Aging Behavior of Water-Based YSZ Suspensions for Plasma Spraying of Thermal Barrier Coatings.

Suspension stability is a key parameter that should be considered in any coating process utilizing a suspension as the main feedstock. Application of water as the liquid phase for suspension preparation is promising due to its availability, low cost and no toxicity. In the present study, the effects of three surfactants, polyethyleneimine (PEI), 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) and -Terpineol, on the functional stability of yttria-stabilized zirconia (YSZ) water-based suspensions were investigated.

Biomimetically Mineralized Alginate Nanocomposite Fibers for Bone Tissue Engineering: Mechanical Properties and in Vitro Cellular Interactions.

We report herein the structural and mechanical properties and in vitro cellular response of hydroxyapatite (HAp)/alginate nanocomposite fibrous scaffolds mimicking the mineralized collagen fibrils of bone tissue. The biomimetically "" nanocomposites, fabricated by electrospinning and in situ synthesis strategy, were compared with pure alginate nanofibers and micrometer-level HAp/alginate composite fibers. The tensile strength and elastic modulus of the nanocomposites increased by 79.

Dimensional Changes of Yttria-stabilized Zirconia under Different Preparation Designs and Sintering Protocols.

Purpose: To evaluate the linear and volumetric dimensional changes that occur throughout the fabrication process of monolithic 4.5-6% yttria-stabilized zirconia copings under the influence of different preparation designs and two sintering protocols.

Materials And Methods: A titanium master die was fabricated using Atlantis core file implant-abutment.

Experimental composites of polyacrilonitrile-electrospun nanofibers containing nanocrystal cellulose.

Objective: To test the effects of addition of polyacrilonitrile (PAN) nanofibers and nanocrystal cellulose (NCC)-containing PAN nanofibers on flexural properties of experimental dental composites.

Methods: 11wt% PAN in dimethylformamide (DMF) solution was electrospun at 17.2kVA and 20cm from the collector drum.

The influence of altering sintering protocols on the optical and mechanical properties of zirconia: A review.

Objective: As a result of advancements in chairside technology and speed sintering techniques and increased esthetic demands of patients, efforts have been made to produce monolithic zirconia restorations that are highly translucent, strong, and dense. While methods for processing zirconia are well known, there is a tendency to modify the process parameters with the aim of decreasing the overall processing time and, in particular, the sintering time. This review provides clinicians with scientific evidence of the effects of altering sintering parameters used for dental zirconia on its microstructure, phase transformation, and mechanical and optical properties.

Marginal Discrepancies of Monolithic Zirconia Crowns: The Influence of Preparation Designs and Sintering Techniques.

Purpose: The marginal fit is an essential component for the clinical success of prosthodontic restorations. The aim of this study was to investigate the influence of different abutment finish line widths and crown thicknesses on the marginal fit of zirconia crowns fabricated using either standard or fast sintering protocols.

Materials And Methods: Six titanium abutments were fabricated for receiving zirconia molar crowns.

Osteogenic and anti-osteoporotic effects of risedronate-added calcium phosphate silicate cement.

Osteoporosis greatly impairs bone fracture restoration with bone cement because the accelerated resorption decreases the osseointegration between bone and implants. In this study, we designed a new drug delivery system based on the third generation bisphosphonate risedronate (RA) and the osteogenic calcium phosphate silicate cement (CPSC). The impact of RA on CPSC's material properties and microstructure was evaluated by different characterization methods (μCT, XRD, FTIR, SEM and gas sorption).

Fabrication and characterization of a novel carbon fiber-reinforced calcium phosphate silicate bone cement with potential osteo-inductivity.

The repair of bone defects is still a pressing challenge in clinics. Injectable bone cement is regarded as a promising material to solve this problem because of its special self-setting property. Unfortunately, its poor mechanical conformability, unfavorable osteo-genesis ability and insufficient osteo-inductivity seriously limit its clinical application.

A Comprehensive Study of Osteogenic Calcium Phosphate Silicate Cement: Material Characterization and In Vitro/In Vivo Testing.

Vertebral compression fractures can be successfully restored by injectable bone cements. Here the as-yet unexplored in vitro cytotoxicity, in vivo biodegradation, and osteoconductivity of a new calcium phosphate silicate cements (CPSC) are studied, where monocalcium phosphate (MCP; 5, 10, and 15 wt%) is added to calcium silicate cement (CSC). Setting rate and compressive strength of CPSC decrease with the addition of MCP.

Preparation, characterization, release kinetics, and in vitro cytotoxicity of calcium silicate cement as a risedronate delivery system.

