Twisted van der Waals systems have emerged as intriguing arenas for exploring exotic strongly correlated and topological physics, with structural reconstruction and strain playing essential roles in determining their electronic properties. In twisted bilayer graphene aligned with hexagonal boron nitride (TBG/h-BN), the interplay between the two sets of moiré patterns from graphene-graphene (G-G) and graphene-h-BN (G-h-BN) interfaces can trigger notable moiré pattern reconstruction (MPR). Here, we present the quasiperiodic MPR in the TBG/h-BN with two similar moiré wavelengths, wherein the MPR results from the incommensurate mismatch between the wavelengths of the G-G and G-h-BN moiré patterns.
View Article and Find Full Text PDFUltra-thin 2D materials have great potential as electrodes for micro-supercapacitors (MSCs) because of their facile ion transport channels. Here, a high-precision controllable photonic-synthesis strategy that provided 1 inch wafer-scale ultra-thin film arrays of alloyed WMoS with sulfur vacancies and expanded interlayer (13.2 Å, twice of 2H MoS) is reported.
View Article and Find Full Text PDFBackground: Owing to the long penetration depth of gamma (γ)-rays, individuals working in ionizing radiation environments are chronically exposed to low-dose γ-radiation, resulting in cognitive changes. Dose rate significantly affects radiation-induced biological effects; however, its role in chronic low-dose γ-irradiation-induced cognitive impairment remains unclear. We aimed to investigate whether chronic low-dose γ-irradiation at low-dose-rate (LDR) could induce cognitive impairment and to compare the cognitive alteration caused by chronic low-dose γ-irradiation at LDR and high-dose-rate (HDR).
View Article and Find Full Text PDFUnderstanding and controlling the wear process of heterogeneous interfaces between soft and hard phases is crucial for designing and fabricating materials, such as improving the wear resistance of particle reinforced metal matrix composites and the accuracy and efficiency of chemical mechanical polishing. However, the wear process can be hardly observed, as interfaces are buried under the surface. Here, we proposed a nanowear test method by combining focused ion beam cutting to expose interfaces, atomic force microscopy to rub against interfaces, and scanning electron microscope to characterize the interface damage.
View Article and Find Full Text PDFPurposes: Radiotherapy can induce tumor cell autophagy, which might impair the antitumoral effect. This study aims to investigate the effect of autophagy inhibition on the targeted radionuclide therapy (TRT) efficacy of I-FAP-2286 in pancreatic cancer.
Methods: Human pancreatic cancer PANC-1 cells were exposed to I-FAP-2286 radiotherapy alone or with the autophagy inhibitor 3-MA.
Background: Umbilical cord blood has been widely used in clinical transplantation. Blood gas analysis of umbilical cord blood is routinely used to evaluate neonatal asphyxia. This study aimed to evaluate an improved umbilical cord blood collection method that does not affect the results of umbilical cord blood gas analysis and hematopoietic stem cell transplantation-related indices.
View Article and Find Full Text PDFLubrication of polymeric materials generally involves processes of atomic-scale chemical bond forming/breaking at the interface and mesoscale chain reorientation, disentanglement, and so forth. However, it is difficult to describe the important aspects of tribochemical reactions by conventional coarse-grained molecular dynamics (CGMD) simulations. Here, reactive CGMD simulations were conducted based on the ReaxFF force field to study the tribochemical interactions between polytetrafluoroethylene (PTFE) and iron.
View Article and Find Full Text PDFUsing atomic force microscopy, we have shown that friction on graphene/h-BN superlattice structures may exhibit unusual moiré-scale stick slip in addition to the regular ones observed at the atomic scale. Such dual-scale slip instability will lead to unique length-scale dependent energy dissipation when the different slip mechanisms are sequentially activated. Assisted by an improved theoretical model and comparative experiments, we find that accumulation and unstable release of the in-plane strain of the graphene layer is the key mechanism underlying the moiré-scale behavior.
View Article and Find Full Text PDFAtomic reconstruction has been widely observed in two-dimensional van der Waals structures with small twist angles. This unusual behaviour leads to many novel phenomena, including strong electronic correlation, spontaneous ferromagnetism and topologically protected states. Nevertheless, atomic reconstruction typically occurs spontaneously, exhibiting only one single stable state.
