attributed to the increased surface area and, therefore, to a higher quantity of immobilized enzymes compared to an untreated PMMA surface.

A Diagnostic Chip for the Colorimetric Detection of in Less than 3 h at the Point of Need.

has been pinpointed by the World Health Organization as the highest health burden of all waterborne pathogens in the European Union and is responsible for many disease outbreaks around the globe. Today, standard analysis methods (based on bacteria culturing onto agar plates) need several days (~12) in specialized analytical laboratories to yield results, not allowing for timely actions to prevent outbreaks. Over the last decades, great efforts have been made to develop more efficient waterborne pathogen diagnostics and faster analysis methods, requiring further advancement of microfluidics and sensors for simple, rapid, accurate, inexpensive, real-time, and on-site methods.

Micro-nano-bio acoustic system for the detection of foodborne pathogens in real samples.

The fast and efficient detection of foodborne pathogens is a societal priority, given the large number of food-poisoning outbreaks, and a scientific and technological challenge, given the need to detect as little as 1 viable cell in 25 gr of food. Here, we present the first approach that achieves the above goal, thanks to the use of a micro/nano-technology and the detection capability of acoustic wave sensors. Starting from 1 Salmonella cell in 25 ml of milk, we employ immuno-magnetic beads to capture cells after only 3 h of pre-enrichment and subsequently demonstrate efficient DNA amplification using the Loop Mediated Isothermal Amplification method (LAMP) and acoustic detection in an integrated platform, within an additional ½ h.

3D Plasma Nanotextured Polymeric Surfaces for Protein or Antibody Arrays, and Biomolecule and Cell Patterning.

Plasma micro-nanotexturing is a generic technology for topographical and chemical modification of surfaces and their implementation in microfluidics and microarrays. Nanotextured surfaces with desirable chemical functionality (and wetting behavior) have shown excellent biomolecule immobilization and cell adhesion. Specifically, nanotextured hydrophilic areas show (a) strong binding of biomolecules and (b) strong adhesion of cells, while nanotextured superhydrophobic areas show null adsorption of (a) proteins and (b) cells.

Three-dimensional (3D) plasma micro-nanotextured slides for high performance biomolecule microarrays: Comparison with epoxy-silane coated glass slides.

Glass slides coated with a poly(methyl methacrylate) layer and plasma micro-nanotextured to acquire 3D topography (referred as 3D micro-nanotextured slides) were evaluated as substrates for biomolecule microarrays. Their performance is compared with that of epoxy-coated glass slides. We found that the proposed three-dimensional (3D) slides offered significant improvements in terms of spot intensity, homogeneity, and reproducibility.

Plasma micro-nanotextured polymeric micromixer for DNA purification with high efficiency and dynamic range.

We present a polymeric microfluidic chip capable of purifying DNA through solid phase extraction. It is designed to be used as a module of an integrated Lab-on-chip platform for pathogen detection, but it can also be used as a stand-alone device. The microfluidic channels are oxygen plasma micro-nanotextured, i.

Plasma nanotextured polymeric lab-on-a-chip for highly efficient bacteria capture and lysis.

We describe the design, fabrication, and successful demonstration of a sample preparation module comprising bacteria cell capture and thermal lysis on-chip with potential applications in food sample pathogen analysis. Plasma nanotexturing of the polymeric substrate allows increase of the surface area of the chip and the antibody binding capacity. Three different anti-Salmonella antibodies were directly and covalently linked to plasma treated chips without any additional linker chemistry or other treatment.

Direct Covalent Biomolecule Immobilization on Plasma-Nanotextured Chemically Stable Substrates.

A new method for direct covalent immobilization of protein molecules (including antibodies) on organic polymers with plasma-induced random micronanoscale topography and stable-in-time chemical functionality is presented. This is achieved using a short (1-5 min) plasma etching and simultaneous micronanotexturing process, followed by a fast thermal annealing step, which induces accelerated hydrophobic recovery while preserving important chemical functionality created by the plasma. Surface-bound biomolecules resist harsh washing with sodium dodecyl sulfate and other detergents even at elevated temperatures, losing less than 40% of the biomolecules bound even at the harshest washing conditions.

Plasma-assisted nanoscale protein patterning on Si substrates via colloidal lithography.

