From Ions to Crystals: A Comprehensive View of the Non-Classical Nucleation of Calcium Sulfate.

The early stages of mineralization continue to be in the focus of intensive research due to their inherent importance for natural and engineered environments. While numerous observations have been reported for single steps in the pathways of various crystallizing phases in previous studies, the complexity of the underlying processes and their elusive character have left central questions unanswered in most cases. In the present work, we provide a detailed view on the nucleation of calcium sulfate mineralization-an abundant mineral with broad use in construction industry-in aqueous systems at ambient conditions.

Evidence for liquid-liquid phase separation during the early stages of Mg-struvite formation.

The precipitation of struvite, a magnesium ammonium phosphate hexahydrate (MgNH4PO4 · 6H2O) mineral, from wastewater is a promising method for recovering phosphorous. While this process is commonly used in engineered environments, our understanding of the underlying mechanisms responsible for the formation of struvite crystals remains limited. Specifically, indirect evidence suggests the involvement of an amorphous precursor and the occurrence of multi-step processes in struvite formation, which would indicate non-classical paths of nucleation and crystallization.

Surface Modification of Kraft Lignin by Mechanochemical Processing with Sodium Percarbonate.

In this article, we present a novel one-pot mechanochemical reaction for the surface activation of lignin. The process involves environmentally friendly oxidation with hydrogen peroxide, depolymerization of fractions with high molecular mass, and introduction of new carbonyl functions into the lignin backbone. Kraft lignin was ground with sodium percarbonate and sodium hydroxide in a ball mill at different time intervals.

BAMline-A real-life sample materials research beamline.

With increasing demand and environmental concerns, researchers are exploring new materials that can perform as well or better than traditional materials while reducing environmental impact. The BAMline, a real-life sample materials research beamline, provides unique insights into materials' electronic and chemical structure at different time and length scales. The beamline specializes in x-ray absorption spectroscopy, x-ray fluorescence spectroscopy, and tomography experiments.

Thermally processed Ni-and Co-struvites as functional materials for proton conductivity.

Here, we describe how to synthesise proton-conductive transition metal phosphates (TMPs) by direct thermal processing of precursor M-struvites, NHMPO·6HO, with M = Ni, Co. In the as-derived TMP phases their thermal history and bulk proton conductivity were linked with the structural information about the metal coordination, phosphate groups, and volatile compounds. These aspects were investigated with vibrational and synchrotron-based spectroscopic methods (FT-IR, FT-RS, XAS).

Study of a Local Structure at the Interface between Corrosion Films and Carbon Steel Surface in Undersaturated CO Environments.

Industries transporting CO gas-saturated fluids have infrastructures made of carbon steel. This is a good material with great mechanical properties but prone to corrosion and potential failure. Corrosion in sweet environments involves the formation of FeCO as a corrosion film, which is recognized to play a protective role under certain conditions.

Advanced materials engineering in historical gypsum plaster formulations.

We show how historical gypsum plaster preparation methods affect the microstructure and the wettability properties of the final stucco materials. We reproduced a traditional Persian recipe ( ~14th century AD), which involves a continuous mechanical treatment during plaster hydration. These samples were compared with a laboratory-replicated historical recipe from Renaissance Italy ( ~15th century AD) and contemporary low-strength plaster.

Template-free synthesis of mesoporous and amorphous transition metal phosphate materials.

We present how mesoporosity can be engineered in transition metal phosphate (TMPs) materials in a template-free manner. The method involves the transformation of a precursor metal phosphate phase, called M-struvite (NHMPO·6HO, M = Mg, Ni, Co, NiCo). It relies on the thermal decomposition of crystalline M-struvite precursors to an amorphous and simultaneously mesoporous phase, which forms during degassing of NH and HO.

Towards automation of the polyol process for the synthesis of silver nanoparticles.

Metal nanoparticles have a substantial impact across different fields of science, such as photochemistry, energy conversion, and medicine. Among the commonly used nanoparticles, silver nanoparticles are of special interest due to their antibacterial properties and applications in sensing and catalysis. However, many of the methods used to synthesize silver nanoparticles often do not result in well-defined products, the main obstacles being high polydispersity or a lack of particle size tunability.

