Mercury speciation and mass distribution of coal-fired power plants in Taiwan using different air pollution control processes.

In this study, the mercury (Hg) emission, speciation, and mass distribution of four coal-fired power plants (CFPPs) located at central, southern, and northern Taiwan with various types of air pollution control devices were investigated. Gaseous Hg in the coal-combustion flue gas was sampled by using the Ontario Hydro method, and the solid and liquid samples were collected for understanding the Hg mass balance. The experimental results showed that the total Hg concentrations in flue gases at the inlets of selective catalytic reduction (SCR) varied from 2.

Volatile fatty acids production from saccharification residue from food waste ethanol fermentation: Effect of pH and microbial community.

In this study, residue from saccharification and centrifugation of food waste ethanol fermentation was used as substrate to produce volatile fatty acids. The effects of different pH (5.5, 6.

Performance of electrodialysis reversal and reverse osmosis for reclaiming wastewater from high-tech industrial parks in Taiwan: A pilot-scale study.

Wastewater reclamation is considered an absolute necessity in Taiwan, as numerous industrial parks experience water shortage. However, the water quality of secondary treated effluents from sewage treatment plants generally does not meet the requirements of industrial water use because of the high inorganic constituents. This paper reports experimental data from a pilot-plant study of two treatment processes-(i) fiber filtration (FF)-ultrafiltration (UF)-reverse osmosis (RO) and (ii) sand filtration (SF)-electrodialysis reversal (EDR)-for treating industrial high conductivity effluents from the Xianxi wastewater treatment plant in Taiwan.

Methylmercury Concentration in Fish and Risk-Benefit Assessment of Fish Intake among Pregnant versus Infertile Women in Taiwan.

This study examined methylmercury (MeHg) concentrations in fish, the daily MeHg exposure dose, and the risk-benefit of MeHg, ω-3 polyunsaturated fatty acid (ω-3 PUFA), docosahexaenoic acid (DHA), and eicosapentaenoic acid (EPA) related to fish intake among pregnant and infertile women in Taiwan. The measured MeHg concentrations in fish did not exceed the Codex guideline level of 1 mg/kg. Swordfish (0.

Combined photocatalysis and membrane bioreactor for the treatment of feedwater containing thin film transistor-liquid crystal display discharge.

The nitrogen content of waste water generated by the thin film transistor-liquid crystal display (TFT-LCD) industry is not satisfactorily removed through the conventional aerobic-activated sludge process. In this study, the performance of three reactors – suspended type TiO2 membrane photoreactor (MPR), anoxic/oxic membrane bioreactor (AOMBR), and their combination (MPR-AOMBR) – was evaluated using feedwater containing TFT-LCD discharge. The parameters that maximized monoethanolamine (MEA) removal in the MPR were continuous ultraviolet (UV) irradiation and pH 11.

Effects of properties of manganese oxide-impregnated catalysts and flue gas condition on multipollutant control of Hg0 and NO.

This research investigated the effects of manganese oxide (MnOx) impregnation on the physical/chemical properties and multi pollutant control effectiveness of Hg(0) and NO using a V2O5-WO3/TiO2-SiO2 selective catalytic reduction (SCR) catalyst. Raw and MnOx-treated SCR samples were bean-shaped nanoparticles with sizes within 10-30 nm. Impregnating MnOx of ≤ 5 wt% caused limited changes in physical properties of the catalyst.

Elucidating the effects of solar panel waste glass substitution on the physical and mechanical characteristics of clay bricks.

This study deals with the effect of solar panel waste glass on fired clay bricks. Brick samples were heated to temperatures which varied from 700-1000 degrees C for 6 h, with a heating rate of 10 degrees C min(-1). The material properties of the resultant material were then determined, including speciation variation, loss on ignition, shrinkage, bulk density, 24-h absorption rate, compressive strength and salt crystallization.

Hydrothermal treatment of electric arc furnace dust.

In this study, ZnO crystals were fabricated from electric arc furnace dust (EAFD) after alkaline leaching, purification and hydrothermal treatment. The effects of temperature, duration, pH, and solid/liquid ratio on ZnO crystal morphology and size were investigated. Results show a high reaction temperature capable of accelerating the dissolution of ZnO precursor, expediting the growth of 1D ZnO, and increasing the L/D ratio in the temperature range of 100-200°C.

Predicting the co-melting temperatures of municipal solid waste incinerator fly ash and sewage sludge ash using grey model and neural network.

A grey model (GM) and an artificial neural network (ANN) were employed to predict co-melting temperature of municipal solid waste incinerator (MSWI) fly ash and sewage sludge ash (SSA) during formation of modified slag. The results indicated that in the aspect of model prediction, the mean absolute percentage error (MAPEs) were between 1.69 and 13.

Photosensitized reduction of DDT using visible light: the intermediates and pathways of dechlorination.

A reaction mixture containing DDT (1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane), methylene green (as the photosensitizer), and triethylamine (as the electron donor) in acetonitrile:water (1:1) was irradiated by an ordinary 150-W GE-Miser spotlight to facilitate visible-light photosensitized DDT dehalogenation. The intermediates and reaction products were identified by GC/MS (gas chromatography/mass spectrometer) and NMR (nuclear magnetic resonance). The photosensitized dehalogenation method partially degraded DDT via an electron transfer relay mechanism.

Report: transboundary hazardous waste management. part II: performance auditing of treatment facilities in importing countries.

Before implementing the self-monitoring model programme of the Basel Convention in the Asia, Taiwan has conducted a comprehensive 4-year follow-up project to visit the governmental authorities and waste-disposal facilities in the countries that import waste from Taiwan. A total of nine treatment facilities, six of which are reported in this paper, and the five countries where the plants are located were visited in 2001-2002. France, Belgium and Finland primarily handled polychlorinated biphenyl capacitors, steel mill dust and metal waste.

Transboundary hazardous waste management. Part I: Waste management policy of importing countries.

Mixed metal-containing waste, polychlorinated biphenyls (PCB) containing capacitors, printed circuit boards, steel mill dust and metal sludge were among the most common wastes exported from Taiwan. Before the implementation of the self-monitoring model programme of the Basel Convention (secretariat of the Basel Convention 2001) in the Asia region, Taiwan conducted a comprehensive 4-year follow-up project involving government authorities and the waste disposal facilities of the importing countries. A total of five countries and nine plants were visited in 2001-2002.

Management and performance of Taiwan's waste recycling fund.

Taiwan's resource recycling program was formally established in 1989, starting with the mandatory recycling of polyethylene terephthalate bottles. The number of mandatory regulated materials was extended to 8 categories with 27 items by 2002. Because of false data reporting, financial scandal, lack of transparency of the system, and the demand from parliament, the recycling policy has gradually changed from entirely privatized to being nationalized.

An overview of recycling and treatment of scrap computers.

In order to recover valuable materials and to minimize the adverse effects of hazardous materials contained in scrap computers, a dismantling practice is commonly adopted to treat scrap computers. By using the dismantling process, both useful and hazardous materials can be manually separated and retrieved. On the basis of the properties of the retrieved materials, they can be sent to appropriate facilities for further recycling or treatment.