Life time enhanced Fenton-like catalyst by dispersing iron oxides in activated carbon: Preparation and reactivation through carbothermal reaction.

Heterogeneous Fenton-like catalyst prepared by dispersing iron oxides in activated carbon (FeOx@AC) has frequently been assembled for advanced oxidation processes (AOPs). An intriguing but barely emphasized property of FeOx@AC is that it can be easily reactivated through a simple carbothermal reaction. Importantly, by this manner the life time of FeOx@AC could be effectively enhanced.

The effect of crystal phase of manganese oxide on the capacitive deionization of simple electrolytes.

MnO is a common material for the fabrication and design of capacitive deionization (CDI) devices but there is little information on the role of MnO crystal phase on CDI performance. A series of MnO (α, β, γ, and δ phase) were synthesized and fabricated as cathodes for studying the CDI performance as affected by pH in simple batch mode experiments. Our results revealed that the deionization efficiency decreased with increased negative surface charge as a result of the deprotonated surface.

Removal of polycyclic aromatic hydrocarbon (PAH)-contaminated sediments by persulfate oxidation and determination of degradation product cytotoxicity based on HepG2 and ZF4 cell lines.

This study evaluated the use of magnetite (FeO), carbon black (CB), and FeO-CB composites activated by persulfate (PS) at circumneutral pH to oxidize polycyclic aromatic hydrocarbons (PAHs) in marine sediments. In addition, the in vitro cytotoxic activity and apoptotic response of the obtained degradation products were investigated. Chemical analyses showed that the total PAH concentration was 26,263 ng/g for sediment samples from an industrial port area.

Effect of Surface Ionization of Doped MnO on Capacitive Deionization Efficiency.

Associating MnO with carbonaceous supports profoundly enhances capacitive deionization (CDI) efficiency. A fundamental question of how the surface chemistry of MnO itself influences CDI efficiency is not yet fully understood. In this study, the effect of surface ionization on the CDI efficiencies of Fe-, Co-, and Ni-doped α-MnO (<0.

Enhanced Metal Ion Rejection by a Low-Pressure Microfiltration System Using Cellulose Filter Papers Modified with Citric Acid.

Energy consumption is always a major issue hindering the universal application of membrane-based filtration system. We herein demonstrated a low-energy-consumption microfiltration system that can be operated under ambient pressure while a great metal ion rejection rate (>95%) accompanied by a high permeate flux (100 L/mh) was concurrently reached. This achievement was closely correlated to the enhanced metal ion adsorption by grafted carboxyl groups at the cellulose filter paper through esterification.

Laser-pattern induced contact guidance in biodegradable microfluidic channels for vasculature regeneration.

The direct cell control by surface topographic patterns in the micrometer and nanometer range has been proven to be important for the maintenance of tissue structures. This study presents the application of direct laser writing to fabricate micro-gratings on the biodegradable material 1,3-diamino-2-hydroxypropane-co-polyol sebacate (APS). The 193 nm excimer laser is applied to form microgrooves with widths of 2 to 10 μm and depths of 400 to 2884 nm.

Direct Micromachining of Microfluidic Channels on Biodegradable Materials Using Laser Ablation.

Laser patterning on polymeric materials is considered a green and rapid manufacturing process with low material selection barrier and high adjustability. Unlike microelectromechanical systems (MEMS), it is a highly flexible processing method, especially useful for prototyping. This study focuses on the development of polymer surface modification method using a 193 nm excimer laser system for the design and fabrication of a microfluidic system similar to that of natural vasculatures.

Element distribution over the surface of fish scales and its connection to the geochemical environment of habitats: a potential biogeochemical tag.

The elemental content of fish scales is known to be a reliable biogeochemical tag for tracing the origin of fishes. In this study, this correlation is further confirmed to exist on the surface of fish scales using a novel environmental analytical method, laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), which bypasses several complicated sample preparation procedures such as acid digestion and pre-concentration. The results suggest that the elemental ratios of Sr/Ca, Ba/Ca, and Mn/Ca on the surface of fish scales are strongly correlated with the geochemical environment of their original habitat.

