Multiscale static and dynamic mechanical study of the and seashells.

Marine shells are designed by nature to ensure mechanical protection from predators and shelter for molluscs living inside them. A large amount of work has been done to study the multiscale mechanical properties of their complex microstructure and to draw inspiration for the design of impact-resistant biomimetic materials. Less is known regarding the dynamic behaviour related to their structure at multiple scales.

Probing the current-phase relation in Josephson point-contact junctions between [Formula: see text]In[Formula: see text] and [Formula: see text]K[Formula: see text](FeAs)[Formula: see text] superconductors.

The Josephson effect in point contacts between an "ordinary" superconductor [Formula: see text]In[Formula: see text] ([Formula: see text]) and single crystals of the Fe-based superconductor Ba[Formula: see text]K[Formula: see text](FeAs)[Formula: see text] ([Formula: see text]), was investigated. In order to shed light on the order parameter symmetry of Ba[Formula: see text]K[Formula: see text](FeAs)[Formula: see text], the dependence of the Josephson supercurrent [Formula: see text] on the temperature and on [Formula: see text] with [Formula: see text] was studied. The dependencies of the critical current on temperature [Formula: see text] and of the amplitudes of the first current steps of the current-voltage characteristic [Formula: see text] [Formula: see text] on the power of microwave radiation with frequency [Formula: see text] were measured.

Reaching silicon-based NEMS performances with 3D printed nanomechanical resonators.

The extreme miniaturization in NEMS resonators offers the possibility to reach an unprecedented resolution in high-performance mass sensing. These very low limits of detection are related to the combination of two factors: a small resonator mass and a high quality factor. The main drawback of NEMS is represented by the highly complex, multi-steps, and expensive fabrication processes.

Bispyrene Functionalization Drives Self-Assembly of Graphite Nanoplates into Highly Efficient Heat Spreader Foils.

Thermally conductive nanopapers fabricated from graphene and related materials are currently showing great potential in thermal management applications. However, thermal contacts between conductive plates represent the bottleneck for thermal conductivity of nanopapers prepared in the absence of a high temperature step for graphitization. In this work, the problem of ineffective thermal contacts is addressed by the use of bifunctional polyaromatic molecules designed to drive self-assembly of graphite nanoplates (GnP) and establish thermal bridges between them.

Directed Self-Assembly of Polystyrene Nanospheres by Direct Laser-Writing Lithography.

In this work, we performed a systematic study on the effect of the geometry of pre-patterned templates and spin-coating conditions on the self-assembling process of colloidal nanospheres. To achieve this goal, large-scale templates, with different size and shape, were generated by direct laser-writer lithography over square millimetre areas. When deposited over patterned templates, the ordering dynamics of the self-assembled nanospheres exhibits an inverse trend with respect to that observed for the maximisation of the correlation length ξ on a flat surface.

Chemical-Vapor-Deposited Graphene as a Thermally Conducting Coating.

We performed scanning thermal microscopy measurements on single layers of chemical-vapor-deposited (CVD) graphene supported by different substrates, namely, SiO, AlO, and PET using a double-scan technique to remove the contribution to the heat flux through the air and the cantilever. Then, by adopting a simple lumped-elements model, we developed a new method that allows determining, through a multistep numerical analysis, the equivalent thermal properties of thermally conductive coatings of nanometric thickness. In this specific case we found that our CVD graphene is "thermally equivalent", for heat injection perpendicular to the graphene planes, to a coating material of conductivity = 2.

Cytocompatible and Anti-bacterial Adhesion Nanotextured Titanium Oxide Layer on Titanium Surfaces for Dental and Orthopedic Implants.

It is widely recognized that surface nanotextures applied on a biomaterial can affect wettability, protein absorption and cellular and/or bacterial adhesion; accordingly, they are nowadays of great interest to promote fast osseointegration and to maintain physiological healing around biomedical implants. In order to be suitable for clinical applications, surface nanotextures must be not only safe and effective, but also, they should be produced through industrial processes scalable to real devices with sustainable processes and costs: this is often a barrier to the market entry. Based on these premises, a chemical surface treatment designed for titanium and its alloys able to produce an oxide layer with a peculiar sponge like nanotexture coupled with high density of hydroxyl group is here presented.

Facile and Low Environmental Impact Approach to Prepare Thermally Conductive Nanocomposites Based on Polylactide and Graphite Nanoplatelets.

In this work, the preparation of nanocomposites based on poly(l-lactide) PLLA and graphite nanoplatelets (GNP) was assessed by applying, for the first time, the reactive extrusion (REX) polymerization approach, which is considered a low environmental impact method to prepare polymer systems and which allows an easy scalability. In particular, synthesized molecules, constituted by a pyrene end group and a poly(d-lactide) (PDLA) chain (Pyr-d), capable of interacting with the surface of GNP layers as well as forming stereoblocks during the ring-opening polymerization (ROP) of l-lactide, were used. The nanocomposites were synthesized by adding to l-lactide the GNP/initiator system, prepared by dispersing the graphite in the acetone/Pyr-d solution, which was dried after the sonication process.

Thermally and Electrically Conductive Nanopapers from Reduced Graphene Oxide: Effect of Nanoflakes Thermal Annealing on the Film Structure and Properties.

In this study, we report a novel strategy to prepare graphene nanopapers from direct vacuum filtration. Instead of the conventional method, i.e.

