Growth mechanisms and anisotropic softness-dependent conductivity of orientation-controllable metal-organic framework nanofilms.

Conductive metal-organic frameworks (MOFs) manifest great potential in modern electrical devices due to their porous nature and the ability to conduct charges in a regular network. MOFs applied in electrical devices normally hybridize with other materials, especially a substrate. Therefore, the precise control of the interface between MOF and a substrate is particularly crucial.

Star-shape non-fullerene acceptor featuring an aza-triangulene core for organic solar cells.

We present the simple synthesis of a star-shape non-fullerene acceptor (NFA) for application in organic solar cells. This NFA possesses a D(A) structure in which the electron-donating core is an aza-triangulene unit and we report the first crystal structure for a star shape NFA based on this motive. We fully characterized this molecule's optoelectronic properties in solution and thin films, investigating its photovoltaic properties when blended with PTB7-Th as the electron donor component.

Integrated Soft Porosity and Electrical Properties of Conductive-on-Insulating Metal-Organic Framework Nanocrystals.

A one-stone, two-bird method to integrate the soft porosity and electrical properties of distinct metal-organic frameworks (MOFs) into a single material involves the design of conductive-on-insulating MOF (cMOF-on-iMOF) heterostructures that allow for direct electrical control. Herein, we report the synthesis of cMOF-on-iMOF heterostructures using a seeded layer-by-layer method, in which the sorptive iMOF core is combined with chemiresistive cMOF shells. The resulting cMOF-on-iMOF heterostructures exhibit enhanced selective sorption of CO compared to the pristine iMOF (298 K, 1 bar, S from 15.

Stability of silicon-tin alloyed nanocrystals with high tin concentration synthesized by femtosecond laser plasma in liquid media.

Nanocrystals have a great potential for future materials with tunable bandgap, due to their optical properties that are related with the material used, their sizes and their surface termination. Here, we concentrate on the silicon-tin alloy for photovoltaic applications due to their bandgap, lower than bulk Si, and also the possibility to activate direct band to band transition for high tin concentration. We synthesized silicon-tin alloy nanocrystals (SiSn-NCs) with diameter of about 2-3 nm by confined plasma technique employing a femtosecond laser irradiation on amorphous silicon-tin substrate submerged in liquid media.

Nonpolymer Organic Solar Cells: Microscopic Phonon Control to Suppress Nonradiative Voltage Loss via Charge-Separated State.

Recent remarkable developments on nonfullerene solar cells have reached a photoelectric conversion efficiency (PCE) of 18% by tuning the band energy levels in small molecular acceptors. In this regard, understanding the impact of small donor molecules on nonpolymer solar cells is essential. Here, we systematically investigated mechanisms of solar cell performance using diketopyrrolopyrrole (DPP)-tetrabenzoporphyrin (BP) conjugates of C4-DPP-HBP and C4-DPP-ZnBP, where C4 represents the butyl group substituted at the DPP unit as small p-type molecules, while an acceptor of [6,6]-phenyl-C-buthylic acid methyl ester is employed.

'Molecular Beam Epitaxy' on Organic Semiconductor Single Crystals: Characterization of Well-Defined Molecular Interfaces by Synchrotron Radiation X-ray Diffraction Techniques.

Epitaxial growth, often termed "epitaxy", is one of the most essential techniques underpinning semiconductor electronics, because crystallinities of the materials seriously dominate operation efficiencies of the electronic devices such as power gain/consumption, response speed, heat loss, and so on. In contrast to already well-established epitaxial growth methodologies for inorganic (covalent or ionic) semiconductors, studies on inter-molecular (van der Waals) epitaxy for organic semiconductors is still in the initial stage. In the present review paper, we briefly summarize recent works on the epitaxial inter-molecular junctions built on organic semiconductor single-crystal surfaces, particularly on single crystals of pentacene and rubrene.

Exploration of Alkyl Group Effects on the Molecular Packing of 5,15-Disubstituted Tetrabenzoporphyrins toward Efficient Charge-Carrier Transport.