Effect of interactions between Co(2+) and surface goethite layer on the performance of α-FeOOH coated hollow fiber ceramic ultrafiltration membranes.

The consideration of water energy nexus inspires the environmental engineering community to pursue a more sustainable strategy in the wastewater treatment. One potential response would be to enhance the performance of the low-pressure driven filtration system. To reach this objective, it is essential to have a better understanding regarding the surface interaction between the target substance and the surface of membrane.

CO₂ uptake performance and life cycle assessment of CaO-based sorbents prepared from waste oyster shells blended with PMMA nanosphere scaffolds.

In this paper, we demonstrate a means of simultaneously solving two serious environmental issues by reutilization of calcinated mixture of pulverized waste oyster shells blending with poly(methyl methacrylate) (PMMA) nanospheres to prepare CaO-based sorbents for CO2 capture. After 10 cycles of isothermal carbonation/calcination at 750°C, the greatest CO2 uptake (0.19 g CO2/g sorbent) was that for the sorbent featuring 70 wt% of PMMA, which was almost three times higher than that (0.

Intercomparison of diffusion coefficient derived from the through-diffusion experiment using different numerical methods.

Diffusion is a dominant mechanism regulating the transport of released nuclides. The through-diffusion method is typically applied to determine the diffusion coefficients (D). Depending on the design of the experiment, the concentrations in the source term [i.

Influence of sodium halides (NaF, NaCl, NaBr, NaI) on the photocatalytic performance of hydrothermally synthesized hematite photoanodes.

It has been suggested that a high concentration of Fe(3+) in solution, a low pH, and noncomplexing ions of high ionic strength are all essential for developing a high-quality hematite array. Our curiosity was piqued regarding the role of the electrolyte ions in the hydrothermal synthesis of hematite photoanodes. In this study, we prepared hematite photoanodes hydrothermally from precursor solutions of 0.

Spatial distributions of inorganic elements in honeybees (Apis mellifera L.) and possible relationships to dietary habits and surrounding environmental pollutants.

In this study, the laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was adopted to determine the distribution of inorganic elements, including Ca, Cu, Fe, Mg, Mn, S, P, Pb, and Zn, in honeybees (Apis melifera L.). Two features are particularly noteworthy.

The in vivo biodistribution and fate of CdSe quantum dots in the murine model: a laser ablation inductively coupled plasma mass spectrometry study.

Understanding the cytotoxicity of quantum dots strongly relies upon the development of new analytical techniques to gather information about various aspects of the system. In this study, we demonstrate the in vivo biodistribution and fate of CdSe quantum dots in the murine model by means of laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). By comparing the hot zones of each element acquired from LA-ICP-MS with those in fluorescence images, together with hematoxylin and eosin-stained images, we are able to perceive the fate and in vivo interactions between quantum dots and rat tissues.

The development of a through-diffusion model with a parent-daughter decay chain.

A valid performance assessment of radioactive waste repositories strongly depends on the reliability of nuclide transport parameters, including distribution and diffusion coefficients. To reduce the waste produced and time spent conducting diffusion experiments, a robust model is required to accurately interpret the experiment results. Therefore, we developed a through-diffusion model with parent-daughter nuclide decay chain.

Dense layers of vertically oriented WO3 crystals as anodes for photoelectrochemical water oxidation.

Films of crystalline WO(3) nanosheets oriented perpendicular to tungsten substrates were grown by a surfactant-free hydrothermal method, followed by sintering. The films exhibit photoelectrochemical oxygen evolution at low overpotential.

Cs sorption to potential host rock of low-level radioactive waste repository in Taiwan: experiments and numerical fitting study.

