Do CSIA data from aquifers inform on natural degradation of chlorinated ethenes in aquitards?

Back-diffusion of chlorinated ethenes (CEs) from low-permeability layers (LPLs) causes contaminant persistence long after the primary spill zones have disappeared. Naturally occurring degradation in LPLs lowers remediation time frames, but its assessment through sediment sampling is prohibitive in conventional remediation projects. Scenario simulations were performed with a reactive transport model (PHT3D in FloPy) accounting for isotope effects associated with degradation, sorption, and diffusion, to evaluate the potential of CSIA data from aquifers in assessing degradation in aquitards.

Derivatization-free method for compound-specific isotope analysis of nonexchangeable hydrogen of 4-bromophenol.

Rationale: Compound-specific isotope analysis (CSIA) is a valuable tool in environmental chemistry and in other fields of science. Currently, hydrogen CSIA of polar compounds containing exchangeable hydrogen is uncommon. To extend the scope of CSIA applications, we present an alternative method of analysis, bypassing the typical step of derivatization.

Degradation of 4-bromophenol by Ochrobactrum sp. HI1 isolated from desert soil: pathway and isotope effects.

Anthropogenic activities have introduced elevated levels of brominated phenols to the environment. These compounds are associated with toxic and endocrine effects, and their environmental fate is of interest. An aerobic strain Ochrobactrum sp.

Carbon Isotope Fractionation of 1,2-Dibromoethane by Biological and Abiotic Processes.

1,2-Dibromethane (EDB) is a toxic fuel additive that likely occurs at many sites where leaded fuels have impacted groundwater. This study quantified carbon (C) isotope fractionation of EDB associated with anaerobic and aerobic biodegradation, abiotic degradation by iron sulfides, and abiotic hydrolysis. These processes likely contribute to EDB degradation in source zones (biodegradation) and in more dilute plumes (hydrolysis).

Assessment of anaerobic biodegradation of bis(2-chloroethyl) ether in groundwater using carbon and chlorine compound-specific isotope analysis.

Carbon and chlorine compound specific isotope analysis (CSIA) of bis(2-chloroethyl) ether (BCEE) was performed to distinguish the primary processes contributing to observed concentration reductions in an anaerobic groundwater plume. Laboratory microcosms were constructed to demonstrate and obtain isotopic enrichment factors and dual-element CSIA trends from two potential transformation processes (1) anaerobic biodegradation using saturated sediment samples from the field site (ε=-14.8 and ε=-5.

Modeling 3D-CSIA data: Carbon, chlorine, and hydrogen isotope fractionation during reductive dechlorination of TCE to ethene.

Reactive transport modeling of multi-element, compound-specific isotope analysis (CSIA) data has great potential to quantify sequential microbial reductive dechlorination (SRD) and alternative pathways such as oxidation, in support of remediation of chlorinated solvents in groundwater. As a key step towards this goal, a model was developed that simulates simultaneous carbon, chlorine, and hydrogen isotope fractionation during SRD of trichloroethene, via cis-1,2-dichloroethene (and trans-DCE as minor pathway), and vinyl chloride to ethene, following Monod kinetics. A simple correction term for individual isotope/isotopologue rates avoided multi-element isotopologue modeling.

3D-CSIA: carbon, chlorine, and hydrogen isotope fractionation in transformation of TCE to ethene by a Dehalococcoides culture.

Carbon (C), chlorine (Cl), and hydrogen (H) isotope effects were determined during dechlorination of TCE to ethene by a mixed Dehalococcoides (Dhc) culture. The C isotope effects for the dechlorination steps were consistent with data published in the past for reductive dechlorination (RD) by Dhc. The Cl effects (combined with an inverse H effect in TCE) suggested that dechlorination proceeded through nucleophilic reactions with cobalamin rather than by an electron transfer mechanism.

Demonstration of compound-specific isotope analysis of hydrogen isotope ratios in chlorinated ethenes.

High-temperature pyrolysis conversion of organic analytes to H(2) in hydrogen isotope ratio compound-specific isotope analysis (CSIA) is unsuitable for chlorinated compounds such as trichloroethene (TCE) and cis-1,2-dichloroethene (DCE), due to competition from HCl formation. For this reason, the information potential of hydrogen isotope ratios of chlorinated ethenes remains untapped. We present a demonstration of an alternative approach where chlorinated analytes reacted with chromium metal to form H(2) and minor amounts of HCl.