Design and construction of a point-contact spectroscopy rig with lateral scanning capability.

The design and realization of a cryogenic rig for point-contact spectroscopy measurements in the needle-anvil configuration is presented. Thanks to the use of two piezoelectric nano-positioners, the tip can move along the vertical (z) and horizontal (x) direction and thus the rig is suitable to probe different regions of a sample in situ. Moreover, it can also form double point-contacts on different facets of a single crystal for achieving, e.

Fermi-Surface Topological Phase Transition and Horizontal Order-Parameter Nodes in CaFe2As2 Under Pressure.

Iron-based compounds (IBS) display a surprising variety of superconducting properties that seems to arise from the strong sensitivity of these systems to tiny details of the lattice structure. In this respect, systems that become superconducting under pressure, like CaFe2As2, are of particular interest. Here we report on the first directional point-contact Andreev-reflection spectroscopy (PCARS) measurements on CaFe2As2 crystals under quasi-hydrostatic pressure, and on the interpretation of the results using a 3D model for Andreev reflection combined with ab-initio calculations of the Fermi surface (within the density functional theory) and of the order parameter symmetry (within a random-phase-approximation approach in a ten-orbital model).

Optimization and characterization of a homogeneous carboxylic surface functionalization for silicon-based biosensing.

A well-organized immobilization of bio-receptors is a crucial goal in biosensing, especially to achieve high reproducibility, sensitivity and specificity. These requirements are usually attained with a controlled chemical/biochemical functionalization that creates a stable layer on a sensor surface. In this work, a chemical modification protocol for silicon-based surfaces to be applied in biosensing devices is presented.

Temperature dependence of electric transport in few-layer graphene under large charge doping induced by electrochemical gating.

The temperature dependence of electric transport properties of single-layer and few-layer graphene at large charge doping is of great interest both for the study of the scattering processes dominating the conductivity at different temperatures and in view of the theoretically predicted possibility to reach the superconducting state in such extreme conditions. Here we present the results obtained in 3-, 4- and 5-layer graphene devices down to 3.5 K, where a large surface charge density up to about 6.

Strong-coupling d-wave superconductivity in PuCoGa₅ probed by point-contact spectroscopy.

Superconductivity is due to an attractive interaction between electrons that, below a critical temperature, drives them to form Cooper pairs and to condense into a ground state separated by an energy gap from the unpaired states. In the simplest cases, the pairing is mediated by lattice vibrations and the wavefunction of the pairs is isotropic. Less conventional pairing mechanisms can favour more exotic symmetries of the Cooper pairs.

Large conductance modulation of gold thin films by huge charge injection via electrochemical gating.

By using an electrochemical gating technique with a new combination of polymer and electrolyte, we were able to inject surface charge densities n(2D) as high as 3.5×10(15)  e/cm(2) in gold films and to observe large relative variations in the film resistance, ΔR/R', up to 10% at low temperature. ΔR/R' is a linear function of n(2D)-as expected within a free-electron model-if the film is thick enough (≥25  nm); otherwise, a tendency to saturation due to size effects is observed.

Multigap superconductivity and strong electron-boson coupling in Fe-based superconductors: a point-contact Andreev-reflection study of Ba(Fe(1-x)Co(x))2As2 single crystals.

Directional point-contact Andreev-reflection measurements in Ba(Fe(1-x)Co(x))2As2 single crystals (T(c) = 24.5 K) indicate the presence of two superconducting gaps with no line nodes on the Fermi surface. The point-contact Andreev-reflection spectra also feature additional structures related to the electron-boson interaction, from which the characteristic boson energy Ω(b)(T) is obtained, very similar to the spin-resonance energy observed in neutron scattering experiments.

Thermal and electronic properties of macroscopic multi-walled carbon nanotubes blocks.

Massive carpets of well packed, vertically aligned and very long multiwall carbon nanotubes were synthesized by an efficient thermal Chemical Vapour Deposition process. Electrical properties of the material were evaluated, both in terms of "global" characteristics (bulk resistivity) and in terms of "local" properties (Scanning Tunnel Spectroscopy measurements) for as-grown and annealed at different temperatures samples. The behaviour of bulk resistivity as a function of temperature was evaluated in the range 3-300 K, with a four-probe technique.

Evidence for gap anisotropy in CaC6 from directional point-contact spectroscopy.

We present the first results of directional point-contact spectroscopy in high-quality CaC6 samples both along the ab plane and in the c-axis direction. The superconducting order parameter Delta(0), obtained by fitting the Andreev-reflection (AR) conductance curves at temperatures down to 400 mK with the single-band 3D Blonder-Tinkham-Klapwijk model, presents two different distributions in the two directions of the main current injection, peaked at 1.35 and 1.

Effect of magnetic impurities in a two-band superconductor: a point-contact study of mn-substituted single crystals.

We present the first results of directional point-contact measurements in Mg1-xMnxB2 single crystals, with x up to 0.015 and bulk Tc down to 13.3 K.

The metabolism of 1,3-cyclohexadiene by liver microsomal mono-oxygenase.

1. 1,3-Cyclohexadiene exhibits type I binding spectra with microsomal cytochrome P-450 of either untreated, or phenobarbital- or 3-methylcholanthrene-treated mice. In all cases, two values of Ks can be measured, indicating a different affinity of 1,3-cyclohexadiene towards the cytochrome P-450 species.