Chitosan/vanillin/polydimethylsiloxane scaffolds with tunable stiffness for muscle cell proliferation.

The mechanical properties of scaffolds can significantly influence cell behavior. We propose a methodology for producing chitosan and vanillin-crosslinked chitosan films with tunable mechanical properties to be applied as scaffolds for C2C12 myoblasts. In this approach, aqueous polydimethylsiloxane (PDMS) elastomeric dispersions were prepared using polysorbate 20 as emulsifier.

Glass Surface Nanostructuring by Soft Lithography and Chemical Etching.

Due to its high durability and transparency, soda lime glass holds a huge potential for several applications such as photovoltaics, optical instrumentation and biomedical devices, among others. The different technologies request specific properties, which can be enhanced through the modification of the surface morphology with a nanopattern. Here, we report a simple method to nanostructure a glass surface with soft lithography and wet-chemical etching in potassium hydroxide (KOH) solutions.

Micropatterned Nanofiber Scaffolds of Salmon Gelatin, Chitosan, and Poly(vinyl alcohol) for Muscle Tissue Engineering.

The development of scaffolds that mimic the aligned fibrous texture of the extracellular matrix has become an important requirement in muscle tissue engineering. Electrospinning is a widely used technique to fabricate biomimetic scaffolds. Therefore, a biopolymer blend composed of salmon gelatin (SG), chitosan (Ch), and poly(vinyl alcohol) (PVA) was developed by electrospinning onto a micropatterned (MP) collector, resulting in a biomimetic scaffold for seeding muscle cells.

Effect of Electrical Stimulation on PC12 Cells Cultured in Different Hydrogels: Basis for the Development of Biomaterials in Peripheral Nerve Tissue Engineering.

Extensive damage to peripheral nerves is a health problem with few therapeutic alternatives. In this context, the development of tissue engineering seeks to obtain materials that can help recreate environments conducive to cellular development and functional repair of peripheral nerves. Different hydrogels have been studied and presented as alternatives for future treatments to emulate the morphological characteristics of nerves.

Squeezing Drops: Force Measurements of the Cassie-to-Wenzel Transition.

Superhydrophobic surfaces have long been the center of attention of many researchers due to their unique liquid repellency and self-cleaning properties. However, these unique properties rely on the stability of the so-called Cassie state, which is a metastable state with air-filled microstructures. This state tends to transit to the stable Wenzel state, where the inside of the microstructures eventually wets.

How water wets and self-hydrophilizes nanopatterns of physisorbed hydrocarbons.

Hypothesis: Weakly bound, physisorbed hydrocarbons could in principle provide a similar water-repellency as obtained by chemisorption of strongly bound hydrophobic molecules at surfaces.

Experiments: Here we present experiments and computer simulations on the wetting behaviour of water on molecularly thin, self-assembled alkane carpets of dotriacontane (n-CH or C32) physisorbed on the hydrophilic native oxide layer of silicon surfaces during dip-coating from a binary alkane solution. By changing the dip-coating velocity we control the initial C32 surface coverage and achieve distinct film morphologies, encompassing homogeneous coatings with self-organised nanopatterns that range from dendritic nano-islands to stripes.

Sustainable Lightweight Biochar-Based Composites with Electromagnetic Shielding Properties.

Global warming has prompted a search for new materials that capture and sink carbon dioxide (CO). Biochar is a derivative of biomass pyrolysis and a carbon sink mainly used to improve crop production. This work explores the underlying mechanism behind biochar's electric conductivity using a wide range of feedstocks and its combination with a binder (gypsum).

Dry Two-Step Self-Assembly of Stable Supported Lipid Bilayers on Silicon Substrates.

Artificial membranes are models for biological systems and are important for applications. We introduce a dry two-step self-assembly method consisting of the high-vacuum evaporation of phospholipid molecules over silicon, followed by a subsequent annealing step in air. We evaporate dipalmitoylphosphatidylcholine (DPPC) molecules over bare silicon without the use of polymer cushions or solvents.

Microdroplet Contaminants: When and Why Superamphiphobic Surfaces Are Not Self-Cleaning.

Superamphiphobic surfaces are commonly associated with superior anticontamination and antifouling properties. Visually, this is justified by their ability to easily shed off drops and contaminants. However, on micropillar arrays, tiny droplets are known to remain on pillars' top faces while the drop advances.

Glass Transition in Crosslinked Nanocomposite Scaffolds of Gelatin/Chitosan/Hydroxyapatite.

