Power Efficiency Enhancement of Organic Light-Emitting Diodes Due to the Favorable Horizontal Orientation of a Naphthyridine-Based Thermally Activated Delayed Fluorescence Luminophore.

Four emitters based on the naphthyridine acceptor moiety and various donor units exhibiting thermally activated delayed fluorescence (TADF) were designed and synthesized. The emitters exhibited excellent TADF properties with a small Δ and a high photoluminescence quantum yield. A green TADF organic light-emitting diode based on 10-(4-(1,8-naphthyridin-2-yl)phenyl)-10-phenothiazine exhibited a maximum external quantum efficiency of 16.

Effects of electron transport layer thickness on light extraction in corrugated OLEDs.

This study reported the effects of electron transport layer (ETL) thickness on light extraction in corrugated organic light-emitting diodes (OLEDs) and each layer in OLEDs exhibited a periodical corrugated structure, which was determined by depositing thin films on a glass substrate with a nanoimprinted blazed grating structure. The insight is that light extraction in corrugated OLEDs significantly depends on the ETL thickness. Varying the ETL thickness changed the distribution of carrier recombination and led to exciton formation and optical interference, thereby resulting in different attribution of optical loss modes in OLEDs, which increased or even decreased light extraction and device efficiency.

Lifetime elongation of quantum-dot light-emitting diodes by inhibiting the degradation of hole transport layer.

Developing a colloidal quantum-dot light-emitting device (QDLED) with high efficiency and good reliability is necessarily preliminary for the next-generation high-quality display application. Most QDLED reports are focused on efficiency improvement, but the device operational lifetime issue is less addressed and also the relevant degradation mechanisms. This study achieved a 1.

Deep Blue Fluorescent Material with an Extremely High Ratio of Horizontal Orientation to Enhance Light Outcoupling Efficiency (44%) and External Quantum Efficiency in Doped and Non-Doped Organic Light-Emitting Diodes.

A novel bis-4Ph-substituted 9,10-dipehnylanthracene deep blue [1931 CIE (0.15, 0.08)] fluorescent compound, , has been synthesized and characterized for organic light-emitting diode (OLED) applications.

Nanostructured Molybdenum Trioxide Layer on the Silver Anode of a Top-Incident Organic Photovoltaic Device.

A nanostructured molybdenum trioxide (MoO₃) layer was successfully fabricated utilizing various deposition rates, employed as an anodic buffer layer to separate the active layer from a silver anode and modifying the anodic surface to facilitate hole transportation for top-incident organic photovoltaic (TIOPV) devices. The deposition rate and thickness of the MoO₃ layer were crucial parameters for determining the surface morphology and work function, and the internal optical field distribution, respectively. These factors affected the performance of the devices in terms of their open-circuit voltage (), short-circuit current density (), and fill factor (FF).

Bistriazoles with a Biphenyl Core Derivative as an Electron-Favorable Bipolar Host of Efficient Blue Phosphorescent Organic Light-Emitting Diodes.

High-quality host materials are indispensable for the construction in the emitting layer of efficient organic light-emitting diodes (OLEDs), especially in a guest and host system. The good carrier transport and energy transfer between the host and emitters are out of necessity. In this work, a wide bandgap and bipolar organic compound, 2,2'-bis(4,5-diphenyl-(1,2,4)-triazol-3-yl)biphenyl (), conjugating two electron-transporting triazole moieties on a hole-transporting biphenyl core, was synthesized and characterized.

Corrugated organic light-emitting diodes to effectively extract internal modes.

We report a corrugated structure to effectively extract the surface plasmon polaritons (SPP) and waveguiding modes in organic light-emitting diodes (OLEDs). This structure is formed by nano-imprint of blazed gratings. To study the optimum extraction condition in terms of grating pitches, we compare the light extraction efficiency of corrugated OLEDs with three kinds of pitches, showing a 42.

Carrier Transport and Recombination Mechanism in Blue Phosphorescent Organic Light-Emitting Diode with Hosts Consisting of Cabazole- and Triazole-Moiety.

In this study, we demonstrated a blue phosphorescent organic light-emitting diode (BPOLED) based on a host with two carbazole and one trizole (2CbzTAZ) moiety, 9,9'-(2-(4,5-diphenyl-4H-1,2,4-triazol-3-yl)-1,3-phenylene)bis(9H-carbazole), that exhibits bipolar transport characteristics. Compared with the devices with a carbazole host (N,N'-dicarbazolyl-3,5-benzene, (mCP)), triazole host (3-(biphenyl-4-yl)-5-(4-tert-butylphenyl)-4-phenyl-4H-1,2,4-triazole, (TAZ)), or a physical mixture of mCP:TAZ, which exhibit hole, electron, and bipolar transport characteristics, respectively, the BPOLED with the bipolar 2CbzTAZ host exhibited the lowest driving voltage (6.55 V at 10 mA/cm), the highest efficiencies (maximum current efficiency of 52.

