Constructing Hydrophilic Polymer Membranes with Microporosity for Aqueous Redox Flow Batteries.

Ion selective membranes (ISMs) are key components of aqueous redox flow batteries (ARFBs), and their property in selective ion transport largely determines the energy storage efficiency of ARFBs. Traditional ISMs are based on microphase-separated structures and have been advanced for many years, but most of them show poor performance as membrane separators in ARFBs due to their conductivity-selectivity. In recent years, using confined micropores instead of dense hydrophilic regions as ion channels has been demonstrated to effectively break this tradeoff.

Side Chain Crosslinked Anion Exchange Membrane for Acid Concentration by Electrodialysis.

Electrodialysis (ED) technology for waste acid treatment has high economic efficiency and environmentally friendly advantages. The primary limitation of ED in the retrieval of low-concentration spent acids lies in the leakage of hydrogen ions through anion exchange membranes (AEMs) due to its extremely small size and high mobility. To address this issue, a series of AEMs named QPAB- ( = 3, 5, 7, 10) were designed for acid concentration in ED process by increasing the membrane densities through in situ crosslinking in this study.

Constructing new-generation ion exchange membranes under confinement regime.

Ion exchange membranes (IEMs) enable fast and selective ion transport and the partition of electrode reactions, playing an important role in the fields of precise ion separation, renewable energy storage and conversion, and clean energy production. Traditional IEMs form ion channels at the nanometer-scale via the assembly of flexible polymeric chains, which are trapped in the permeability/conductivity and selectivity trade-off dilemma due to a high swelling propensity. New-generation IEMs have shown great potential to break this intrinsic limitation by using microporous framework channels for ion transport under a confinement regime.

Adjusting Hirshfeld charge of TEMPO catholytes for stable all-organic aqueous redox flow batteries.

2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) derivatives are typical catholytes in aqueous organic redox flow batteries (AORFBs), but reported lifetime of them is limited. We find that the increase of Hirshfeld charge decreases the Gibbs free energy change (ΔG) values of side reactions of TEMPO, a near-linear relationship, and then exacerbates their degradation. Here we predict and synthesize a TEMPO derivative, namely TPP-TEMPO, by analyzing the Hirshfeld charge.

Flow field design and visualization for flow-through type aqueous organic redox flow batteries.

Aqueous organic redox flow batteries (AORFBs), which exploit the reversible redox reactions of water-soluble organic electrolytes to store electricity, have emerged as a promising electrochemical energy storage technology. Organic electrolytes possess fast electron-transfer rates that are two or three orders of magnitude faster than those of their inorganic or organometallic counterparts; therefore, their performance at the electrode is limited by mass transport. Direct adoption of conventional cell stacks with flow fields designed for inorganic electrolytes may compromise AORFB performance owing to severe cell polarization.

Tailoring high-performance bipolar membrane for durable pure water electrolysis.

Bipolar membrane electrolyzers present an attractive scenario for concurrently optimizing the pH environment required for paired electrode reactions. However, the practicalization of bipolar membranes for water electrolysis has been hindered by their sluggish water dissociation kinetics, poor mass transport, and insufficient interface durability. This study starts with numerical simulations and discloses the limiting factors of monopolar membrane layer engineering.

Sulfonated Microporous Polyxanthene Binder for High-Temperature Hydrogen Fuel Cells.

High-temperature proton exchange membrane fuel cells based on phosphoric acid-doped polybenzimidazole (PBI) materials face challenges of low power output and low Pt utilization due to the lack of suitable electrode binders. We have developed a sulfonated microporous polymer material (namely, SPX, i.e.

Bioadhesive-Inspired Ionomer for Membrane Electrode Assembly Interface Reinforcement in Fuel Cells.

Anion exchange membrane fuel cells promise a sustainable and ecofriendly energy conversion pathway yet suffer from insufficient performance and durability. Drawing inspiration from mussel foot adhesion proteins for the first time, we herein demonstrate catechol-modified ionomers that synergistically reinforce the membrane electrode assembly interface and triple-phase boundary inside catalyst layers. The resulting ionomers present exceptional alkaline stability with only slight ionic conductivity declines after treatment in 2 M NaOH aqueous solution at 80 °C for 2500 h.

Social accessibility in queering code/space: Blued-based visibility and social practices of local gay people in mainland China.

As a locative media, Blued articulates physical and digital space in the form of localization, giving a mediated visibility to its users who are not visible in physical space, thus making the city a queering code/space. This can transform social accessibility and the ways that gays come together and interact in local spaces. Taking mainland China, dominated by heteronomativity, as a field, this paper focuses on the visibility negotiation and social accessibility practices in Blued-based queering code/space.

Anion Exchange Membrane with Pendulous Piperidinium on Twisted All-Carbon Backbone for Fuel Cell.

As a central component for anion exchange membrane fuel cells (AEMFCs), the anion exchange membrane is now facing the challenge of further improving its conductivity and alkali stability. Herein, a twisted all-carbon backbone is designed by introducing stereo-contorted units with piperidinium groups dangled at the twisted sites. The rigid and twisted backbone improves the conduction of hydroxide and brings down the squeezing effect of the backbone on piperidine rings.

Constructing Microporous Ion Exchange Membranes via Simple Hypercrosslinking for pH-Neutral Aqueous Organic Redox Flow Batteries.

Ion exchange membranes (IEMs) play a critical role in aqueous organic redox flow batteries (AORFBs). Traditional IEMs that feature microphase-separated microstructures are well-developed and easily available but suffer from the conductivity/selectivity tradeoff. The emerging charged microporous polymer membranes show the potential to overcome this tradeoff, yet their commercialization is still hindered by tedious syntheses and demanding conditions.