The high design flexibility of organic semiconductors should lead to diverse and complex electronic functions. However, currently available high-performance organic semiconductors are limited in variety; most of p-type materials are based on thienoacenes or related one-dimensionally (1D) extended π-conjugated systems. In an effort to expand the diversity of organic semiconductors, we are working on the development of tetrabenzoporphyrin (BP) derivatives as active-layer components of organic electronic devices.

Quasi-Homoepitaxial Junction of Organic Semiconductors: A Structurally Seamless but Electronically Abrupt Interface between Rubrene and Bis(trifluoromethyl)dimethylrubrene.

Single-crystalline organic semiconductors exhibiting band transport have opened new possibilities for the utilization of efficient charge carrier conduction in organic electronic devices. The epitaxial growth of molecular materials is a promising route for the realization of well-crystallized organic semiconductor p-n junctions for optoelectronic applications enhanced by the improved charge carrier mobility. In this study, the formation of a high-quality crystalline interface upon "quasi-homoepitaxial" growth of bis(trifluoromethyl)dimethylrubrene (fmRub) on the single-crystal surface of rubrene was revealed by using out-of-plane and grazing-incidence X-ray diffraction techniques.

A comparative study of honeycomb-like 2D π-conjugated metal-organic framework chemiresistors: conductivity and channels.

Two-dimensional (2D) π-conjugated conductive metal-organic frameworks (MOFs, 2DπcMOF) with modulated channel sizes and a broad conductivity range have been reported in the last decade. In contrast, the corresponding comparative studies on their effects on chemiresistive sensing performances, which measure the resistive response toward external chemical stimuli, have not yet been reported. In this work, we sought to explore the structure-performance relationships of honeycomb-like 2D π-conjugated MOF chemiresistive gas sensors with channel sizes less than 2 nm (the mass transport issue) and broad conductivity in the range from ∼10 S cm to 1 S cm (the charge transport issue).

Insights into Microscopic Crystal Growth Dynamics of CHNHPbI under a Laser Deposition Process Revealed by X-ray Diffraction.

The process dynamics for the vacuum deposition of methylammonium lead iodide (MAPbI) perovskite was analyzed by X-ray diffraction using synchrotron radiation. MAPbI was fabricated by alternatingly supplying PbI and methylammonium iodide a laser deposition system installed at the synchrotron beamline BL46XU at SPring-8, and crystallization analysis was conducted. Microscopic insights into the crystallization were obtained, including observation of Laue oscillation during the PbI growth and octahedral unit (PbI) rotation during the transformation into perovskite.

Interface Structures and Electronic States of Epitaxial Tetraazanaphthacene on Single-Crystal Pentacene.

The structural and electronic properties of interfaces composed of donor and acceptor molecules play important roles in the development of organic opto-electronic devices. Epitaxial growth of organic semiconductor molecules offers a possibility to control the interfacial structures and to explore precise properties at the intermolecular contacts. 5,6,11,12-tetraazanaphthacene (TANC) is an acceptor molecule with a molecular structure similar to that of pentacene, a representative donor material, and thus, good compatibility with pentacene is expected.

Layer-by-Layer Growth Control of Metal-Organic Framework Thin Films Assembled on Polymer Films.

We demonstrate growth control of Cu-based metal-organic framework (MOF) (HKUST-1) thin films assembled by the layer-by-layer technique on polymer films. The crystallinity and crystal face of MOF thin films were found to be controlled by reaction sites in polymer films such as hydroxy groups (the (100) crystal face), carbonyl groups (the (111) crystal face), and amide groups (the (100) crystal face). The HKUST-1 film growth amount is highly correlated with the polar component of the surface free energy, indicating that polymer sites, which afford hydrogen and coordination bonding, are important for the initial adsorption of Cu complexes.

Direct Correlation of Nanoscale Morphology and Device Performance to Study Photocurrent Generation in Donor-Enriched Phases of Polymer Solar Cells.

The nanoscale morphology of polymer blends is a key parameter to reach high efficiency in bulk heterojunction solar cells. Thereby, research typically focusing on optimal blend morphologies while studying nonoptimized blends may give insight into blend designs that can prove more robust against morphology defects. Here, we focus on the direct correlation of morphology and device performance of thieno[3,4-]-thiophene--benzodithiophene (PTB7):[6,6]phenyl C butyric acid methyl ester (PCBM) bulk heterojunction (BHJ) blends processed without additives in different donor/acceptor weight ratios.