New D-A-A-Configured Small-Molecule Donors for High-Efficiency Vacuum-Processed Organic Photovoltaics under Ambient Light.

Four new donor-acceptor-acceptor (D-A-A) type molecules (DTCPB, DTCTB, DTCPBO, and DTCTBO), wherein benzothiadiazole or benzoxadiazole serves as the central A bridging triarylamine (D) and cyano group (terminal A), have been synthesized and characterized. The intramolecular charge-transfer character renders these molecules with strong visible light absorption and forms antiparallel dimeric crystal packing with evident π-π intermolecular interactions. The characteristics of the vacuum-processed photovoltaic device with a bulk heterojunction active layer employing these molecules as electronic donors combining C as electronic acceptor were examined and a clear structure-property-performance relationship was concluded.

Simple Molecular-Engineering Approach for Enhancing Orientation and Outcoupling Efficiency of Thermally Activated Delayed Fluorescent Emitters without Red-Shifting Emission.

The inclusion of a tetraphenylbenzene (4Ph) unit in thermally activated delayed fluorescence emitters is demonstrated as a novel strategy for greatly enhancing the horizontally oriented alignment of the emitters without shifting the emission spectrum to longer wavelengths. Doping of blue-emitting 4PhOXDDMAC or greenish-blue-emitting 4PhOXDPXZ into o-DiCbzBz host layers yielded much higher degrees of horizontally oriented alignment for the emitter (up to 92%) compared to those when the 4Ph unit was excluded (69 and 75%, respectively). The enhanced alignment results in high outcoupling efficiencies of 24 and 35% in organic light-emitting diodes based on 4PhOXDDMAC and 4PhOXDPXZ, respectively, and boosts the external quantum efficiencies to values (8.

Efficient Triplet-Triplet Annihilation Upconversion in an Electroluminescence Device with a Fluorescent Sensitizer and a Triplet-Diffusion Singlet-Blocking Layer.

Solid-state triplet-triplet annihilation upconversion (TTAUC) blue emission in an electroluminescence device (i.e., an organic light-emitting diode (OLED)) is demonstrated.

Construction of Highly Efficient Carbazol-9-yl-Substituted Benzimidazole Bipolar Hosts for Blue Phosphorescent Light-Emitting Diodes: Isomer and Device Performance Relationships.

Four isomers of carbazol-9-yl-substituted 1,2-diphenylbenzimidazole at 7, 6, 5, and 4 positions, named as 1-CbzBiz, 2-CbzBiz, 3-CbzBiz, and 4-CbzBiz, respectively, have been synthesized. Instead of having an identical molecular weight, the CbzBiz's have their glass transition temperatures ( T) spanning a large range from 53 to 90 °C. Their T and melting point ( T) basically obey the Boyer-Kauzmann rule ( T = g· T with g ≈ 0.

Exciton dynamics in heterojunction thin-film devices based on exciplex-sensitized triplet-triplet annihilation.

Exciton dynamics in a solid-state exciplex sensitized triplet-triplet annihilation (ESTTA) system are studied using transient photoluminescence (TrPL) measurements. The ESTTA system is a trilayer structure with 4,4',4''-tris(N-3-methyphenyl-N-phenyl-amino)triphenylamine (m-MTDATA) acting as the electron donor, 1-(2,5-dimethyl-4-(1-pyrenyl)phenyl)pyrene (DMPPP) as a triplet-diffusion-singlet-blocking (TDSB) layer, and 9,10-bis(2'-naphthyl) anthracene (ADN), acting as the electron acceptor and emitter. The thicknesses of the m-MTDATA and ADN layers are 30 nm, while the thickness of the DMPPP layer is varied to characterize its effect on the singlet quenching of the ADN emission.

Modeling of carrier transport in organic light emitting diode with random dopant effects by two-dimensional simulation.

To model the carrier transport in organic light-emitting diodes (OLEDs) with random dopant effects in the emitting layer, two-dimensional simulation was used. By including the Gaussian shape density of states and field-dependent mobility in the Poisson and drift-diffusion solver, the carrier transport, trapping in the dopant state, and radiative recombination were accurately modeled. To examine the model, the current-voltage characteristics of organic light-emitting devices were compared.

Exciplex-Sensitized Triplet-Triplet Annihilation in Heterojunction Organic Thin-Film.

A new concept for organic light-emitting diodes (OLEDs) is presented, which is called exciplex-sensitized triplet-triplet annihilation (ESTTA). The exciplex formed at the organic heterojunction interface of 4,4',4″-tris(N-3-methyphenyl-N-phenyl-amino) triphenylamine and 9,10-bis(2'-naphthyl) anthracene (ADN) is used to sensitize the triplet-triplet annihilation (TTA) process on the ADN molecules. This results in a turn-on voltage (2.

Easy Access to NO2 -Containing Donor-Acceptor-Acceptor Electron Donors for High Efficiency Small-Molecule Organic Solar Cells.

