Mapping nanoscale carrier confinement in polycrystalline graphene by terahertz spectroscopy.

Terahertz time-domain spectroscopy (THz-TDS) can be used to map spatial variations in electrical properties such as sheet conductivity, carrier density, and carrier mobility in graphene. Here, we consider wafer-scale graphene grown on germanium by chemical vapor deposition with non-uniformities and small domains due to reconstructions of the substrate during growth. The THz conductivity spectrum matches the predictions of the phenomenological Drude-Smith model for conductors with non-isotropic scattering caused by backscattering from boundaries and line defects.

Stacking and Twisting of Freestanding Complex Oxide Thin Films.

The integration of dissimilar materials in heterostructures has long been a cornerstone of modern materials science-seminal examples are 2D materials and van der Waals heterostructures. Recently, new methods have been developed that enable the realization of ultrathin freestanding oxide films approaching the 2D limit. Oxides offer new degrees of freedom, due to the strong electronic interactions, especially the 3d orbital electrons, which give rise to rich exotic phases.

Long-term stability and tree-ring oxidation of WSe using phase-contrast AFM.

In this work, we use atomic force microscopy (AFM) to investigate the long-term evolution of oxidative defects of tungsten diselenide (WSe) in ambient conditions over a period of 75 months, which is the longest such study performed on any layered material. In particular, we find that phase-imaging AFM of mechanically exfoliated WSe crystals provides convenient, direct identification of exposed and covered step-edges, and together with topographic thickness measurements allows complete determination of the layer arrangement in a multilayer flake. Step-edges with low or no phase-contrast consistently exhibit long-term stability in ambient conditions, indicating that they are covered and effectively protected by above-lying WSe layers.

Super-Resolution Nanolithography of Two-Dimensional Materials by Anisotropic Etching.

Nanostructuring allows altering of the electronic and photonic properties of two-dimensional (2D) materials. The efficiency, flexibility, and convenience of top-down lithography processes are, however, compromised by nanometer-scale edge roughness and resolution variability issues, which especially affect the performance of 2D materials. Here, we study how dry anisotropic etching of multilayer 2D materials with sulfur hexafluoride (SF) may overcome some of these issues, showing results for hexagonal boron nitride (hBN), tungsten disulfide (WS), tungsten diselenide (WSe), molybdenum disulfide (MoS), and molybdenum ditelluride (MoTe).

Selective area oxidation of copper derived from chemical vapor deposited graphene microstructure.

The barrier properties of graphene coating are highly correlated with its microstructure which is then determined by the chemical vapor deposition (CVD) growth history on metals. We demonstrate here an unrevealed selective area oxidation of copper under graphene, which is derived from the implicit-etching-controlled CVD growth mode of graphene. By charactering and analyzing the selective area patterns of Cu oxidation, an etched pattern trace with nano/microvoids during graphene growth has been proposed to account for this.

Graphene-Subgrain-Defined Oxidation of Copper.

The correlation between the crystal structure of chemical vapor deposition (CVD)-grown graphene and the crystal structure of the Cu growth substrate and their mutual effect on the oxidation of the underlying Cu are systematically explored. We report that natural oxygen or water intercalation along the graphene-Cu interface results in an orientation-dependent oxidation rate of the Cu surface, particularly noticeable for bicrystal graphene domains on the same copper grain, suggesting that the relative crystal orientation of subgrains determines the degree of Cu oxidation. Atomistic force field calculations support these observations, showing that graphene domains have preferential alignment with the Cu(111) with a smaller average height above the global Cu surface as compared to intermediate orientations, and that this is the origin of the heterogeneous oxidation rate of Cu.

A universal approach for the synthesis of two-dimensional binary compounds.

Only a few of the vast range of potential two-dimensional materials (2D) have been isolated or synthesised to date. Typically, 2D materials are discovered by mechanically exfoliating naturally occurring bulk crystals to produce atomically thin layers, after which a material-specific vapour synthesis method must be developed to grow interesting candidates in a scalable manner. Here we show a general approach for synthesising thin layers of two-dimensional binary compounds.

Lithographic band structure engineering of graphene.