A reliable performance assessment of radioactive waste repository depends on better knowledge of interactions between nuclides and geological substances. Numerical fitting of acquired experimental results by the surface complexation model enables us to interpret sorption behavior at molecular scale and thus to build a solid basis for simulation study. A lack of consensus on a standard set of assessment criteria (such as determination of sorption site concentration, reaction formula) during numerical fitting, on the other hand, makes lower case comparison between various studies difficult.

Desorption of cesium from granite under various aqueous conditions.

In this work the desorption of cesium ions from crushed granite in synthetic groundwater (GW) and seawater (SW) was investigated. Results were compared with those obtained in deionized water (DW) and in two kinds of extraction solutions, namely: MgCl(2) and NaOAc (sodium acetate). In general, the desorption rate of Cs from crushed granite increased proportionally with initial Cs loadings.

Effect of alkyl properties and head groups of cationic surfactants on retention of cesium by organoclays.

Cationic surfactants modified clays exhibit high sorptive capability toward anionic radionuclides but retention of cationic radionuclides was concurrently reduced. In this study, organoclays were synthesized by intercalating a variety of primary/quaternary alkylammonium species (NH(2)R/(CH(3))(3)N(+)RBr(-), where R = benzyl, dodecyl, and octadecyl) into bentonite MX-80. The effect of surfactant's properties on enhancing or limiting cationic sorption capability was investigated by performing Cs sorption experiments.

Performance of phosphoric acid activated montmorillonite as buffer materials for radioactive waste repository.

In this study, the performance of phosphoric acid activated montmorillonite (PAmmt) was evaluated by cesium ions adsorption experiments. The PAmmt samples were obtained by activating with 1, 3 and 5 mol L(-1) of phosphoric acid, respectively under reflux for 3, 12, and 24h. Experimental results demonstrated that the treatment of raw K-10 montmorillonite with phosphoric acid increased the materials' affinity for Cs uptake and no significant amount of suspension solids were produced.

Experimental and numerical investigations of effect of column length on retardation factor determination: a case study of cesium transport in crushed granite.

This study investigated breakthrough curves (BTCs) from a series of column experiments, including different column lengths and flow rates, of a conservative tracer, tritium oxide (HTO), and a radionuclide, cesium, in crushed granite using a reactive transport model. Results of the short column, with length of 2cm, showed an underestimation of the retardation factor and the corresponding HTO BTCs cannot be successfully modeled even with overestimated fluid dispersivity. Column supporting elements, including filters and rings, on both ends of packed granite were shown to be able to induce additional dispersive mixing, thus significantly affecting BTCs of short columns while those of the long column, with length of 8cm, were less affected.

Cesium adsorption and distribution onto crushed granite under different physicochemical conditions.

The adsorption of cesium onto crushed granite was investigated under different physicochemical conditions including contact time, Cs loading, ionic strength and temperature. In addition, the distribution of adsorbed Cs was examined by X-ray diffraction (XRD) and EDS mapping techniques. The results showed that Cs adsorption to crushed granite behaved as a first-order reaction with nice regression coefficients (R(2) > or = 0.

Bridging the gap between batch and column experiments: A case study of Cs adsorption on granite.

Both batch and column methods are conventionally utilized to determine some critical parameters for assessing the transport of contaminants of concern. The validity of using these parameters is somewhat confusing, however, since outputs such as distribution coefficient (Kd) from these two approaches are often discrepant. To bridge this gap, all possible factors that might contribute to this discrepancy were thoroughly investigated in this report by a case study of Cs sorption to crushed granite under various conditions.

Removal of cesium ions from aqueous solution by adsorption onto local Taiwan laterite.

Utilization of local Taiwan laterite (LTL) to remove aqueous cesium was investigated in this work under the conditions of various contact time, cesium (Cs) loading and temperature. Experimental results show that adsorption is instantaneous. Freundlich and Langmuir simulation results demonstrate that local Taiwan laterite has high affinity and sorption capacity for Cs at low temperatures, which may be attributed to enhanced desorption as temperature increased.