Two donor-acceptor-acceptor (D-A-A)-type molecules incorporating nitrobenzoxadiazole (NBO) as the A-A block and ditolylamine as the D block bridged through a phenylene (PNBO) and a thiophene (TNBO) spacer were synthesized in a one-step coupling reaction. Their electronic, photophysical, and thermal properties; crystallographic analysis; and theoretical calculations were studied to establish a clear structure-property relationship. The results indicate that the quinoidal character of the thiophene bridge strongly governs the structural features and crystal packings (herringbone vs.

Orthogonally Substituted Benzimidazole-Carbazole Benzene As Universal Hosts for Phosphorescent Organic Light-Emitting Diodes.

The novel ambipolar hosts of o-CbzBz and o-DiCbzBz contain carbazole and benzimidazole through an ortho-connection. The orthogonal conformations cause the triplet state to be confined at the carbazole units to secure efficient energy transfer. The phosphorescent organic light-emitting diodes (PhOLEDs) show a high current efficiency, power efficiency, and low efficiency roll-off.

Optimization of Metal Oxides Thickness and Related Organic Electroluminescent Device Performance.

In this study, three commercial transition metal oxides such as molybdenum trioxide (MoO3), tungsten trioxide (WO3), and vanadium pent-oxide (V2O5) were employed as hole-injection layer to improve the electrical and optical performance of organic light-emitting diodes (OLEDs). The layer thickness of MoO3, WO3 and V2O5 were respectively varied by 1, 2, 5 and 10 nm inside blue OLED to characterize their effects on device performance. The optimal OLED with a 5 nm MoO3 hole-injection layer performs an enhancement of 12.

Efficiency Improvement of Organic Photovoltaic Using Ozone and PEDOT:PSS Modifications on Ag Anode.

Unlabelled: We demonstrated a fabrication process using UV-Ozone treatment to obtain a qualified silver oxide (AgOx) film to be anode, and then spinning the poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (

Pedot: PSS) layer on the Ag/AgOx anode to smooth the its surface, resulting to efficiency improvement of the organic photovoltaic (OPV). The basic OPV structure mainly contained with a high reflective Ag anode, a semitransparent Ag cathode and a planar heterojunction small molecular active layer. Surface morphologies, roughness, reflectivity and workfunction of Ag/AgOx anode with various UV-Ozone treatment times were investigated to affect the device performance.

Novel benzimidazole derivatives as electron-transporting type host to achieve highly efficient sky-blue phosphorescent organic light-emitting diode (PHOLED) device.

The development of benzimidazole substituted biphenyls as electron-transporting hosts for bis[2-(4,6-difluorophenyl)pyridinato-C(2),N](picolinato)iridium(III) is reported. Under the optimized conditions, the organic light-emitting diode (OLED) achieves the maximum current efficiency of 57.2 cd/A, power efficiency of 50.

Novel ambipolar orthogonal donor-acceptor host for blue organic light emitting diodes.

Ambipolar triplet hosts comprising 1,2,4-triazole and carbazole in ortho-positions have been developed. The blue PHOLED has a high current efficiency of 47.1 cd A(-1), power efficiency of 41.

Carrier injection and transport in blue phosphorescent organic light-emitting device with oxadiazole host.

In this paper, we investigate the carrier injection and transport characteristics in iridium(III)bis[4,6-(di-fluorophenyl)-pyridinato-N,C2']picolinate (FIrpic) doped phosphorescent organic light-emitting devices (OLEDs) with oxadiazole (OXD) as the bipolar host material of the emitting layer (EML). When doping Firpic inside the OXD, the driving voltage of OLEDs greatly decreases because FIrpic dopants facilitate electron injection and electron transport from the electron-transporting layer (ETL) into the EML. With increasing dopant concentration, the recombination zone shifts toward the anode side, analyzed with electroluminescence (EL) spectra.

Optical effects of shadow masks on short circuit current of organic photovoltaic devices.

In this paper, we have employed different shadow masks attached on top of organic photovoltaic (OPV) devices to study the optical effects of the former on the short circuit current (J(SC)). To rule out possible lateral electrical conduction and simplify the optical effects inside the device, a small-molecular heterojunction OPV device with a clear donor/acceptor interface was employed with a hole extraction layer exhibiting high resistance intentionally. Careful calibration with a shadow mask was employed.

High photoelectric conversion efficiency of metal phthalocyanine/fullerene heterojunction photovoltaic device.

This paper introduces the fundamental physical characteristics of organic photovoltaic (OPV) devices. Photoelectric conversion efficiency is crucial to the evaluation of quality in OPV devices, and enhancing efficiency has been spurring on researchers to seek alternatives to this problem. In this paper, we focus on organic photovoltaic (OPV) devices and review several approaches to enhance the energy conversion efficiency of small molecular heterojunction OPV devices based on an optimal metal-phthalocyanine/fullerene (C(60)) planar heterojunction thin film structure.