Novel Sol-Gel Synthesis Route for Ce- and V-Doped BaCaTiZrO Piezoceramics.

To meet the current demand for lead-free piezoelectric ceramics, a novel sol-gel synthesis route is presented for the preparation of BaCaTiZrO doped with cerium (Ce = 0, 0.01, and 0.02 mol%) and vanadium (V = 0, 0.

Schwann Cells Do Not Promote Myogenic Differentiation in the EPI Loop Model.

In skeletal muscle tissue engineering, innervation and vascularization play an essential role in the establishment of functional skeletal muscle. For adequate three-dimensional assembly, biocompatible aligned nanofibers are beneficial as matrices for cell seeding. The aim of this study was to analyze the impact of Schwann cells (SC) on myoblast (Mb) and adipogenic mesenchymal stromal cell (ADSC) cocultures on poly-ɛ-caprolactone (PCL)-collagen I-nanofibers .

Energy-Reduced Fabrication of Light-Frame Ceramic Honeycombs by Replication of Additive Manufactured Templates.

Ceramic components require very high energy consumption due to synthesis, shaping, and thermal treatment. However, this study suggests that combining the sol-gel process, replica technology, and stereolithography has the potential to produce highly complex geometries with energy savings in each process step. We fabricated light-frame honeycombs of AlO, BaCaZrTiO (BCZT), and BaTiO (BT) using 3D-printed templates with varying structural angles between -30° and 30° and investigated their mechanical and piezoelectric properties.

Improved Mechanical Amplification of Monolithic PZT and PZT Composite via Optimized Honeycomb Macrostructures.

Honeycomb-based, modular composites with a relative density of 0.3948 and a slenderness ratio of 6.48 were fabricated on PZT building blocks connected with a PZT-filled phenyl silicone resin.

Advanced Estimation of Compressive Strength and Fracture Behavior in Ceramic Honeycombs by Polarimetry Measurements of Similar Epoxy Resin Honeycombs.

Finding a non-destructive characterization method for cellular ceramics' compressive strength and fracture behavior has been a challenge for material scientists for years. However, for transparent materials, internal stresses can be determined by the non-destructive photoelastic measurements. We propose a novel approach to correlate the photoelastic stresses of polymer (epoxy resin) prototypes with the mechanical properties of ceramics (alumina).

Microsurgical Transplantation of Pedicled Muscles in an Isolation Chamber-A Novel Approach to Engineering Muscle Constructs via Perfusion-Decellularization.

Decellularized whole muscle constructs represent an ideal scaffold for muscle tissue engineering means as they retain the network and proteins of the extracellular matrix of skeletal muscle tissue. The presence of a vascular pedicle enables a more efficient perfusion-based decellularization protocol and allows for subsequent recellularization and transplantation of the muscle construct in vivo. The goal of this study was to create a baseline for transplantation of decellularized whole muscle constructs by establishing an animal model for investigating a complete native muscle isolated on its pedicle in terms of vascularization and functionality.

Free Transplantation of a Tissue Engineered Bone Graft into an Irradiated, Critical-Size Femoral Defect in Rats.

Healing of large bone defects remains a challenge in reconstructive surgery, especially with impaired healing potential due to severe trauma, infection or irradiation. In vivo studies are often performed in healthy animals, which might not accurately reflect the situation in clinical cases. In the present study, we successfully combined a critical-sized femoral defect model with an ionizing radiation protocol in rats.

Porous Alumina Ceramics with Multimodal Pore Size Distributions.

Pore networks with multimodal pore size distributions combining advantages from isotropic and anisotropic shaped pores of different sizes are highly attractive to optimize the physical properties of porous ceramics. Multimodal porous AlO ceramics were manufactured using pyrolyzed cellulose fibers (l = 150 µm, d = 8 µm) and two types of isotropic phenolic resin spheres (d = 30 and 300 µm) as sacrificial templates. The sacrificial templates were homogeneously distributed in the AlO matrix, compacted by uniaxial pressing and extracted by a burnout and sintering process up to 1700 °C in air.

Enhanced vascularization andtissue formation in hydrogels made of engineered RGD-tagged spider silk proteins in the arteriovenous loop model.

Due to its low immunogenic potential and the possibility to fine-tune their properties, materials made of recombinant engineered spider silks are promising candidates for tissue engineering applications. However, vascularization of silk-based scaffolds is one critical step for the generation of bioartificial tissues and consequently for clinical application. To circumvent insufficient vascularization, the surgically induced angiogenesis by means of arteriovenous loops (AVL) represents a highly effective methodology.

