Collagen Complexity Spatially Defines Microregions of Total Tissue Pressure in Pancreatic Cancer.

The poor efficacy of systemic cancer therapeutics in pancreatic ductal adenocarcinoma (PDAC) is partly attributed to deposition of collagen and hyaluronan, leading to interstitial hypertension collapsing blood and lymphatic vessels, limiting drug delivery. The intrinsic micro-regional interactions between hyaluronic acid (HA), collagen and the spatial origins of mechanical stresses that close off blood vessels was investigated here. Multiple localized pressure measurements were analyzed with spatially-matched histochemical images of HA, collagen and vessel perfusion.

Preliminary Assessment of a Hysteroscopic Fallopian Tube Heat and Biomaterial Technology for Permanent Female Sterilization.

Recent failures in hysteroscopic female sterilization procedures have brought into question the implantation of non-resorbable metal devices into the fallopian tubes due to long-term risks such as migration, fragmentation, and tubal perforation. The goal of this study is to assess whether a porous, biodegradable implant can be deposited into the fallopian tube lumen with or without a local mild heat treatment to generate a safe and permanent fallopian tube occlusion/sterilization event. The technologies investigated included freeze-cast collagen-based scaffolds and magnetic nanoparticle (MNP) based scaffolds.

Comparison of a single optimized coil and a Helmholtz pair for magnetic nanoparticle hyperthermia.

Magnetic nanoparticles in a tumor can induce therapeutic heating when energized by an alternating magnetic field from a current-carrying coil outside the body. We analyzed a single-turn, air-core coil carrying a filamentary current to quantify the power absorbed by: a) magnetic nanoparticles at depth in tissue and b) superficial tissue in response to induced eddy currents; we defined this quotient as power ratio (PR). Given some limit on the eddy current heating tolerated by an alert patient, maximizing the PR maximizes the power absorbed in the tumor; all else being equal, this increases the thermal dose delivered to the tumor.

Comparison of magnetic nanoparticle and microwave hyperthermia cancer treatment methodology and treatment effect in a rodent breast cancer model.

Purpose: The purpose of this study was to compare the efficacy of iron oxide/magnetic nanoparticle hyperthermia (mNPH) and 915 MHz microwave hyperthermia at the same thermal dose in a mouse mammary adenocarcinoma model.

Materials And Methods: A thermal dose equivalent to 60 min at 43 °C (CEM60) was delivered to a syngeneic mouse mammary adenocarcinoma flank tumour (MTGB) via mNPH or locally delivered 915 MHz microwaves. mNPH was generated with ferromagnetic, hydroxyethyl starch-coated magnetic nanoparticles.

Targeting of systemically-delivered magnetic nanoparticle hyperthermia using a noninvasive, static, external magnetic field.

One of the greatest challenges of nanoparticle cancer therapy is the delivery of adequate numbers of nanoparticles to the tumor site. Iron oxide nanoparticles (IONPs) have many favorable qualities, including their nontoxic composition, the wide range of diameters in which they can be produced, the cell-specific cytotoxic heating that results from their absorption of energy from a nontoxic, external alternating magnetic field (AMF), and the wide variety of functional coatings that can be applied. Although IONPs can be delivered via an intra-tumoral injection to some tumors, the resulting tumor IONP distribution is generally inadequate; additionally, local tumor injections do not allow for the treatment of systemic or multifocal disease.

Measurement of the anisotropic thermal conductivity of the porcine cornea.

Accurate thermal models for the cornea of the eye support the development of thermal techniques for reshaping the cornea and other scientific purposes. Heat transfer in the cornea must be quantified accurately so that a thermal treatment does not destroy the endothelial layer, which cannot regenerate, and yet is responsible for maintaining corneal transparency. We developed a custom apparatus to measure the thermal conductivity of ex vivo porcine corneas perpendicular to the surface and applied a commercial apparatus to measure thermal conductivity parallel to the surface.

Comparison of iron oxide nanoparticle and microwave hyperthermia alone or combined with cisplatinum in murine breast tumors.

Unlabelled: Surgery, radiation and chemotherapy are currently the most commonly used cancer therapies. Hyperthermia has been shown to work effectively with radiation and chemotherapy cancer treatments. The major obstacle faced by previous hyperthermia techniques has been the inability to deliver heat to the tumor in a precise manner.

Postnatal development of corneal curvature and thickness in the cat.

Objective: To evaluate the postnatal development of central corneal curvature and thickness in the domestic cat. Animals studied Six Domestic Short-haired (DSH) kittens starting at 9 weeks of age and 6 adult cats.

Procedures: Kittens were evaluated biweekly to monthly for a 12-month period, starting at age 9 weeks.

Microwave thermal keratoplasty for myopia: keratoscopic evaluation in porcine eyes.

Purpose: Microwave thermal keratoplasty applies microwave energy to elevate the temperature of the paracentral stroma of the cornea to its thermal shrinkage temperature of about 60 degrees C. A suitable pattern of shrinkage in the paracentral cornea can flatten the central cornea. A surface cooling system preserves the epithelium during the procedure.

FDTD electromagnetic and thermal analysis of interstitial hyperthermic applicators. Finite-difference time-domain.

