Author Correction: Biologically driven DOC release from peatlands during recovery from acidification.

The original version of this Article contained an error in the Acknowledgements, which incorrectly omitted from the end the following: 'In particular, we thank the staff of the Centre for Ecology and Hydrology (including A. Burden, N. Ostle and C.

Biologically driven DOC release from peatlands during recovery from acidification.

Peatlands store 1/3 of global soil carbon, destabilisation of which contributes much to the recent increase in DOC (dissolved organic carbon) in freshwater ecosystems. One suggested mechanism for the enhanced decomposition of peat and the releases of DOC is recovery from acidification. However, no biological role in the process has yet been identified.

Subtle shifts in microbial communities occur alongside the release of carbon induced by drought and rewetting in contrasting peatland ecosystems.

Peat represents a globally significant pool of sequestered carbon. However, peatland carbon stocks are highly threatened by anthropogenic climate change, including drought, which leads to a large release of carbon dioxide. Although the enzymatic mechanisms underlying drought-driven carbon release are well documented, the effect of drought on peatland microbial communities has been little studied.

Large-Scale Production of VO Cathode Materials Assisted by Thermal Gravimetric Analysis-Infrared Spectroscopy Technology.

The kilogram-scale fabrication of VO cathode materials has been notably assisted by in situ thermal gravimetric analysis (TGA)-infrared spectroscopy (IR) technology. This technology successfully identified a residue of ammonium metavanadate in commercial VO, which is consistent with the X-ray photoelectron spectroscopy result. Samples of VO materials have been fabricated and characterized by TGA-IR, scanning electron microscopy, and X-ray diffraction.

Heavy Rainfall Impacts on Trihalomethane Formation in Contrasting Northwestern European Potable Waters.

There is emerging concern over the impact of extreme events such as heavy rainfall on the quality of water entering the drinking water supply from aboveground sources, as such events are expected to increase in magnitude and frequency in response to climate change. We compared the impact of rainfall events on streamwater quality in four contrasting upland (peatland and mineral soil) and lowland agricultural catchments used to supply drinking water in France (Brittany) and the United Kingdom (North Wales) by analyzing water samples collected before, during, and after specific events. At all four streams, heavy rainfall led to a considerable rise in organic matter concentration ranging from 48 to 158%.

Reducing the cost of proton radiation therapy: the feasibility of a streamlined treatment technique for prostate cancer.

Proton radiation therapy is an effective modality for cancer treatments, but the cost of proton therapy is much higher compared to conventional radiotherapy and this presents a formidable barrier to most clinical practices that wish to offer proton therapy. Little attention in literature has been paid to the costs associated with collimators, range compensators and hypofractionation. The objective of this study was to evaluate the feasibility of cost-saving modifications to the present standard of care for proton treatments for prostate cancer.

A decision support system for drinking water production integrating health risks assessment.

The issue of drinking water quality compliance in small and medium scale water services is of paramount importance in relation to the 98/83/CE European Drinking Water Directive (DWD). Additionally, concerns are being expressed over the implementation of the DWD with respect to possible impacts on water quality from forecast changes in European climate with global warming and further anticipated reductions in north European acid emissions. Consequently, we have developed a decision support system (DSS) named ARTEM-WQ (AwaReness Tool for the Evaluation and Mitigation of drinking Water Quality issues resulting from environmental changes) to support decision making by small and medium plant operators and other water stakeholders.

Electroanalytical applications of boron-doped diamond microelectrode arrays.

The electrochemical characteristics of a novel all diamond fabricated boron-doped diamond microelectrode array (BDD-MEA) are critically appraised. The voltammetric response of simple electron transfer processes has been investigated and found to generate sigmoidal voltammetric curves. Furthermore, the device has been utilized for various analytical applications including, the direct detection of 4-nitrophenol over the concentration range 1.

Electrochemical study of oxaferrocene cryptands and their complexation with barium and sodium ions.