Injectable bone cements have been well characterized and studied in non-load bearing bone fixation and bone screw augmentation applications. Current calcium phosphate cement or poly(methyl methacrylate) cement have drawbacks like low mechanical strength and in situ exothermic properties. This leads especially in patients with osteoporosis to worsening contact between implant and bone and can finally lead to implant failure.

Novel biomimetic hydroxyapatite/alginate nanocomposite fibrous scaffolds for bone tissue regeneration.

Hydroxyapatite/alginate nanocomposite fibrous scaffolds were fabricated via electrospinning and a novel in situ synthesis of hydroxyapatite (HAp) that mimics mineralized collagen fibrils in bone tissue. Poorly crystalline HAp nanocrystals, as confirmed by X-ray diffractometer peak approximately at 2θ = 32° and Fourier transform infrared spectroscopy spectrum with double split bands of PO4(v 4) at 564 and 602 cm(-1), were induced to nucleate and grow at the [-COO(-)]-Ca(2+)-[-COO(-)] linkage sites on electrospun alginate nanofibers impregnated with PO4 (3-) ions. This novel process resulted in a uniform deposition of HAp nanocrystals on the nanofibers, overcoming the severe agglomeration of HAp nanoparticles processed by the conventional mechanical blending/electrospinning method.

Bio-inspired dicalcium phosphate anhydrate/poly(lactic acid) nanocomposite fibrous scaffolds for hard tissue regeneration: in situ synthesis and electrospinning.

The fundamental building blocks of hierarchically structured bone tissue are mineralized collagen fibrils with calcium phosphate nanocrystals that are biologically "engineered" through biomineralization. In this study, we demonstrate an original invention of dicalcium phosphate anhydrate (DCPA)/poly(lactic acid) (PLA) composite nanofibers, which mimics the mineralized collagen fibrils via biomimetic in situ synthesis and electrospinning for hard tissue regenerative medicines. The interaction of the Ca(2+) ions and the carbonyl groups in the PLA provides nucleation sites for DCPA during the in situ synthesis process.

In vitro studies of calcium phosphate silicate bone cements.

A novel calcium phosphate silicate bone cement (CPSC) was synthesized in a process, in which nanocomposite forms in situ between calcium silicate hydrate (C-S-H) gel and hydroxyapatite (HAP). The cement powder consists of tricalcium silicate (C(3)S) and calcium phosphate monobasic (CPM). During cement setting, C(3)S hydrates to produce C-S-H and calcium hydroxide (CH); CPM reacts with the CH to precipitate HAP in situ within C-S-H.

Oxidation of gas phase trichloroethylene and toluene using composite sol-gel TiO2 photocatalytic coatings.

The previously developed composite sol-gel (CSG) process is proposed for the deposition of thick (10-50 microm) porous films of photocatalytic TiO2. The CSG titania was developed by binding pre-calcined TiO2 particles with TiO2 sol. It had relatively high surface area (15-35 m2/g) and good resistance against mechanical stress and abrasion.

In-situ preparation of poly(propylene fumarate)--hydroxyapatite composite.

In-situ precipitation of hydroxyapatite (HAp) in the presence of poly(propylene fumarate) (PPF) is investigated. Amorphous calcium phosphate (ACP) precipitates in the presence of the polymer and remains in the amorphous form for a relatively long time, e.g.

Influence of apatite seeds on the synthesis of calcium phosphate cement.

This preliminary study explores the seeding effect (using crystalline hydroxyapatite particles) on the setting time, compressive strength, phase evolution, and microstructure of calcium phosphate cements (CPC) based on monocalcium phosphate monohydrate and calcium hydroxide. Experimental results showed that the setting time varies from 5 to about 30 min, as the seed concentration increased from 0 to 20 wt%. The compressive strength of CPC increased from 4 to 17 MPa, followed by decrease to 12 MPa, for the same range of seeds content.

Structural evolution of sol-gel-derived hydroxyapatite.

Structural evolution upon transformation of sol to gel, and gel to final ceramic during the synthesis of hydroxyapatite is investigated using Fourier transform infrared (FTIR) analysis, X-ray diffraction (XRD), thermal behavior (DTA and TGA), and electron microscopy examination (SEM/TEM). The sol was first thermally aged at 45 C for various time periods up to 120 min. The colloidal sol, which may have an oligomeric structure, was relatively stable against coagulation.

Sol-gel hydroxyapatite coatings on stainless steel substrates.

Thin film hydroxyapatite deposits onto sandblasted 316L stainless steel substrates were prepared using water-based sol-gel technique recently developed in our lab. The coatings were annealed in air at 375 degrees C, 400 degrees C, and 500 degrees C. Phase formation, surface morphology, interfacial microstructure, and interfacial bonding strength of the coatings were investigated.