Selective immobilization of proteins in well-defined patterns on substrates has recently attracted considerable attention as an enabling technology for applications ranging from biosensors and BioMEMS to tissue engineering. In this work, a method is reported for low-cost, large scale and high throughput, selective immobilization of proteins on nanopatterned Si, based on colloidal lithography and plasma processing to define the areas (<300 nm) where proteins are selectively immobilized. A close-packed monolayer of PS microparticles is deposited on oxidized Si and, either after microparticle size reduction or alternatively after metal deposition through the PS close-packed monolayer, is used as etching mask to define SiO2 nanoislands (on Si).

Flame Aerosol Deposition of TiO Nanoparticle Films on Polymers and Polymeric Microfluidic Devices for On-Chip Phosphopeptide Enrichment.

Direct and fast (10s of seconds) deposition of flame-made, high surface-area aerosol films on polymers and polymeric microfluidic devices is demonstrated. Uniform TiO nanoparticle films were deposited on cooled Poly(methyl methacrylate) (PMMA) substrates by combustion of titanium(IV) isopropoxide (TTIP) - xylene solution sprays. Films were mechanically stabilized by in-situ annealing with a xylene spray flame.

High-capacity and high-intensity DNA microarray spots using oxygen-plasma nanotextured polystyrene slides.

Commercially available polystyrene (PS) slides were plasma nanotextured (nano-roughened) through treatment in oxygen plasma discharges to create substrates with increased surface area for microarray applications. Conditions of plasma treatment were determined for maximum and uniform oligonucleotide immobilization on these nanotextured PS slides. Oligonucleotides were immobilized onto the surface in the form of biotinylated oligonucleotide/streptavidin conjugates to take advantage of increased protein binding capacity of the substrate.

TiO2-ZrO2 affinity chromatography polymeric microchip for phosphopeptide enrichment and separation.

We fabricated a TiO(2)-ZrO(2) affinity chromatography micro-column on 2 mm PMMA plates, and demonstrated the enrichment and separation of (a) a standard mono- and tetra-phosphopeptide, and (b) phosphopeptides contained in a tryptic digest of β-Casein. The chromatography column consisted of 32 parallel microchannels with common input and output ports and was fabricated by lithography directly on the polymeric substrate followed by plasma etching (i.e.

Plasma nanotextured PMMA surfaces for protein arrays: increased protein binding and enhanced detection sensitivity.

Poly(methyl methacrylate) (PMMA) substrates were nanotextured through treatment in oxygen plasma to create substrates with increased surface area for protein microarray applications. Conditions of plasma treatment were found for maximum uniform protein adsorption on these nanotextured PMMA surfaces. Similar results were obtained using both a high-density plasma (HDP) and a low-density reactive ion etcher (RIE), suggesting independence from the plasma reactor type.

"Smart" polymeric microfluidics fabricated by plasma processing: controlled wetting, capillary filling and hydrophobic valving.

We demonstrate a mass-production-amenable technology for fabrication, surface modification and multifunction integration in polymeric microfluidic devices, namely direct lithography on the polymeric substrate followed by polymer plasma etching, and selective plasma deposition. We apply the plasma processing technology to fabricate polymeric microfluidics in poly(methyl methacrylate) (PMMA) and poly(ether ether ketone) (PEEK). First, deep anisotropic O(2) plasma etching is utilized to pattern the polymer via an in situ, highly etch-resistant, thin, Si-containing photoresist, or via a thick organic photoresist.

Mechanisms of oxygen plasma nanotexturing of organic polymer surfaces: from stable super hydrophilic to super hydrophobic surfaces.

Plasma processing is used to fabricate super hydrophilic or super hydrophobic polymeric surfaces by means of O2 plasma etching of two organic polymers, namely, poly(methyl methacrylate) (PMMA) and poly(ether ether ketone) (PEEK); a C4F8 plasma deposition follows O2 plasma etching, if surface hydrophobization is desired. We demonstrate high aspect ratio pillars with height ranging from 16 nm to several micrometers depending on the processing time, and contact angle (CA) close to 0 degrees after O2-plasma treatment or CA of 153 degrees (with CA hysteresis lower than 5 degrees) after fluorocarbon deposition. Super hydrophobic surfaces are robust and stable in time; in addition, aging of super hydrophilic surfaces is significantly retarded because of the beneficial effect of the nanotextured topography.