Formation Mechanism of a Nano-Ring of Bismuth Cations and Mono-Lacunary Keggin-Type Phosphomolybdate.

A new hetero-bimetallic polyoxometalate (POM) nano-ring was synthesized in a one-pot procedure. The structure consists of tetrameric units containing four bismuth-substituted monolacunary Keggin anions including distorted [BiO ] cubes. The nano-ring is formed via self-assembly from metal precursors in aqueous acidic medium.

Seeds of imperfection rule the mesocrystalline disorder in natural anhydrite single crystals.

In recent years, we have come to appreciate the astounding intricacies associated with the formation of minerals from ions in aqueous solutions. In this context, a number of studies have revealed that the nucleation of calcium sulfate systems occurs nonclassically, involving the aggregation and reorganization of nanosized prenucleation species. In recent work, we have shown that this particle-mediated nucleation pathway is actually imprinted in the resultant micrometer-sized CaSO crystals.

A template-free and low temperature method for the synthesis of mesoporous magnesium phosphate with uniform pore structure and high surface area.

Mesoporous phosphates are a group of nanostructured materials with promising applications, particularly in biomedicine and catalysis. However, their controlled synthesis via conventional template-based routes presents a number of challenges and limitations. Here, we show how to synthesize a mesoporous magnesium phosphate with a high surface area and a well-defined pore structure through thermal decomposition of a crystalline struvite (MgNH4PO4·6H2O) precursor.

Mechanism of silica-lysozyme composite formation unravelled by in situ fast SAXS.

A quantitative understanding of aggregation mechanisms leading to the formation of composites of inorganic nanoparticles (NPs) and proteins in aqueous media is of paramount interest for colloid chemistry. In particular, the interactions between silica (SiO) NPs and lysozyme (LZM) have attracted attention, because LZM is well-known to adsorb strongly to silica NPs, while at the same time preserving its enzymatic activity. The inherent nature of the aggregation processes leading to NP-LZM composites involves structural changes at length scales from few to at least hundreds of nanometres but also time scales much smaller than one second.

Following the Kinetics of Barium Titanate Nanocrystal Formation in Benzyl Alcohol Under Near-Ambient Conditions.

In complex chemical syntheses (e.g., coprecipitation reactions), nucleation, growth, and coarsening often occur concurrently, obscuring the individual processes.

A highly reactive precursor in the iron sulfide system.

Iron sulfur (Fe-S) phases have been implicated in the emergence of life on early Earth due to their catalytic role in the synthesis of prebiotic molecules. Similarly, Fe-S phases are currently of high interest in the development of green catalysts and energy storage. Here we report the synthesis and structure of a nanoparticulate phase (FeS) that is a necessary solid-phase precursor to the conventionally assumed initial precipitate in the iron sulfide system, mackinawite.

"On demand" triggered crystallization of CaCO from solute precursor species stabilized by the water-in-oil microemulsion.

Can we control the crystallization of solid CaCO3 from supersaturated aqueous solutions and thus mimic a natural process predicted to occur in living organisms that produce biominerals? Here we show how we achieved this by confining the reaction between Ca2+ and CO32- ions to the environment of nanosized water cores of water-in-oil microemulsions, in which the reaction between the ions is controlled by the intermicellar exchange processes. Using a combination of in situ small-angle X-ray scattering, high-energy X-ray diffraction, and low-dose liquid-cell scanning transmission electron microscopy, we elucidate how the presence of micellar interfaces leads to the formation of a solute CaCO3 phase/species that can be stabilized for extended periods of time inside micellar water nano-droplets. The nucleation and growth of any solid CaCO3 polymorph, including the amorphous phase, from such nano-droplets is prevented despite the fact that the water cores in the used microemulsion are highly supersaturated with respect to all known calcium carbonate solid phases.

Ferrihydrite Formation: The Role of Fe13 Keggin Clusters.