Validation of adsorbents for sample preconcentration in compound-specific isotope analysis of common vapor intrusion pollutants.

Isotope ratios of volatile organic compounds (VOCs) in the environment are often of interest in contaminant fate studies. Adsorbent preconcentration-thermal desorption of VOCs can be used to collect environmental vapor samples for compound-specific isotope analysis (CSIA). While active adsorbent samplers offer logistic benefits in handling large volumes of air, their performance in preserving VOCs isotope ratios was not previously tested under sampling conditions corresponding to typical indoor air sampling conditions.

Carbon isotope fractionation in reactions of 1,2-dibromoethane with FeS and hydrogen sulfide.

EDB (1,2-dibromoethane) is frequently detected at sites impacted by leaded gasoline. In reducing environments, EDB is highly susceptible to abiotic degradation. A study was conducted to evaluate the potential of compound-specific isotope analysis (CSIA) in assessing abiotic degradation of EDB in sulfate-reducing environments.

Application of CSIA to distinguish between vapor intrusion and indoor sources of VOCs.

At buildings with potential for vapor intrusion of volatile organic chemicals (VOCs) from the subsurface, the ability to accurately distinguish between vapor intrusion and indoor sources of VOCs is needed to support accurate and efficient vapor intrusion investigations. We have developed a method for application of compound-specific stable isotope analysis (CSIA) for this purpose that uses an adsorbent sampler to obtain sufficient sample mass from the air for analysis. Application of this method to five residences near Hill Air Force Base in Utah indicates that subsurface and indoor sources of tricholorethene and tetrachloroethene often exhibit distinct carbon and chlorine isotope ratios.

Effects of volatilization on carbon and hydrogen isotope ratios of MTBE.

Contaminant attenuation studies utilizing CSIA (compound-specific isotope analysis) routinely assume that isotope effects (IEs) result only from degradation. Experimental results on MTBE behavior in diffusive volatilization and dynamic vapor extraction show measurable changes in the isotope ratios of the MTBE remaining in the aqueous or nonaqueous phase liquid (NAPL) matrix. A conceptual model for interpretation of those IEs is proposed, based on the physics of liquid-air partitioning.

Anaerobic biodegradation of ethylene dibromide and 1,2-dichloroethane in the presence of fuel hydrocarbons.

Field evidence from underground storage tank sites where leaded gasoline leaked indicates the lead scavengers 1,2-dibromoethane (ethylene dibromide, or EDB) and 1,2-dichloroethane (1,2-DCA) may be present in groundwater at levels that pose unacceptable risk. These compounds are seldom tested for at UST sites. Although dehalogenation of EDB and 1,2-DCA is well established, the effect of fuel hydrocarbons on their biodegradability under anaerobic conditions is poorly understood.

Distinguishing abiotic and biotic transformation of tetrachloroethylene and trichloroethylene by stable carbon isotope fractionation.

Significant carbon isotope fractionation was observed during FeS-mediated reductive dechlorination of tetrachloroethylene (PCE) and trichloroethylene (TCE). Bulk enrichment factors (E(bulk)) for PCE were -30.2 +/- 4.

Enrichment of stable carbon and hydrogen isotopes during anaerobic biodegradation of MTBE: microcosm and field evidence.

The conventional approach to evaluate biodegradation of organic contaminants in groundwater is to demonstrate an increase in the concentration of transformation products. This approach is problematic for MTBE from gasoline spills because the primary transformation product (TBA) can also be a component of gasoline. Compound-specific stable isotope analysis may provide a useful alternative to conventional practice.

Use of compound-specific stable carbon isotope analyses to demonstrate anaerobic biodegradation of MTBE in groundwater at a gasoline release site.

Currently it is unclear if natural attenuation is an appropriate remedial approach for groundwater impacted by methyl tertiary butyl ether (MTBE). Site-characterization data at most gasoline release sites are adequate to evaluate attenuation in MTBE concentrations over time or distance. But, demonstrating natural biodegradation of MTBE requires laboratory microcosm studies, which could be expensive and time-consuming.