Open-Cellular Alumina Foams with Hierarchical Strut Porosity by Ice Templating: A Thickening Agent Study.

Alumina replica foams were manufactured by the Schwartzwalder sponge replication technique and were provided with an additional strut porosity by a freeze-drying/ice-templating step prior to thermal processing. A variety of thickeners in combination with different alumina solid loads in the dispersion used for polyurethane foam template coating were studied. An additional strut porosity as generated by freeze-drying was found to be in the order of ~20%, and the spacings between the strut pores generated by ice-templating were in the range between 20 µm and 32 µm.

Hierarchical Surface Texturing of Hydroxyapatite Ceramics: Influence on the Adhesive Bonding Strength of Polymeric Polycaprolactone.

The tailored manipulation of ceramic surfaces gained recent interest to optimize the performance and lifetime of composite materials used as implants. In this work, a hierarchical surface texturing of hydroxyapatite (HAp) ceramics was developed to improve the poor adhesive bonding strength in hydroxyapatite and polycaprolactone (HAp/PCL) composites. Four different types of periodic surface morphologies (grooves, cylindric pits, linear waves and Gaussian hills) were realized by a ceramic micro-transfer molding technique in the submillimeter range.

Human Umbilical Vein Endothelial Cell Support Bone Formation of Adipose-Derived Stem Cell-Loaded and 3D-Printed Osteogenic Matrices in the Arteriovenous Loop Model.

For the regeneration of large volume tissue defects, the interaction between angiogenesis and osteogenesis is a crucial prerequisite. The surgically induced angiogenesis by means of an arteriovenous loop (AVL), is a powerful methodology to enhance vascularization of osteogenic matrices. Moreover, the AVL increases oxygen and nutrition supply, thereby supporting cell survival as well as tissue formation.

Injection Molding of 3-3 Hydroxyapatite Composites.

The manufacturing of ideal implants requires fabrication processes enabling an adjustment of the shape, porosity and pore sizes to the patient-specific defect. To meet these criteria novel porous hydroxyapatite (HAp) implants were manufactured by combining ceramic injection molding (CIM) with sacrificial templating. Varied amounts (Φ = 0-40 Vol%) of spherical pore formers with a size of 20 µm were added to a HAp-feedstock to generate well-defined porosities of 11.

Phase Evolution, Filler-Matrix Interactions, and Piezoelectric Properties in Lead Zirconate Titanate (PZT)-Filled Polymer-Derived Ceramics (PDCs).

PZT-silsesquioxane-based 0-3 hybrid materials are prepared by mixing lead zirconate titanate (Pb(Zr,Ti)O; PZT) powder with a [R-SiO] (R = H, CH, CH=CH, CH) silsequioxane preceramic polymer. A PZT load up to 55 vol.% can be reached in the final composite.

Vegetable hierarchical structures as template for bone regeneration: New bio-ceramization process for the development of a bone scaffold applied to an experimental sheep model.

Long bone defects still represent a major clinical challenge in orthopedics, with the inherent loss of function considerably impairing the quality of life of the affected patients. Thus, the purpose of this study was to assess the safety and potential of bone regeneration offered by a load-bearing scaffold characterized by unique hierarchical architecture and high strength, with active surface facilitating new bone penetration and osseointegration in critical size bone defects. The results of this study showed the potential of bio-ceramization processes applied to vegetable hierarchical structures for the production of new wood-derived bone scaffolds, further improved by surface functionalization, with good biological and mechanical properties leading to successful treatment of critical size bone defects in the sheep model.

Intrinsic Vascularization of Recombinant eADF4(C16) Spider Silk Matrices in the Arteriovenous Loop Model.

The surgically induced angiogenesis by means of arteriovenous (AV) loops represents a powerful method to significantly enhance vascularization of biomaterials. Regarding tissue engineering applications, spider silk is a promising biomaterial with a good biocompatibility and slow biodegradation. This study aims at investigating vascularization as well as tissue formation of fibrous matrices made of electro-spun (ES) or wet-spun (WS) engineered ADF4(C16) spider silks in the rat AV loop model.

Modular Lattice Constructs for Biological Joint Resurfacing.

