3D-Printable Rotary Valves for Low-Pressure Pneumatic and Fluidic Applications in Analytical Chemistry.

We report on a fused deposition modeling 3D-printable rotary valve fabricated from high-grade plastics such as polyether ether ketone or lower-grade plastics like polylactic acid. The valve weighs less than 90 g and has the potential to be integrated into portable and autonomous chemical analysis systems. It has been demonstrated to be leak-proof up to 2.

Searching for Chemical Agents Suppressing Substrate Microbiota in White-Rot Fungi Large-Scale Cultivation.

Edible fungi are a valuable resource in the search for sustainable solutions to environmental pollution. Their ability to degrade organic pollutants, extract heavy metals, and restore ecological balance has a huge potential for bioremediation. They are also sustainable food resources.

Submersible Capillary Electrophoresis Analyzer: A Proof-of-Concept Demonstration of an In Situ Instrument for Future Missions to Ocean Worlds.

We report here the first fully automated capillary electrophoresis (CE) system that can be operated underwater. The system performs sample acquisition and analysis by coupling CE to contactless conductivity detection. Using 5 M acetic acid as the background electrolyte (BGE), inorganic cations and amino acids at concentrations as low as 5.

A gravity-independent single-phase electrode reservoir for capillary electrophoresis applications.

Capillary electrophoresis (CE) holds great promise as an in situ analytical technique for a variety of applications. However, typical instrumentation operates with open reservoirs (e.g.

Peculiarities of Integrating Mechanical Valves in Microfluidic Channels Using Direct Laser Writing.

Regenerative medicine is a fast expanding scientific topic. One of the main areas of development directions in this field is the usage of additive manufacturing to fabricate functional components that would be later integrated directly into the human body. One such structure could be a microfluidic valve which could replace its biological counterpart in veins as it is worn out over the lifetime of a patient.

Fabrication of Microfluidic Tesla Valve Employing Femtosecond Bursts.

Expansion of the microfluidics field dictates the necessity to constantly improve technologies used to produce such systems. One of the approaches which are used more and more is femtosecond (fs) direct laser writing (DLW). The subtractive model of DLW allows for directly producing microfluidic channels via ablation in an extremely simple and cost-effective manner.

Analysis of the Leaves and Cones of Lithuanian Hops ( L.) Varieties by Chromatographic and Spectrophotometric Methods.

This work involves a comprehensive chemical composition analysis of leaf and cone samples of Lithuanian hop varieties. This study aimed to determine the chemometric properties of the leaves and cones of five Lithuanian hop varieties. Determined properties were the following: (a) xanthohumol content, (b) phenolic compounds, (c) flavonoids, (d) radical scavenging activity, and (e) the qualitative composition of volatile compounds.

Providing Enhanced Migration Time Reproducibility with a High-Voltage-Compatible Flow Sensor for Capillary Electrophoresis.

In capillary electrophoresis (CE), analyte identification is primarily based on migration time, which is a function of the analyte's electrophoretic mobility and the electro-osmotic flow (EOF). The migration time can be impacted by the presence of parasitic flow from changes in temperature or pressure during the run. Presented here is a high-voltage-compatible flow sensor capable of monitoring the volumetric flow inside the capillary during a separation with nL/min resolution.

Mathematical Model Coupled to Neural Networks Calculates the Extraction Recovery of Polycyclic Aromatic Hydrocarbons in Problematic Matrix.

Unknown extraction recovery from solid matrix samples leads to meaningless chemical analysis results. It cannot always be determined, and it depends on the complexity of the matrix and properties of the extracted substances. This paper combines a mathematical model with the machine learning method-neural networks that predict liquid extraction recovery from solid matrices.

Single-chip based contactless conductivity detection system for multi-channel separations.

In this work, the design and characterization of a multi-cell capacitively coupled contactless conductivity detection system are described. The operation and simultaneous acquisition from 3 detector cells are demonstrated, however, the system is capable of supplying 8 detection cells and can be easily upgraded to maintain 64 capacitively coupled contactless conductivity detection cells. On performing flow-injection analysis, the system recorded as low as 0.

Complete capillary electrophoresis process on a drone: towards a flying micro-lab.

Hazardous remote places exist in the world. Why should health or life be risked sending a scientist to the investigation site, as the remote analytical instrumentation exists? Different scientific fields require instruments that could be used on-site (in situ), therefore the purpose of this work was to design a fully automated chemical analysis system small enough to be mountable on a drone. Here we show an autonomous analytical system with sampling capability on a drone.

In vitro antiviral activity of fifteen plant extracts against avian infectious bronchitis virus.

Background: Avian infectious bronchitis (IB) is a disease that can result in huge economic losses in the poultry industry. The high level of mutations of the IB virus (IBV) leads to the emergence of new serotypes and genotypes, and limits the efficacy of routine prevention. Medicinal plants, or substances derived from them, are being tested as options in the prevention of infectious diseases such as IB in many countries.