Perfect confinement of crown ethers in MOF membrane for complete dehydration and fast transport of monovalent ions.

Fast transport of monovalent ions is imperative in selective monovalent ion separation based on membranes. Here, we report the in situ growth of crown ether@UiO-66 membranes at a mild condition, where dibenzo-18-crown-6 (DB18C6) or dibenzo-15-crown-5 is perfectly confined in the UiO-66 cavity. Crown ether@UiO-66 membranes exhibit enhanced monovalent ion transport rates and mono-/divalent ion selectivity, due to the combination of size sieving and interaction screening effects toward the complete monovalent ion dehydration.

Dual-Function Electrolyte Additive Design for Long Life Alkaline Zinc Flow Batteries.

Alkaline zinc-based flow batteries (AZFBs) have emerged as a promising electrochemical energy storage technology owing to Zn abundance, high safety, and low cost. However, zinc dendrite growth and the formation of dead zinc greatly impede the development of AZFBs. Herein, a dual-function electrolyte additive strategy is proposed to regulate zinc nucleation and mitigate the hydroxide corrosion of zinc depositions for stable AZFBs.

Ultramicroporous Tröger's Base Framework Membranes for pH-Neutral Aqueous Organic Redox Flow Batteries.

Processable polymers of intrinsic microporosity (PIMs) are emerging as promising candidates for next-generation ion exchange membranes (IEMs). However, especially with high ion exchange capacity (IEC), IEMs derived from PIMs suffer from severe swelling, thus, resulting in decreased selectivity. To solve this problem, we report ultramicroporous polymer framework membranes constructed with rigid Tröger's Base network chains, which are fabricated via an organic sol-gel process.

Unveiling the nature of Pt-induced anti-deactivation of Ru for alkaline hydrogen oxidation reaction.

While Ru owns superior catalytic activity toward hydrogen oxidation reaction and cost advantages, the catalyst deactivation under high anodic potential range severely limits its potential to replace the Pt benchmark catalyst. Unveiling the deactivation mechanism of Ru and correspondingly developing protection strategies remain a great challenge. Herein, we develop atomic Pt-functioned Ru nanoparticles with excellent anti-deactivation feature and meanwhile employ advanced operando characterization tools to probe the underlying roles of Pt in the anti-deactivation.

Advancing Ion Selective Membranes with Micropore Ion Channels in the Interaction Confinement Regime.

Ion exchange membranes allowing the passage of charge-carrying ions have established their critical role in water, environmental, and energy-relevant applications. The design strategies for high-performance ion exchange membranes have evolved beyond creating microphase-separated membrane morphologies, which include advanced ion exchange membranes to ion-selective membranes. The properties and functions of ion-selective membranes have been repeatedly updated by the emergence of materials with subnanometer-sized pores and the understanding of ion movement under confined micropore ion channels.

Improving the Efficiencies of Water Splitting and CO Electrolysis by Anodic O Bubble Management.

This study systematically explores the impact of the anodic flow field design on the transport of O bubble and subsequent energy efficiency in electrolysis devices. Two distinct configurations, namely a conventional serpentine flow panel and an interdigitated flow panel, are integrated at the anode side of the electrolyzer. The interdigitated flow field exhibits superior performance in both alkaline water splitting and CO reduction despite the experience of an increased pressure drop.

Dual-Channel-Ion Conductor Membrane for Low-Energy Lithium Extraction.

The development of energy-efficient and environmentally friendly lithium extraction techniques is essential to meet the growing global demand for lithium-ion batteries. In this work, a dual-channel ion conductor membrane was designed for a concentration-driven lithium-selective ion diffusion process. The membrane was based on a porous lithium-ion conductor, and its pores were modified with an anion-exchange polymer.

Alkaline Membranes toward Electrochemical Energy Devices: Recent Development and Future Perspectives.

Anion-exchange membranes (AEMs) that can selectively transport OH, namely, alkaline membranes, are becoming increasingly crucial in a variety of electrochemical energy devices. Understanding the membrane design approaches can help to break through the constraints of undesired performance and lab-scale production. In this Outlook, the research progress of alkaline membranes in terms of backbone structures, synthesis methods, and related applications is organized and discussed.

A Bifunctional Catalyst for Green Ammonia Synthesis from Ubiquitous Air and Water.

Ammonia (NH ) is essential for modern agriculture and industry, and, due to its high hydrogen density and no carbon emission, it is also expected to be the next-generation of "clean" energy carrier. Herein, directly from air and water, a plasma-electrocatalytic reaction system for NH production, which combines two steps of plasma-air-to-NO and electrochemical NO reduction reaction (eNO RR) with a bifunctional catalyst, is successfully established. Especially, the bifunctional catalyst of CuCo O /Ni can simultaneously promote plasma-air-to-NO and eNO RR processes.

Upscaled production of an ultramicroporous anion-exchange membrane enables long-term operation in electrochemical energy devices.

The lack of high-performance and substantial supply of anion-exchange membranes is a major obstacle to future deployment of relevant electrochemical energy devices. Here, we select two isomers (m-terphenyl and p-terphenyl) and balance their ratio to prepare anion-exchange membranes with well-connected and uniformly-distributed ultramicropores based on robust chemical structures. The anion-exchange membranes display high ion-conducting, excellent barrier properties, and stability exceeding 8000 h at 80 °C in alkali.