Ferrihydrite is the most common iron oxyhydroxide found in soil and is a key sequester of contaminants in the environment. Ferrihydrite formation is also a common component of many treatment processes for cleanup of industrial effluents. Here we characterize ferrihydrite formation during the titration of an acidic ferric nitrate solution with NaOH.

The Molecular Mechanism of Iron(III) Oxide Nucleation.

A molecular understanding of the formation of solid phases from solution would be beneficial for various scientific fields. However, nucleation pathways are still not fully understood, whereby the case of iron (oxyhydr)oxides poses a prime example. We show that in the prenucleation regime, thermodynamically stable solute species up to a few nanometers in size are observed, which meet the definition of prenucleation clusters.

Formation of calcium sulfate through the aggregation of sub-3 nanometre primary species.

The formation pathways of gypsum remain uncertain. Here, using truly in situ and fast time-resolved small-angle X-ray scattering, we quantify the four-stage solution-based nucleation and growth of gypsum (CaSO4·2H2O), an important mineral phase on Earth and Mars. The reaction starts through the fast formation of well-defined, primary species of <3 nm in length (stage I), followed in stage II by their arrangement into domains.

Formation of nanocrystalline barium titanate in benzyl alcohol at room temperature.

Nanocrystalline barium titanate (8-10 nm crystallite size) was prepared at temperatures of 23-78 °C through reaction of a modified titanium alkoxide precursor in benzyl alcohol with barium hydroxide octahydrate. The room temperature formation of a perovskite phase from solution is associated with the use of benzyl alcohol as solvent medium. The formation mechanism was elucidated by studying the stability and interaction of each precursor with the solvent and with each other using various experimental characterization techniques.

SAXS in inorganic and bioinspired research.

In situ and time-resolved structural information about emergent microstructures that progressively develop during the formation of inorganic or biologically mediated solid phases from solution is fundamental for understanding of the mechanisms driving complex precipitation reactions, for example, during biomineralization. In this brief chapter, we present the use of small- and wide-angle X-ray scattering (SAXS and WAXS) techniques and show how SAXS can be used to gather structural information on the nanoscale properties of the de novo-forming entities. We base the discussion on several worked examples of inorganic materials such as calcium carbonate, silica, and perovskite-type titanates.

Evolution of microstructure in mixed niobia-hybrid silica thin films from sol-gel precursors.

The evolution of structure in sol-gel derived mixed bridged silsesquioxane-niobium alkoxide sols and drying thin films was monitored in situ by small-angle X-ray scattering. Since sol-gel condensation of metal alkoxides proceeds much faster than that of silicon alkoxides, the incorporation of d-block metal dopants into silica typically leads to formation of densely packed nano-sized metal oxide clusters that we refer as metal oxide building blocks in a silica-based matrix. SAXS was used to study the process of niobia building block formation while drying the sol as a thin film at 40-80°C.

Time-resolved small angle X-ray scattering study of sol-gel precursor solutions of lead zirconate titanate and zirconia.

The evolution of nanostructure in sol-gel derived lead zirconate titanate (PZT) and zirconia precursor sols at different hydrolysis ratios was investigated by small angle X-ray scattering (SAXS). The shape of the clusters in the zirconia sol could be described by the length-polydisperse cylindrical form factor. The zirconia-based clusters were characterized by a cross-sectional radius, r(0), of 0.

Thin films of two functional oxides patterned laterally by soft lithography.

Thin films of two laterally patterned functional oxides of uniform thickness were obtained in a two-step soft-lithographic micromolding process. CoFe(2)O(4)/ZnO and CoFe(2)O(4)/BaTiO(3) dual-phase patterns were fabricated. The films showed good replication of the pattern that was defined in the first patterning step.

Development of nanoscale inhomogeneities during drying of sol-gel derived amorphous lead zirconate titanate precursor thin films.

The structural evolution of sol-gel derived lead zirconate titanate (PZT) precursor films during and after physical drying was investigated by transmission electron microscopy (TEM), electron energy loss spectroscopy (EELS), selected area electron diffraction (SAED), and time-resolved X-ray diffraction (XRD). Films were deposited from initial 0.3 mol/dm(3) precursor sols with varying hydrolysis ratios.