The electrochemical behaviour and cation recognition properties of two oxaferrocene cryptand ligands, 1,1'-[(1,4,10-trioxa-7,13-diazacyclopentadecane-7,13-diyl)diethoxy]-3,3',4,4'-tetraphenylferrocene and 1,1'-[(1,4,10,13-tetraoxa-7,16-diazacyclooctadecane-7,16-diyl)diethoxy]-3,3',4,4'-tetraphenylferrocene, have been characterized in acetonitrile in the presence of Ba(2+) and Na(+) by cyclic voltammetry, square wave voltammetry and a rotating disc electrode. The changes in the redox signals for the cryptates at varying concentrations of the target cations are used as a direct measure of the electronic coupling between the two units, leading to the conclusion that the cryptate formation process proceeds in multiple stages and the ligand offers several binding sites in the complex.

Derivatised carbon powder electrodes: reagentless pH sensors.

In this report, we derivatise carbon powder with anthracene, azobenzene, diphenylamine, 9,10-diphenylanthracene, methylene blue, 3-nitrofluoranthene, 6-nitrochrysene, 9-nitroanthracene, 9,10-phenanthraquinone (PAQ), thionin, and fast black K (2,5-dimethoxy-4-[(4-nitrophenyl)azo]benzenediazonium chloride) and separately immobilise the resulting material onto a bppg electrode. We use cyclic voltammetry (CV) to demonstrate that the observed voltammetric response for each derivatised carbon is consistent with that of an immobilised species. Further, we use CV and square wave voltammetry (SWV) to investigate the effect of pH on the peak potentials of each compound studied over the range pH 1-12 and at elevated temperatures up to 70 degrees C in order to demonstrate the versatility of derivatised carbon electrodes as reagentless pH sensors.

Anodic stripping voltammetry of sulphide at a nickel film: towards the development of a reagentless sensor.

The determination of sulphide at an electrochemically generated nickel oxide layer at glassy carbon and screen-printed electrodes in acidic media has been examined and appraised. The NiO layer was found to produce a stripping-like signal to sulphide and gave a linear peak current response from 20 to 90 muM. The response was further enhanced by repetitive cycling allowing accumulation of nickel sulphide at the electrode surface such that lower micromolar levels of sulphide (i.

Anthraquinone-derivatised carbon powder: reagentless voltammetric pH electrodes.

A simple pH probe is developed based upon the covalent chemical derivatisation of carbon particles with anthraquinone. The amperometric response of electrodes constructed from this material is examined and shown to produce a Nernstian linear response to pH from 1 to 9, over a range of temperatures from 20 to 70 degrees C, consistent with a two-electron, two-proton electrochemical process.

Voltammetric sizing of a sphere.

The size of a glass sphere positioned in the center of a microdisk electrode is determined by using a simple electrochemical procedure and is confirmed, additionally, by a microscopical measurement of the sphere at the time of the electrochemical measurement. The cyclic voltammetric response of the naked electrode and of the electrode with the sphere positioned in its center is recorded over a wide range of scan rates (0.002-1.

Electrochemical ESR and voltammetric studies of lithium ion pairing with electrogenerated 9,10-anthraquinone radical anions either free in acetonitrile solution or covalently bound to multiwalled carbon nanotubes.

The influence of lithium ion pairing on the voltammetric reduction of anthraquinone in acetonitrile is reported. On gold electrodes, the single electron reduction generates a radical anion which forms a complex with lithium cations from the electrolyte. In situ ESR studies support this finding, and signal intensity measurements are used to estimate a value for the complexation equilibrium constant.

Nano-electrochemical detection of hydrogen or protons using palladium nanoparticles: distinguishing surface and bulk hydrogen.

The benefits of using nanoparticle-modified electrodes are exemplified through the electrochemical detection of protons and/or hydrogen. It is shown that a palladium-nanoparticle-modified boron-doped diamond allows voltammetric information relating to the relative roles played by the surface and the bulk metal to be obtained for the proton-hydrogen system at palladium surfaces which is not accessible using palladium macroelectrodes or microelectrodes.