Electronic and Crystallographic Examinations of the Homoepitaxially Grown Rubrene Single Crystals.

Homoepitaxial growth of organic semiconductor single crystals is a promising methodology toward the establishment of doping technology for organic opto-electronic applications. In this study, both electronic and crystallographic properties of homoepitaxially grown single crystals of rubrene were accurately examined. Undistorted lattice structures of homoepitaxial rubrene were confirmed by high-resolution analyses of grazing-incidence X-ray diffraction (GIXD) using synchrotron radiation.

Effects of a Fluorinated Donor Polymer on the Morphology, Photophysics, and Performance of All-Polymer Solar Cells Based on Naphthalene Diimide-Arylene Copolymer Acceptors.

Naphthalene diimide (NDI)-biselenophene copolymer (PNDIBS), NDI-selenophene copolymer (PNDIS), and the fluorinated donor polymer PM6 were used to investigate how a fluorinated polymer component affects the morphology and performance of all-polymer solar cells (all-PSCs). Although the PM6:PNDIBS blend system exhibits a high open-circuit voltage ( = 0.925 V) and a desired low optical bandgap energy loss ( = 0.

Orbital-Energy Modulation of Tetrabenzoporphyrin-Derived Non-Fullerene Acceptors for Improved Open-Circuit Voltage in Organic Solar Cells.

Tetrabenzoporphyrin (BP) holds attractive characteristics for optoelectronic applications, such as the large π-conjugated framework and high photoabsorption capability. However, its use in organic solar cells (OSCs) has been limited because of the extremely low solubility that hampers direct solution processing and also the high frontier-orbital energies that lead to low open-circuit voltage (). Herein, we examine BP derivatives equipped with multiple strongly electron-withdrawing groups for photovoltaic applications.

Widely Dispersed Intermolecular Valence Bands of Epitaxially Grown Perfluoropentacene on Pentacene Single Crystals.

Strong intermolecular electronic coupling and well-ordered molecular arrangements enable efficient transport of both charge carriers and excitons in semiconducting π-conjugated molecular solids. Thus, molecular heteroepitaxy to form crystallized donor-acceptor molecular interfaces potentially leads to a novel strategy for creating efficient organic optoelectronic devices via the concomitance of these two requirements. In the present study, the crystallographic and electronic structures of a heteroepitaxial molecular interface, perfluoropentacene (PFP, CF) grown on pentacene single crystals (Pn-SCs, CH), were determined by means of grazing-incidence X-ray diffraction (GIXD) and angle-resolved ultraviolet photoelectron spectroscopy (ARUPS), respectively.

Alternative Face-on Thin Film Structure of Pentacene.

Pentacene attracts a great deal of attention as a basic material used in organic thin-film transistors for many years. Pentacene is known to form a highly ordered structure in a thin film, in which the molecular long axis aligns perpendicularly to the substrate surface, i.e.

Improvement in interlayer structure of p-i-n-type organic solar cells with the use of fullerene-linked tetrabenzoporphyrin as additive.

The additive effect on small-molecule-based p-i-n-type devices has been little investigated so far. We focus on the improvement of the miscibility of tetrabenzoporphyrin (BP) and [6,6]-phenyl-C-butyric acid methyl ester (PCBM) blend film by addition of fullerene-linked tetrabenzoporphyrin (BP-C) as an additive to the interlayer (i-layer). BP is one of the most promising p-type organic semiconductors, and BP films can be prepared readily by heating as-cast films of the precursor (a bicyclo[2.

Correlation between Distribution of Polymer Orientation and Cell Structure in Organic Photovoltaics.

The backbone orientation of semiconducting polymers is one of the important structural factors that determines the charge transport and thus the performance of optoelectronic devices. Here, we study two sets of thiophene-thiazolothiazole polymers, which primarily form edge-on and face-on orientations, termed "edge-on-polymers" and "face-on-polymers", respectively; both orientation types co-exist in their polymer/fullerene blend films. Interestingly, we find that the dependence of the photoactive layer thickness on the fill factor in the photovoltaic cells, with the inverted and conventional structures, is quite distinct in the edge-on-polymer; however, this is not evident in the face-on-polymers.