Two-dimensional materials such as graphene allow direct access to the entirety of atoms constituting the crystal. While this makes shaping by lithography particularly attractive as a tool for band structure engineering through quantum confinement effects, edge disorder and contamination have so far limited progress towards experimental realization. Here, we define a superlattice in graphene encapsulated in hexagonal boron nitride, by etching an array of holes through the heterostructure with minimum feature sizes of 12-15 nm.

Graphene-Si CMOS oscillators.

Graphene field-effect transistors (GFETs) offer a possibility of exploiting unique physical properties of graphene in realizing novel electronic circuits. However, graphene circuits often lack the voltage swing and switchability of Si complementary metal-oxide-semiconductor (CMOS) circuits, which are the main building block of modern electronics. Here we introduce graphene in Si CMOS circuits to exploit favorable electronic properties of both technologies and realize a new class of simple oscillators using only a GFET, Si CMOS D latch, and timing RC circuit.

Oxidation of Suspended Graphene: Etch Dynamics and Stability Beyond 1000 °C.

We study the oxidation of clean suspended mono- and few-layer graphene in real time by in situ environmental transmission electron microscopy. At an oxygen pressure below 0.1 mbar, we observe anisotropic oxidation in which armchair-oriented hexagonal holes are formed with a sharp edge roughness below 1 nm.

Conductivity mapping of graphene on polymeric films by terahertz time-domain spectroscopy.

Fast inline characterization of the electrical properties of graphene on polymeric substrates is an essential requirement for quality control in industrial graphene production. Here we show that it is possible to measure the sheet conductivity of graphene on polymer films by terahertz time-domain spectroscopy (THz-TDS) when all internally reflected echoes in the substrate are taken into consideration. The conductivity measured by THz-TDS is comparable to values obtained from four point probe measurements.

A Graphene-Edge Ferroelectric Molecular Switch.

We show that polar molecules (water, ammonia, and nitrogen dioxide) adsorbed solely at the exposed edges of an encapsulated graphene sheet exhibit ferroelectricity, collectively orienting and switching reproducibly between two available states in response to an external electric field. This ferroelectric molecular switching introduces drastic modifications to the graphene bulk conductivity and produces a large and ambipolar charge bistability in micrometer-size graphene devices. This system comprises an experimental realization of envisioned memory capacitive ("memcapacitive") devices whose capacitance is a function of their charging history, here conceived via confined and correlated polar molecules at the one-dimensional edge of a two-dimensional crystal.

Quantitative optical mapping of two-dimensional materials.

The pace of two-dimensional materials (2DM) research has been greatly accelerated by the ability to identify exfoliated thicknesses down to a monolayer from their optical contrast. Since this process requires time-consuming and error-prone manual assignment to avoid false-positives from image features with similar contrast, efforts towards fast and reliable automated assignments schemes is essential. We show that by modelling the expected 2DM contrast in digitally captured images, we can automatically identify candidate regions of 2DM.

Conductance quantization suppression in the quantum Hall regime.

Conductance quantization is the quintessential feature of electronic transport in non-interacting mesoscopic systems. This phenomenon is observed in quasi one-dimensional conductors at zero magnetic field B, and the formation of edge states at finite magnetic fields results in wider conductance plateaus within the quantum Hall regime. Electrostatic interactions can change this picture qualitatively.

Probing the Gas-Phase Dynamics of Graphene Chemical Vapour Deposition using in-situ UV Absorption Spectroscopy.

The processes governing multilayer nucleation in the chemical vapour deposition (CVD) of graphene are important for obtaining high-quality monolayer sheets, but remain poorly understood. Here we show that higher-order carbon species in the gas-phase play a major role in multilayer nucleation, through the use of in-situ ultraviolet (UV) absorption spectroscopy. These species are the volatilized products of reactions between hydrogen and carbon contaminants that have backstreamed into the reaction chamber from downstream system components.

Differences in inflammation and acute phase response but similar genotoxicity in mice following pulmonary exposure to graphene oxide and reduced graphene oxide.

