Constructing Quasi-Localized High-Concentration Solvation Structures to Stabilize Battery Interfaces in Nonflammable Phosphate-Based Electrolyte.

Flame-retardant phosphate-based electrolytes effectively enhance lithium-ion battery safety but suffer from poor compatibility with graphite anodes and high-voltage cathodes, hindering scalability. Fluorinated phosphates, though widely used, increase interfacial resistance at the anode, degrading performance. In this work, carbonate solvents with strong polarity are introduced to prevent tris(2,2,2-trifluoroethyl) phosphate (TFEP) from participating in the solvation structure of lithium ions.

Resolving optimal ionomer interaction in fuel cell electrodes via operando X-ray absorption spectroscopy.

To bridge the gap between oxygen reduction electrocatalysts development and their implementation in real proton exchange membrane fuel cell electrodes, an important aspect to be understood is the interaction between the carbon support, the active sites, and the proton conductive ionomer as it greatly affects the local transportations to the catalyst surface. Here we show that three Pt/C catalysts, synthesized using the polyol method with different carbon supports (low surface area Vulcan, high surface area Ketjenblack, and biomass-derived highly ordered mesoporous carbon), revealed significant variations in ionomer-catalyst interactions. The Pt/C catalysts supported on ordered mesoporous carbon derived from biomass showed the best performance under the gas diffusion electrode configuration.

Electrochemical Nitrogen Reduction: The Energetic Distance to Lithium.

Energy-efficient electrochemical reduction of nitrogen to ammonia could help in mitigating climate change. Today, only Li- and recently Ca-mediated systems can perform the reaction. These materials have a large intrinsic energy loss due to the need to electroplate the metal.

Locally Enhanced Flow and Electric Fields Through a Tip Effect for Efficient Flow-Electrode Capacitive Deionization.

Low-electrode capacitive deionization (FCDI) is an emerging desalination technology with great potential for removal and/or recycling ions from a range of waters. However, it still suffers from inefficient charge transfer and ion transport kinetics due to weak turbulence and low electric intensity in flow electrodes, both restricted by the current collectors. Herein, a new tip-array current collector (designated as T-CC) was developed to replace the conventional planar current collectors, which intensifies both the charge transfer and ion transport significantly.

An alternative to petrochemicals: biomass electrovalorization.

Replacing petrochemicals with refined waste biomass as a sustainable chemical source has become an attractive option to lower global carbon emissions. Popular methods of refining lignocellulosic waste biomass use thermochemical processes, which have significant environmental downsides. Using electrochemistry instead would overcome many of these downsides, directly driving chemical reactions with renewable electricity and revolutionizing the way many chemicals are produced today.

Fe dissolution in Fe-N-C electrocatalysts during acidic oxygen reduction: impact of local pH change.

Atomic Fe in N-doped C (Fe-N-C) catalysts provide the most promising non-precious metal O reduction activity at the cathodes of proton exchange membrane fuel cells. However, one of the biggest remaining challenges to address towards their implementation in fuel cells is their limited durability. Fe demetallation has been suggested as the primary initial degradation mechanism.

Development of a new class of stable and adaptable free-standing fibre mats with high room-temperature hydroxide-ion conductivity.

For alkaline anion-exchange membrane electrolysers and fuel cells to become a technological reality, hydroxide-ion (OH) conducting membranes that are flexible, robust, affording high OH conductivity, and synthesised in a low-cost and scalable way must be developed. In this paper, we engineer a stable, self-supporting, and flexible fibre mat using a low-cost ZIF-8 metal-organic framework composited with ionic liquid tetrabutylammonium hydroxide and widely used polyacrylonitrile as polymeric backbone. We obtain mats with a high intrinsic OH conductivity for a metal-organic framework-based material already at room temperature, without added ion-conductor polymers.

Rational Design of Enzymatic Electrodes: Impact of Carbon Nanomaterial Types on the Electrode Performance.