Chromatographic Data Segmentation Method: A Hybrid Analytical Approach for the Investigation of Antiviral Substances in Medicinal Plant Extracts.

The methodology described in this article will significantly reduce the time required for understanding the relations between chromatographic data and bioactivity assays. The methodology is a hybrid of hypothesis-based and data-driven scientific approaches. In this work, a novel chromatographic data segmentation method is proposed, which demonstrates the capability of finding what volatile substances are responsible for antiviral and cytotoxic effects in the medicinal plant extracts.

Optimization of a capillary zone electrophoresis-contactless conductivity detection method for the determination of nisin.

Determination of natural preservatives using electrophoretic or chromatographic techniques in fermented milk products is a complex task due to the following reasons: (i) the concentrations of the analytes can be below the detection limits, (ii) complex matrix and comigrating/coeluting compounds in the sample can interfere with the analytes of the interest, (iii) low recovery of the analytes, and (iv) the necessity of complex sample preparation. The aim of this study was to apply capillary zone electrophoresis coupled with contactless conductivity detection for the separation and determination of nisin in fermented milk products. In this work, separation and determination of natural preservative-nisin in fermented milk products is described.

Compensation of the baseline temperature fluctuations for autonomous CE-C4D instrument working in harsh environments.

One of the main problems of the remote complex sample analysis instrumentation is that such systems are susceptible to temperature fluctuations. Temperature regulation is energetically ineffective, and it is not used in most of the field portable analytical systems. Separations performed in a changing temperature environment provide electropherograms with considerable baseline fluctuations, resulting in significant errors in detection and integration of the peaks.

Capillary Electrophoresis Sensitivity Enhancement Based on Adaptive Moving Average Method.

In the present work, we demonstrate a novel approach to improve the sensitivity of the "out of lab" portable capillary electrophoretic measurements. Nowadays, many signal enhancement methods are (i) underused (nonoptimal), (ii) overused (distorts the data), or (iii) inapplicable in field-portable instrumentation because of a lack of computational power. The described innovative migration velocity-adaptive moving average method uses an optimal averaging window size and can be easily implemented with a microcontroller.

Effect of molecular weight of chitosan on the shelf life and other quality parameters of three different cultivars of Actinidia kolomikta (kiwifruit).

The kiwi fruit, Actinidia kolomikta, has valuable properties such as high antioxidant activity, high vitamin C, polyphenols, chlorophylls and organic acids content, but the species are hardly commercialized due to their short shelf life (less than two days). In this study three different cultivars of A. kolomikta (Anykšta, Sentiabrskaya and VIR2) were coated with low, medium and high molecular weight chitosan bio-polymer with the aim to extend the shelf life.

Analysis of antiproliferative effect of Chamerion angustifolium water extract and its fractions on several breast cancer cell lines.

Purpose: To evaluate the antiproliferative effect of the aerial part of Chamerion angustifolium (L.) Holub. (Onagraceae) extract and its fractions in vitro.

Downscaling the in vitro test of fungal bioremediation of polycyclic aromatic hydrocarbons: methodological approach.

The miniaturization and optimization of a white rot fungal bioremediation experiment is described in this paper. The optimized procedure allows determination of the degradation kinetics of anthracene. The miniaturized procedure requires only 2.

Evaluation of phytochemical composition of fresh and dried raw material of introduced Chamerion angustifolium L. using chromatographic, spectrophotometric and chemometric techniques.

Due to the wide spectrum of biological activities, Chamerion angustifolium L. as medicinal plant is used for the production of food supplements. However, it should be kept in mind that quality (biological activity) of the herb depends on its geographic origin, the way of raw material preparation or extraction and chemotype.

Capacitance-to-digital: the upgrades of single chip detector.

The capacitance-to-digital single chip detector was upgraded. The paper discusses hardware issues and benefits of the designed/upgraded detector. The device can be operated from rechargeable lithium-ion battery as stand-alone, portable system and is capable of transmitting real-time data wirelessly.

Capacitance-to-digital: a single chip detector for capillary electrophoresis.

A capacitance-to-digital converter integrated circuit was implemented in an automated CE device as a single chip detector. In this paper, design and hardware issues related to the fabrication and application of a miniature detector for contactless measurement of complex impedance are discussed. The capacitance-to-digital converter integrated circuit was used as the whole detector.

Study of tolnaftate release from fatty acids containing ointment and penetration into human skin ex vivo.

Five fatty acids (oleic, linoleic, myristic, lauric and capric) were incorporated in 10% (w/w) into ointment formulation and their influence on lipophilic model drug tolnaftate release in vitro and enhancing effect on tolnaftate penetration into epidermis and dermis of human skin ex vivo were investigated. The prepared ointments were tested for homogeneity, pH and theological properties. In vitro release studies and ex vivo skin penetration experiments were carried out using Hanson and Bronaugh-type flow-through diffusion cells, respectively.