The repair of large articular cartilage lesions is still a major challenge. In particular, the fixation of the grafts to the subchondral bone plate represents an unresolved problem. In this work, we present a completely novel concept based on a modular lattice, combining building blocks of different ceramic materials, anchoring pins and space for cell-loaded hydrogels or other scaffold materials.

Modular ceramic scaffolds for individual implants.

Ideal artificial bone grafts aim for multiscale porosity, high mechanical strength and ensure rapid vascularization for bone ingrowth. In this work modular ceramic arteriovenous loops (AV-loops) with a hierarchical porosity approach were designed and manufactured to meet these criteria and to exceed the poor mechanical strength of monolithic scaffolds. Bioactive building blocks (β-TCP, HAp, BCP) with dimensions of 1.

Encapsulation of Mesenchymal Stem Cells Improves Vascularization of Alginate-Based Scaffolds.

Vascularization of bioartificial tissues can be significantly enhanced by the generation of an arteriovenous (AV) loop. Besides the surgical vascularization, the choice of the scaffold and the applied cells are indispensable cofactors. The combination of alginate dialdehyde and gelatin (ADA-GEL) and mesenchymal stem cells (MSCs) is a promising approach with regard to biocompatibility, biodegradation, as well as de novo tissue formation.

Dextran-coated superparamagnetic iron oxide nanoparticles for magnetic resonance imaging: evaluation of size-dependent imaging properties, storage stability and safety.

Background: Rising criticism of currently available contrast agents for magnetic resonance imaging, either due to their side effects or limited possibilities in terms of functional imaging, evoked the need for safer and more versatile agents. We previously demonstrated the suitability of novel dextran-coated superparamagnetic iron oxide nanoparticles (SPION) for biomedical applications in terms of safety and biocompatibility.

Methods: In the present study, we investigated the size-dependent cross-linking process of these particles as well as the size dependency of their imaging properties.

Vacuum-Induced Surface Freezing to Produce Monoliths of Aligned Porous Alumina.

Vacuum-induced surface freezing has been used to produce uni-directional freezing of colloidal aluminum oxide dispersions. It leads to zones of different structure within the resulting sintered monoliths that are highly similar to those known for freeze casting using a cryogen cold source. A more-or-less dense surface layer and a cellular sub-surface region are formed, beneath which is a middle region of aligned lamellae and pores that stretches through most of the depth of the monolith.

Tortuosity of Aligned Channels in Alumina Membranes Produced by Vacuum-Induced Surface Directional Freezing.

Vacuum-induced surface freezing of colloidal alumina was used to produce membranes that have elongated, aligned channels and, hence, are tortuous in the direction perpendicular to ice crystal growth. The effective tortuosity of the membranes was measured by steady-state diffusion of a solute, methylene blue. The resulting diffusion profiles show an initial step-increase in amount of dye reaching the acceptor that is caused by capillarity drawing the donor solution through any non-wetted channels in the membrane.

Influence of Different Irradiation Protocols on Vascularization and Bone Formation Parameters in Rat Femora.

Aim of the present study was the establishment of an efficient and reproducible model for irradiation of rat femora as a model for impaired osteogenesis and angiogenesis. Four different irradiation protocols were compared: single irradiation of the left femur with 20 Gy and explantation after 4 or 8 weeks (group A, B) and three irradiation fractions at 3-4 days intervals with 10 Gy and explantation after 4 or 8 weeks (group C, D). The contralateral, unirradiated femur served as control.

Enhancement of the antimicrobial properties of orthorhombic molybdenum trioxide by thermal induced fracturing of the hydrates.

The oxides of the transition metal molybdenum exhibit excellent antimicrobial properties. We present the preparation of molybdenum trioxide dihydrate (MoO3 × 2H2O) by an acidification method and demonstrate the thermal phase development and morphological evolution during and after calcination from 25 °C to 600 °C. The thermal dehydration of the material was found to proceed in two steps.

Freeze gelated porous membranes for periodontal tissue regeneration.

Guided tissue regeneration (GTR) membranes have been used for the management of destructive forms of periodontal disease as a means of aiding regeneration of lost supporting tissues, including the alveolar bone, cementum, gingiva and periodontal ligaments (PDL). Currently available GTR membranes are either non-biodegradable, requiring a second surgery for removal, or biodegradable. The mechanical and biofunctional limitations of currently available membranes result in a limited and unpredictable treatment outcome in terms of periodontal tissue regeneration.