This research focuses on the rational design of porous enzymatic electrodes, using horseradish peroxidase (HRP) as a model biocatalyst. Our goal was to identify the main obstacles to maximizing biocatalyst utilization within complex porous structures and to assess the impact of various carbon nanomaterials on electrode performance. We evaluated as-synthesized carbon nanomaterials, such as Carbon Aerogel, Coral Carbon, and Carbon Hollow Spheres, against the commercially available Vulcan XC72 carbon nanomaterial.

Poly(ionic liquid) Ionomers Help Prevent Active Site Aggregation, in Single-Site Oxygen Reduction Catalysts.

Anion exchange membrane fuel cells (AEMFCs) can produce clean electricity without the need for platinum-group metals at the cathode. To improve their durability and performance, most research investigations so far have focused on optimizing the catalyst and anion exchange membrane, while few studies have been dedicated to the effect of the ionomer. Herein, we address this gap by developing a poly(ionic liquid)-based ionomer and studying its effect on oxygen transport and oxygen reduction kinetics, in comparison to the commercial proton exchange and anion exchange ionomers Nafion and Fumion.

Towards Negative Emissions: Hydrothermal Carbonization of Biomass for Sustainable Carbon Materials.

The contemporary production of carbon materials heavily relies on fossil fuels, contributing significantly to the greenhouse effect. Biomass is a carbon-neutral resource whose organic carbon is formed from atmospheric CO. Employing biomass as a precursor for synthetic carbon materials can fix atmospheric CO into solid materials, achieving negative carbon emissions.

Large electronegativity differences between adjacent atomic sites activate and stabilize ZnInS for efficient photocatalytic overall water splitting.

Photocatalytic overall water splitting into hydrogen and oxygen is desirable for long-term renewable, sustainable and clean fuel production on earth. Metal sulfides are considered as ideal hydrogen-evolved photocatalysts, but their component homogeneity and typical sulfur instability cause an inert oxygen production, which remains a huge obstacle to overall water-splitting. Here, a distortion-evoked cation-site oxygen doping of ZnInS (D-O-ZIS) creates significant electronegativity differences between adjacent atomic sites, with S sites being electron-rich and S sites being electron-deficient in the local structure of S-S-O sites.

Lignin-Derived Mesoporous Carbon for Sodium-Ion Batteries: Block Copolymer Soft Templating and Carbon Microstructure Analysis.

The demand for versatile and sustainable energy materials is on the rise, given the importance of developing novel clean technologies for transition to a net zero economy. Here, we present the synthesis, characterization, and application of lignin-derived ordered mesoporous carbons with various pore sizes (from 5 to approximately 50 nm) as anodes in sodium-ion batteries. We have varied the pore size using self-synthesized PEO--PHA block copolymers with different PEO and PHA chain lengths, applying the "soft templating" approach to introduce isolated spherical pores of 20 to 50 nm in diameters.

Strain induced electrochemical behaviors of ionic liquid electrolytes in an electrochemical double layer capacitor: Insights from molecular dynamics simulations.

Electrochemical Double Layer Capacitors (EDLCs) with ionic liquid electrolytes outperform conventional ones using aqueous and organic electrolytes in energy density and safety. However, understanding the electrochemical behaviors of ionic liquid electrolytes under compressive/tensile strain is essential for the design of flexible EDLCs as well as normal EDLCs, which are subject to external forces during assembly. Despite many experimental studies, the compression/stretching effects on the performance of ionic liquid EDLCs remain inconclusive and controversial.

Evaluation of the Char Formation During the Hydrothermal Treatment of Wooden Balls.

With wooden balls, a visualization of the hydrothermal carbonization to show the progress of the conversion to char is presented. In the present study, the balls represent the particles of biomass to investigate the differences in conversion outside and inside of biomass particles, during hydrothermal carbonization. A special focus is on hydrochar and pyrochar formation.

Searching for the Rules of Electrochemical Nitrogen Fixation.