Mathematical modelling and simulation of adsorption processes at spherical microparticles.

A model for the adsorption process at spherical microparticles under transient diffusion conditions has been developed and solved using numerical simulation. This model allowed us to demonstrate that the system is controlled by two main dimensionless parameters: the adsorption rate constant ka' and the saturation parameter beta. Analytical models for the adsorption process at spherical microparticles under steady-state mass transport conditions have been derived.

The electroanalytical detection of hydrazine: a comparison of the use of palladium nanoparticles supported on boron-doped diamond and palladium plated BDD microdisc array.

We show that both a random distribution of palladium nanoparticles supported on a BDD electrode or a palladium plated BDD microelectrode array can each provide a sensing platform for the electrocatalytic detection of hydrazine. The palladium nanoparticle modified electrode displays a sensitivity and limit of detection of 60 mA mol(-1) L and 2.6 microM respectively while the array has a sensitivity of 8 mA mol(-1) L with a detection limit of 1.

Boron-doped diamond microdisc arrays: electrochemical characterisation and their use as a substrate for the production of microelectrode arrays of diverse metals (Ag, Au, Cu)via electrodeposition.

A novel boron-doped diamond (BDD) microelectrode array is characterised with electrochemical and atomic force microscopic techniques. The array consists of 40 micron-diameter sized BDD discs which are separated by 250 microns from their nearest neighbour in a hexagonal arrangement. The conducting discs can be electroplated to produce arrays of copper, silver or gold for analytical purposes in addition to operating as an array of BDD-microelectrodes.

4-Nitrobenzylamine partially intercalated into graphite powder and multiwalled carbon nanotubes: characterization using X-ray photoelectron spectroscopy and in situ atomic force microscopy.

We report the characterization of partial intercalation of 4-nitrobenzylamine (4-NBA) into edge-plane or edge-plane-like defect sites on the surface of both graphite powder and "bamboo-like" multiwalled carbon nanotubes (MWCNTs) using X-ray photoelectron spectroscopy (XPS). By comparing the XPS spectra of 4-NBA derivatized graphite powder and MWCNTs with that of graphite powder treated with benzylamine in a similar fashion, we conclude that benzylamine itself does not undergo partial intercalation. Using in situ atomic force microscopy, we are able to observe the partial intercalation of 4-NBA into an edge-plane-like "step" defect on the surface of a highly ordered pyrolytic graphite crystal in real time.

All-diamond microelectrode array device.

We report the development of all-diamond microelectrochemical devices, namely, a microelectrode array (MEA), in which a periodic array structure with well-defined diameters, distance, and hexagonal unit cell pattern is micromachined using a combination of state-of-the-art microwave-induced plasma growth and laser ablation shaping techniques to prepare and coat a patterned boron-doped diamond (BDD) substrate with an intrinsic diamond insulating layer. The active BDD element can be tuned to between 10 and 50 microm in diameter with a 10 times diameter center-to-center distance between two adjacent conducting elements, which are exactly coplanar to the dielectric surroundings. This type of device should enable applications in harsh conditions such as high temperature, high pressure, and resistive media under dynamic flow regimes.

Graphite powder and multiwalled carbon nanotubes chemically modified with 4-nitrobenzylamine.

We demonstrate that graphite powder and multiwalled carbon nanotubes (MWCNTs) can be derivatised by 4-nitrobenzylamine (4-NBA) simply by stirring the graphite powder or MWCNTs in a solution of acetonitrile containing 10 mM 4-NBA. We propose that 4-NBA partially intercalates at localised edge-plane or edge-plane-like defect sites and this hypothesis with a range of experimental data provided by electrochemistry in both aqueous and nonaqueous media, electron microscopy and X-ray powder diffraction.