In this paper, the electromagnetic and thermal behavior of interstitial applicators was analyzed by using the Finite-Difference Time-Domain method. Two configurations were considered: a simple insulated dipole antenna radiating in a layered tissue, and an air cooled applicator radiating in a tissue-equivalent phantom. The proposed approach allows a detailed modeling of the complete structure of the applicator.

Clinical potential for the use of neuroprotective agents. A brief overview.

"Stroke treatment seems to be entering a golden age ...

Theoretical and experimental analysis of air cooling for intracavitary microwave hyperthermia applicators.

An intracavitary microwave antenna array system has been developed and tested for the hyperthermia treatment of prostate cancer at Thayer School of Engineering and Dartmouth-Hitchcock Medical Center. The antenna array consists of a choked dipole antenna inserted into the urethra and a choked dipole antenna eccentrically embedded in a Teflon obturator inserted into the rectum. To prevent unnecessary heating of the healthy tissue that surrounds each applicator, an air cooling system has been incorporated into the rectal applicator.

Effect of phase modulation on the temperature distribution of a microwave hyperthermia antenna array in vivo.

Perfused, canine skeletal muscle and the brain tumour of a cancer patient were heated with an array of four parallel, interstitial antennas placed on the corners of a 2-cm square and driven at 915 MHz. The temperature distributions along the axial and diagonal catheters were measured with equal-phase driving of the antennas and with several time-varying schemes of driving phase differences among the antennas. When equal-phase driving was replaced by a rotating scheme of 90 degrees driving phase differences, the tissue area in the junction plane heated above a normalized index temperature of 0.

Brain hyperthermia: I. Interstitial microwave antenna array techniques--the Dartmouth experience.

Purpose: Microwave antennas of various designs were inserted into arrays of nylon catheters implanted in brain tumors with the goal of raising temperatures throughout the target volume to 43.0 degrees C.

Methods And Materials: All antennas were flexible, and included dipole, choke dipole, modified dipole, and helical designs driven at 915 or 2450 MHz.

A theoretical model for input impedance of interstitial microwave antennas with choke.

Purpose: Two important characteristics for interstitial microwave antennas used in clinical hyperthermia are: (1) a good impedance match to minimize reflected power; and (2) a good power deposition pattern which is independent of insertion depth. A major problem of the miniature coaxial dipole antennas used for interstitial hyperthermia is the fact that the impedance and power deposition patterns of these antennas change with insertion depth. One possible solution is the addition of a coaxial choke.

Pattern of response to interstitial hyperthermia and brachytherapy for malignant intracranial tumour: a CT analysis.

Interstitial microwave hyperthermia in combination with iridium-192 brachytherapy has been administered to 23 cases of malignant brain tumours in a phase one clinical trial to assess the feasibility and safety of this treatment. In order to quantify the acute and long-term response of tumour and surrounding brain to this treatment, a morphometric computed tomography scan analysis was performed in 18 evaluable patients. Volumes defined by the outer margin of the contrast-enhancing rim, by the hypodense necrotic region within the enhancing rim and by the surrounding hypodensity region were calculated from computer measurements.

A coaxial microwave applicator for transurethral hyperthermia of the prostate.

Benign prostatic hyperplasia (BPH) is a common disease of elderly men. The current definitive treatment for urinary obstruction caused by this disease is surgery (transurethral resection of the prostate, or TURP). Recent evidence suggests that hyperthermia may be a useful nonsurgical alternative for treatment of symptomatic BPH.

Air cooling for an interstitial microwave hyperthermia antenna: theory and experiment.

Microwave antennas are inserted through brachytherapy catheters implanted in a tumor to deliver interstitial hyperthermia cancer therapy. Theoretical calculations show that a cooling rate on the order of 0.1 W/cm length of catheter will significantly improve the radial uniformity of the temperature distribution of single antennas or arrays.

The effect of air cooling on the radial temperature distribution of a single microwave hyperthermia antenna in vivo.

Canine skeletal muscle was heated with a single microwave antenna within a brachytherapy catheter driven at 2000 MHz. The radial, steady-state temperature distribution was measured with and without air cooling of the antenna, as produced by room temperature air flowing in the catheter at 7.5 l/min.

Combined microwave heating and surface cooling of the cornea.

We investigated a nonsurgical means of reshaping the cornea to correct hyperopia, keratoconus, or myopia. The object was to heat the central stroma of the cornea to the shrinkage temperature of collagen, 55-58 degrees C. The heating device was an open-ended, coaxial, near-field applicator driven at 2450 MHz; it incorporates cooling of the cornea surface by flow of saline.

The effect of insertion depth on the theoretical SAR patterns of 915 MHz dipole antenna arrays for hyperthermia.

Interstitial microwave antenna array hyperthermia (IMAAH) is presently used clinically in the treatment of cancer. This paper presents the theoretical specific absorption rate (SAR) patterns of 915 MHz microwave antenna arrays for varying insertion depths. The antennas were oriented in a 2 x 2 cm square array.

Interstitial hyperthermia in combination with brachytherapy.

Flexible coaxial cables were modified to serve as microwave antennas operating at a frequency of 915 MHz. These antennas were inserted into nylon afterloading tubes that had been implanted in tumors using conventional interstitial implantation techniques for iridium-192 seed brachytherapy. The tumor volume was heated to 42-45 degrees C within 15 minutes and heating was continued for a total of 1 hour per treatment.