Embedded Fiber Bragg Grating Sensors for Monitoring Temperature and Thermo-Elastic Deformations in a Carbon Fiber Optical Bench.

A composite optical bench made up of Carbon Fiber Reinforced Polymer (CFRP) skin and aluminum honeycomb has been developed for the Tunable Magnetograph instrument (TuMag) for the SUNRISE III mission within the NASA Long Duration Balloon Program. This optical bench has been designed to meet lightweight and low sensitivity to thermal gradient requirements, resulting in a low Coefficient of Thermal Expansion (CTE). In addition to the flight model, a breadboard model identical to the flight one has been manufactured, including embedded fiber Bragg temperature and strain sensors.

Effect of Low-Doses of Gamma Radiation on Electric Arc-Induced Long Period Fiber Gratings.

This work presents an experimental study on the effects of gamma radiation on Long Period Fiber Gratings (LPFGs) in a low-dose test campaign to evaluate their eventual degradation. The study was carried out with standard single-mode fibers where the grating was inscribed using the Electric-Arc Discharge (EAD) technique. Before the gamma campaign, a detailed optical characterization was performed with repeatability tests to verify the accuracy of the setup and the associated error sources.

The Complex Molecules Detector (CMOLD): A Fluidic-Based Instrument Suite to Search for (Bio)chemical Complexity on Mars and Icy Moons.

Organic chemistry is ubiquitous in the Solar System, and both Mars and a number of icy satellites of the outer Solar System show substantial promise for having hosted or hosting life. Here, we propose a novel astrobiologically focused instrument suite that could be included as scientific payload in future missions to Mars or the icy moons: the Complex Molecules Detector, or CMOLD. CMOLD is devoted to determining different levels of prebiotic/biotic chemical and structural targets following a chemically general approach (, valid for both terrestrial and nonterrestrial life), as well as their compatibility with terrestrial life.

Surface Irregularity Factor as a Parameter to Evaluate the Fatigue Damage State of CFRP.

This work presents an optical non-contact technique to evaluate the fatigue damage state of CFRP structures measuring the irregularity factor of the surface. This factor includes information about surface topology and can be measured easily on field, by techniques such as optical perfilometers. The surface irregularity factor has been correlated with stiffness degradation, which is a well-accepted parameter for the evaluation of the fatigue damage state of composite materials.

Optical sensing of the fatigue damage state of CFRP under realistic aeronautical load sequences.

We present an optical sensing methodology to estimate the fatigue damage state of structures made of carbon fiber reinforced polymer (CFRP), by measuring variations on the surface roughness. Variable amplitude loads (VAL), which represent realistic loads during aeronautical missions of fighter aircraft (FALSTAFF) have been applied to coupons until failure. Stiffness degradation and surface roughness variations have been measured during the life of the coupons obtaining a Pearson correlation of 0.

Electronic speckle pattern interferometry using vortex beams.

We show that it is possible to perform electronic speckle pattern interferometry (ESPI) using, for the first time to our knowledge, vortex beams as the reference beam. The technique we propose is easy to implement, and the advantages obtained are, among others, environmental stability, lower processing time, and the possibility to switch between traditional ESPI and spiral ESPI. The experimental results clearly show the advantages of using the proposed technique for deformation studies of complex structures.

A comprehensive approach to deal with instrumental optical aberrations effects in high-accuracy photon's orbital angular momentum spectrum measurements.

With the current and upcoming applications of beams carrying orbital angular momentum (OAM), there will be the need to generate beams and measure their OAM spectrum with high accuracy. The instrumental OAM spectrum distortion is connected to the effect of its optical aberrations on the OAM content of the beams that the instrument creates or measures. Until now, the effect of the well-known Zernike aberrations has been studied partially, assuming vortex beams with trivial radial phase components.

Optical inspection of liquid crystal variable retarder inhomogeneities.

Liquid crystal variable retarders (LCVRs) are starting to be widely used in optical systems because of their capacity to provide a controlled variable optical retardance between two orthogonal components of incident polarized light or to introduce a known phase shifting (PS) between coherent waves, both by means of an applied voltage. Typically, the retardance or PS introduced by an LCVR is not homogeneous across the aperture. On the one hand, the LCVR glass substrates present a global bend that causes an overall variation of the retardance or PS.

A highly photoconductive poly(vinylcarbazole)/2,4,7-trinitro-9-fluorenone Sol-Gel material that follows a classical charge-generation model.

Highly photoconductive properties are reported for organic-inorganic hybrid sol-gel thin film materials composed of a classical poly(vinylcarbazole)/2,4,7-trinitro-9-fluorenone (PVK/TNF) polymeric mixture, entrapped in a SiO(2) matrix, whose pores have been chemically modified by organic functional groups. The highest photosensitivity obtained, 3.4 x 10(-10) cm Omega(-1) W(-1) at E 22 V microm(-)1, at the optimum molar ratio between the active components, TNF, PVK, and SiO(2), is in the range of the highest values ever reported for any PVK/TNF-based classical photoconductive material.

Shrinkage control in a photopolymerizable hybrid solgel material for holographic recording.

We report the correction of the shrinkage observed during UV postrecording curing in a holographic solgel material that was recently achieved by the use of various chemical formulations for the composition of the hybrid supporting matrix. We found that a chemical modification of the matrix noticeably attenuates the shrinkage (from 1.3% to 0.