Mechanical pretreatment of typical agricultural biomass on shape characterization and NO emissions during combustion.

The impact of mechanical pretreatment of corn straw (CS), pea straw (PS), and wheat straw (WS), on shape characterization and NO emissions during combustion were investigated in this research. Particle size ranges were obtained and characterized their shape factors using Image J correction. The thermal properties and NO emissions of the different-sized particles were investigated by TG-MS and fixed-bed reactor.

Fluorescence wavelength shifts combined with light scattering for ratiometric sensing of chloride in the serum based on CsPbBr@SiO perovskite nanocrystal composite halide exchanges.

A traditional fluorescence-scattering intensity based ratiometric sensing system utilizes both inherent scattering and fluorescence intensity and has drawn extensive attention owing to its simplicity and self-calibration properties. In this work, we propose a novel ratiometric fluorescence sensing system that combines a fluorescence wavelength shift and scattering in a single window, using second-order scattering (SOS) as the representative scattering signal based on the halide exchange of CsPbBr@SiO perovskite nanocrystal composites. We observe a fast halide exchange within 10 seconds, resulting in an identifiable fluorescence wavelength blue shift, while the scattering wavelength remains relatively constant for self-correction.

Green synthesis of highly stable CsPbBr perovskite nanocrystals using natural deep eutectic solvents as solvents and surface ligands.

Perovskite nanocrystals (PNCs) have attracted widespread attention as promising materials for the optoelectronic field due to their remarkable photophysical properties and structural tunability. However, their poor stability and the use of toxic organic solvents in the preparation process have severely restricted their practical applications. Herein, a facile, rapid and toxic organic solvent-free synthesis strategy of CsPbBr PNCs was developed for the first time the ligand-assisted reprecipitation (LARP) method using natural deep eutectic solvents (NADESs) as solvents and surface ligands.

Traffic light-type ratiometric fluorescence visual sensing of Cs in soybean oil based on dimension regulation of 2D perovskite nanosheets.

Determination of cesium ion in soybean oil is of high importance since the increasing risk from releasing of main component of nuclear waste cesium 137. The complex composition and high viscosity of soybean oil make it necessary to convert it into water phase by nitration before detection, so developing a simple, accurate and sensitive method for on-site sensing of Cs in soybean oil is still a big challenge. In this work, we report a traffic light-type ratiometric fluorescence strategy for the visual sensing of Cs in soybean oil based on dimensional regulation of two dimensional (PEA)PbI perovskite nanosheets (NSs).

Experimental study on co-combustion of low rank coal semicoke and oil sludge by TG-FTIR.

Co-combustion was proposed as an effective and complementary means for the co-treatment of low rank coal semicoke (LRCS) and oil sludge. The combustion, kinetics and gaseous pollutants emission characteristics during co-combustion of LRCS and oil sludge were investigated by thermogravimetric analyzer coupled with Fourier transform infrared spectrometer (TG-FTIR). Results showed oil sludge had more complex weight loss characteristics than LRCS.

Kinetic and energy production analysis of pyrolysis of lignocellulosic biomass using a three-parallel Gaussian reaction model.

The kinetic and energy productions of pyrolysis of a lignocellulosic biomass were investigated using a three-parallel Gaussian distribution method in this work. The pyrolysis experiment of the pine sawdust was performed using a thermogravimetric-mass spectroscopy (TG-MS) analyzer. A three-parallel Gaussian distributed activation energy model (DAEM)-reaction model was used to describe thermal decomposition behaviors of the three components, hemicellulose, cellulose and lignin.

TG-MS analysis and kinetic study for thermal decomposition of six representative components of municipal solid waste under steam atmosphere.

Thermal decomposition of six representative components of municipal solid waste (MSW, including lignin, printing paper, cotton, rubber, polyvinyl chloride (PVC) and cabbage) was investigated by thermogravimetric-mass spectroscopy (TG-MS) under steam atmosphere. Compared with TG and derivative thermogravimetric (DTG) curves under N2 atmosphere, thermal decomposition of MSW components under steam atmosphere was divided into pyrolysis and gasification stages. In the pyrolysis stage, the shapes of TG and DTG curves under steam atmosphere were almost the same with those under N2 atmosphere.

Multi-Gaussian-DAEM-reaction model for thermal decompositions of cellulose, hemicellulose and lignin: comparison of N₂ and CO₂ atmosphere.

Thermal decompositions of three components of biomass (cellulose, hemicellulose and lignin) were studied using nonisothermal thermogravimetric analysis (TGA) under both oxidative and inert atmospheres at a heating rate of 10 K min(-1). The multi-Gaussian-distributed activation energy model (DAEM)-reaction model was first developed to describe thermal decomposition behaviors of three components. Results showed that the presence of CO₂ enhanced the thermal decompositions of three components in high temperature range, but made little difference in low temperature range.

TG/FTIR analysis on co-pyrolysis behavior of PE, PVC and PS.

The pyrolysis and co-pyrolysis behaviors of polyethylene (PE), polystyrene (PS) and polyvinyl chloride (PVC) under N2 atmosphere were analyzed by Thermal gravimetric/Fourier transform infrared (TG/FTIR). The volatile products were analyzed to investigate the interaction of the plastic blends during the thermal decomposition process. The TGA results showed that the thermal stability increased followed by PVC, PS and PE.

Gasification kinetic analysis of the three pseudocomponents of biomass-cellulose, semicellulose and lignin.

The gasification kinetic analysis of the three pseudocomponents (hemicellulose, cellulose and lignin) of biomass decomposition in the agent of CO2 were investigated. The Multi-peaks method was used to fit the Gaussian distribution model of DTG curves. The Friedman method was used to estimate the effective Eα, and the master plot method was used for the determination of the kinetic model.

Steam reforming of bio-oil from rice husks fast pyrolysis for hydrogen production.

Steam reforming of two kinds of bio-oil from rice husks fast pyrolysis was conducted for hydrogen production at three temperatures (650, 750 and 850 °C) with Ni-based catalyst in a fixed-bed reactor. The gas composition and organic compounds in liquid condensate were detected by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS), respectively. In addition, the carbon deposition was also investigated.

Effect of hot vapor filtration on the characterization of bio-oil from rice husks with fast pyrolysis in a fluidized-bed reactor.

To produce high quality bio-oil from biomass using fast pyrolysis, rice husks were pyrolyzed in a 1-5 kg/h bench-scale fluidized-bed reactor. The effect of hot vapor filtration (HVF) was investigated to filter the solid particles and bio-char. The results showed that the total bio-oil yield decreased from 41.