The development of biopolymeric scaffolds crosslinked with nanoparticles is an emerging field. Gelatin/chitosan scaffolds are gaining interest in medical areas, e.g.

Surface Morphology of Vapor-Deposited Chitosan: Evidence of Solid-State Dewetting during the Formation of Biopolymer Films.

Chitosan is a useful and versatile biopolymer with several industrial and biological applications. Whereas its physical and physicochemical bulk properties have been explored quite intensively in the past, there is a lack of studies regarding the morphology and growth mechanisms of thin films of this biopolymer. Of particular interest for applications in bionanotechnology are ultrathin films with thicknesses under 500 Å.

Breaking Nano-Spaghetti: Bending and Fracture Tests of Nanofibers.

Nanofibers composed of silica nanoparticles, used as structural building blocks, and polystyrene nanoparticles introduced as sacrificial material are fabricated by bicolloidal electrospinning. During fiber calcination, sacrificial particles are combusted leaving voids with controlled average sizes. The mechanical properties of the sintered silica fibers with voids are investigated by suspending the nanofiber over a gap and performing three-point bending experiments with atomic force microscopy.

Siliceous spicules enhance fracture-resistance and stiffness of pre-colonial Amazonian ceramics.

Pottery was a traditional art and technology form in pre-colonial Amazonian civilizations, widely used for cultural expression objects, utensils and as cooking vessels. Abundance and workability of clay made it an excellent choice. However, inferior mechanical properties constrained their functionality and durability.

Spontaneous formation of nanopatterns in velocity-dependent dip-coated organic films: from dragonflies to stripes.

We present an experimental study of the micro- and mesoscopic structure of thin films of medium length n-alkane molecules on the native oxide layer of a silicon surface, prepared by dip-coating in a n-C32H66/n-heptane solution. Electron micrographs reveal two distinct adsorption morphologies depending on the substrate withdrawal speed v. For small v, dragonfly-shaped molecular islands are observed.

Hybrid chalcogenide nanoparticles: 2D-WS2 nanocrystals inside nested WS2 fullerenes.

The MOCVD assisted formation of nested WS2 inorganic fullerenes (IF-WS2) was performed by enhancing surface diffusion with iodine, and fullerene growth was monitored by taking TEM snapshots of intermediate products. The internal structure of the core-shell nanoparticles was studied using scanning electron microscopy (SEM) after cross-cutting with a focused ion beam (FIB). Lamellar reaction intermediates were found occluded in the fullerene particles.

Flexible minerals: self-assembled calcite spicules with extreme bending strength.

Silicatein-α is responsible for the biomineralization of silicates in sponges. We used silicatein-α to guide the self-assembly of calcite "spicules" similar to the spicules of the calcareous sponge Sycon sp. The self-assembled spicules, 10 to 300 micrometers (μm) in length and 5 to 10 μm in diameter, are composed of aligned calcite nanocrystals.

Facile and large-scale fabrication of anisometric particles from fibers synthesized by colloid-electrospinning.

A new top-down approach is proposed to form large amounts of anisometric particles. Multicompartment fibers that present different domains composed of silica nanoparticles and larger polystyrene nanoparticles are fabricated by colloid-electrospinning and are subsequently calcinated and broken. The obtained fibers containing voids are subsequently cut via sonication to yield anisometric particles.

Crystalline-to-plastic phase transitions in molecularly thin n-dotriacontane films adsorbed on solid surfaces.

Crystalline-to-rotator phase transitions have been widely studied in bulk hydrocarbons, in particular in normal alkanes. But few studies of these transitions deal with molecularly thin films of pure n-alkanes on solid substrates. In this work, we were able to grow dotriacontane (n-C(32)H(66)) films without coexisting bulk particles, which allows us to isolate the contribution to the ellipsometric signal from a monolayer of molecules oriented with their long axis perpendicular to the SiO(2) surface.

Structure and growth of vapor-deposited n-dotriacontane films studied by X-ray reflectivity.

We have used synchrotron X-ray reflectivity measurements to investigate the structure of n-dotriacontane (n-C(32)H(66) or C32) films deposited from the vapor phase onto a SiO(2)-coated Si(100) surface. Our primary motivation was to determine whether the structure and growth mode of these films differ from those deposited from solution on the same substrate. The vapor-deposited films had a thickness of approximately 50 A thick as monitored in situ by high-resolution ellipsometry and were stable in air.