We investigated toxicity of 2-3 layered >1 μm sized graphene oxide (GO) and reduced graphene oxide (rGO) in mice following single intratracheal exposure with respect to pulmonary inflammation, acute phase response (biomarker for risk of cardiovascular disease) and genotoxicity. In addition, we assessed exposure levels of particulate matter emitted during production of graphene in a clean room and in a normal industrial environment using chemical vapour deposition. Toxicity was evaluated at day 1, 3, 28 and 90 days (18, 54 and 162 μg/mouse), except for GO exposed mice at day 28 and 90 where only the lowest dose was evaluated.

The hot pick-up technique for batch assembly of van der Waals heterostructures.

The assembly of individual two-dimensional materials into van der Waals heterostructures enables the construction of layered three-dimensional materials with desirable electronic and optical properties. A core problem in the fabrication of these structures is the formation of clean interfaces between the individual two-dimensional materials which would affect device performance. We present here a technique for the rapid batch fabrication of van der Waals heterostructures, demonstrated by the controlled production of 22 mono-, bi- and trilayer graphene stacks encapsulated in hexagonal boron nitride with close to 100% yield.

Graphene mobility mapping.

Carrier mobility and chemical doping level are essential figures of merit for graphene, and large-scale characterization of these properties and their uniformity is a prerequisite for commercialization of graphene for electronics and electrodes. However, existing mapping techniques cannot directly assess these vital parameters in a non-destructive way. By deconvoluting carrier mobility and density from non-contact terahertz spectroscopic measurements of conductance in graphene samples with terahertz-transparent backgates, we are able to present maps of the spatial variation of both quantities over large areas.

Defect/oxygen assisted direct write technique for nanopatterning graphene.

High resolution nanopatterning of graphene enables manipulation of electronic, optical and sensing properties of graphene. In this work we present a straightforward technique that does not require any lithographic mask to etch nanopatterns into graphene. The technique relies on the damaged graphene to be etched selectively in an oxygen rich environment with respect to non-damaged graphene.

Electrically continuous graphene from single crystal copper verified by terahertz conductance spectroscopy and micro four-point probe.

The electrical performance of graphene synthesized by chemical vapor deposition and transferred to insulating surfaces may be compromised by extended defects, including for instance grain boundaries, cracks, wrinkles, and tears. In this study, we experimentally investigate and compare the nano- and microscale electrical continuity of single layer graphene grown on centimeter-sized single crystal copper with that of previously studied graphene films, grown on commercially available copper foil, after transfer to SiO2 surfaces. The electrical continuity of the graphene films is analyzed using two noninvasive conductance characterization methods: ultrabroadband terahertz time-domain spectroscopy and micro four-point probe, which probe the electrical properties of the graphene film on different length scales, 100 nm and 10 μm, respectively.

Directed self-assembled crystalline oligomer domains on graphene and graphite.

We observe the formation of thin films of fibre-like aggregates from the prototypical organic semiconductor molecule para-hexaphenylene (p-6P) on graphite thin flakes and on monolayer graphene. Using atomic force microscopy, scanning electron microscopy, x-ray diffraction, polarized fluorescence microscopy, and bireflectance microscopy, the molecular orientations on the surface are deduced and correlated to both the morphology as well as to the high-symmetry directions of the graphitic surface: the molecules align with their long axis at ±11° with respect to a high-symmetry direction. The results show that the graphene surface can be used as a growth substrate to direct the self-assembly of organic molecular thin films and nanofibres, both with and without lithographical processing.

In situ TEM creation and electrical characterization of nanowire devices.

We demonstrate the observation and measurement of simple nanoscale devices over their complete lifecycle from creation to failure within a transmission electron microscope. Devices were formed by growing Si nanowires, using the vapor-liquid-solid method, to form bridges between Si cantilevers. We characterize the formation of the contact between the nanowire and the cantilever, showing that the nature of the connection depends on the flow of heat and electrical current during and after the moment of contact.

Customizable in situ TEM devices fabricated in freestanding membranes by focused ion beam milling.

Nano- and microelectromechanical structures for in situ operation in a transmission electron microscope (TEM) were fabricated with a turnaround time of 20 min and a resolution better than 100 nm. The structures are defined by focused ion beam (FIB) milling in 135 nm thin membranes of single crystalline silicon extending over the edge of a pre-fabricated silicon microchip. Four-terminal resistance measurements of FIB-defined nanowires showed at least two orders of magnitude increase in resistivity compared to bulk.