Li-mediated ammonia synthesis is, thus far, the only electrochemical method for heterogeneous decentralized ammonia production. The unique selectivity of the solid electrode provides an alternative to one of the largest heterogeneous thermal catalytic processes. However, it is burdened with intrinsic energy losses, operating at a Li plating potential.

Atomic metal coordinated to nitrogen-doped carbon electrocatalysts for proton exchange membrane fuel cells: a perspective on progress, pitfalls and prospectives.

Proton exchange membrane fuel cells require reduced construction costs to improve commercial viability, which can be fueled by elimination of platinum as the O reduction electrocatalyst. The past 10 years has seen significant developments in synthesis, characterisation, and electrocatalytic performance of the most promising alternative electrocatalyst; single metal atoms coordinated to nitrogen-doped carbon (M-N-C). In this Perspective we recap some of the important achievements of M-N-Cs in the last decade, as well as discussing current knowledge gaps and future research directions for the community.

In-Situ-Grown Cu Dendrites Plasmonically Enhance Electrocatalytic Hydrogen Evolution on Facet-Engineered Cu O.

Herein, facet-engineered Cu O nanostructures are synthesized by wet chemical methods for electrocatalytic HER, and it is found that the octahedral Cu O nanostructures with exposed crystal planes of (111) (O-Cu O) has the best hydrogen evolution performance. Operando Raman spectroscopy and ex-situ characterization techniques showed that Cu O is reduced during HER, in which Cu dendrites are grown on the surface of the Cu O nanostructures, resulting in the better HER performance of O-Cu O after HER (O-Cu O-A) compared with that of the as-prepared O-Cu O. Under illumination, the onset potential of O-Cu O-A is ca.

Investigating the Superior Performance of Hard Carbon Anodes in Sodium-Ion Compared With Lithium- and Potassium-Ion Batteries.

Emerging sodium-ion batteries (NIBs) and potassium-ion batteries (KIBs) show promise in complementing lithium-ion battery (LIB) technology and diversifying the battery market. Hard carbon is a potential anode candidate for LIBs, NIBs, and KIBs due to its high capacity, sustainability, wide availability, and stable physicochemical properties. Herein, a series of hard carbons is synthesized by hydrothermal carbonization and subsequent pyrolysis at different temperatures to finely tune their structural properties.

Pyridine Functionalized Carbon Nanotubes: Unveiling the Role of External Pyridinic Nitrogen Sites for Oxygen Reduction Reaction.

Pyridinic nitrogen has been recognized as the primary active site in nitrogen-doped carbon electrocatalysts for the oxygen reduction reaction (ORR), which is a critical process in many renewable energy devices. However, the preparation of nitrogen-doped carbon catalysts comprised of exclusively pyridinic nitrogen remains challenging, as well as understanding the precise ORR mechanisms on the catalyst. Herein, a novel process is developed using pyridyne reactive intermediates to functionalize carbon nanotubes (CNTs) exclusively with pyridine rings for ORR electrocatalysis.

The role of ion solvation in lithium mediated nitrogen reduction.

Since its verification in 2019, there have been numerous high-profile papers reporting improved efficiency of lithium-mediated electrochemical nitrogen reduction to make ammonia. However, the literature lacks any coherent investigation systematically linking bulk electrolyte properties to electrochemical performance and Solid Electrolyte Interphase (SEI) properties. In this study, we discover that the salt concentration has a remarkable effect on electrolyte stability: at concentrations of 0.

Correction: The role of ion solvation in lithium mediated nitrogen reduction.

[This corrects the article DOI: 10.1039/D2TA07686A.].

Near ambient N fixation on solid electrodes versus enzymes and homogeneous catalysts.

The Mo/Fe nitrogenase enzyme is unique in its ability to efficiently reduce dinitrogen to ammonia at atmospheric pressures and room temperature. Should an artificial electrolytic device achieve the same feat, it would revolutionize fertilizer production and even provide an energy-dense, truly carbon-free fuel. This Review provides a coherent comparison of recent progress made in dinitrogen fixation on solid electrodes, homogeneous catalysts and nitrogenases.