View Article and Find Full Text PDFACS Appl Mater Interfaces
February 2022
The tribochemistry and transfer film formation at the metal/polymer interface plays an essential role in surface protection, wear reduction, and lubrication. Although the topic has been studied for decades, challenges persist in clarifying the nanoscale mechanism and dynamic evolution of tribochemical reactions. To investigate the tribochemistry between iron and polytetrafluoroethylene (PTFE) in ambient and cryogenic environments, we have trained and expanded a ReaxFF reactive force field to describe iron-oxygen-water-PTFE systems (C/H/O/F/Fe).
View Article and Find Full Text PDFA fundamental cryogenic study in tribology from 20 to 300 K revealed that a kind of disulfide film could exhibit a superlubricity state. Inspired by this, we designed a more delicate experiment and reported an extremely low friction coefficient for a multilayered MoS-Ag film in a cryogenic environment against a bare steel ball under a high load. The results showed that the multilayered MoS-Ag film could undergo a pressure exceeding 2 GPa to maintain a superlow friction coefficient of below 0.
View Article and Find Full Text PDFJ Phys Chem Lett
October 2021
A hydrogenated amorphous carbon (a-C:H) film shows an ultralow friction coefficient (COF, lower than 0.01); however, its wear life is short in vacuum, and the mechanisms are still not well-understood. This study demonstrates the vacuum tribological behaviors of the a-C:H film can be regulated by interfacial activity.
View Article and Find Full Text PDFThe small white cabbage butterfly (Pieris rapae) flaps its fore- and hindwings in synchrony as the wings are coupled using a wing "coupling mechanism". The coupling mechanism of butterflies includes an enlarged humeral area located at the anterior of the hindwing base and a corresponding basal posterior part of the forewing, of which the former component dorsally contacts the ventral side of the latter one. The coupling mechanism allows for the fore- and hindwings sliding in contact along the span and chord.
View Article and Find Full Text PDFPurpose: Cerebral palsy (CP) is the most common neuromuscular disease in children, and currently, there is no cure. Several studies have reported the benefits of umbilical cord blood (UCB) cell treatment for CP. However, these studies either examined the effects of UCB cell fraction with a short experimental period or used neonatal rat models for a long-term study which displayed an insufficient immunological reaction and clearance of human stem cells.
View Article and Find Full Text PDFObjective: To study the impact of anticoagulant to the quality of umbilical cord blood (UCB).
Methods: 6060 cord blood units (CBUs) were classified into five groups, such as 28 ml: (10-29) ml, 28 ml: (30-69) ml, 28 ml: (70-109) ml, 28 ml: (110-150) ml and 28 ml: (>150) ml according to volume ratio of anticoagulant and CBVs. The count of pre-cryopreservation total nucleated cell (pre-TNC), the viability of nucleated cell (VNC), the amount of CFU-GM and the ratio changes of CD34 were evaluated and analyzed statistically.
Diamond-like carbon (DLC) films are capable of achieving superlubricity at sliding interfaces by a rapid running-in process. However, fundamental mechanisms governing the friction evolution during this running-in processes remain elusive especially at the nanoscale, which hinders strategic tailoring of tribosystems for minimizing friction and wear. Here, it is revealed that the running-in governing superlubricity of DLC demonstrates two sub-stages in single-asperity nanocontacts.
View Article and Find Full Text PDFControlling the interlayer twist angle offers a powerful means for tuning the electronic properties of two-dimensional (2D) van der Waals materials. Typically, the electrical conductivity would increase monotonically with decreasing twist angle owing to the enhanced coupling between adjacent layers. Here, we report a nonmonotonic angle-dependent vertical conductivity across the interface of bilayer graphene with low twist angles.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2020
Graphite has been conventionally believed to exhibit an inferior lubricating performance with significantly larger friction coefficient and wear rate in a vacuum environment than in ambient air. Dangling bonds at the edge planes of graphite, accounting for the high friction in inert atmosphere are saturated by chemisorbed vapor molecules in air, which contributes to low surface adhesion and low friction. However, there is still a lack of direct experimental evidence whether basal planes of graphite excluding the negative effects of edges or dangling bonds shows intrinsic lubricity when sliding under ultrahigh vacuum (UHV) conditions.
View Article and Find Full Text PDFIn this study, we investigated the morphological features and tensile properties of the forewing costal vein of the honeybee (Apis mellifera) under fresh, dry and in vitro-time varied conditions. The costal vein is composed of an outer sub-vein and an inner vein starting from the wing base to nearly 50% of the wing span and then they are fused into one vein extending to the wing tip. Confocal laser scanning microscopy revealed that the outer sub-vein with red autofluorescence is stiffer than the inner one with green autofluorescence, and the membrane in the gap between the sub-veins exhibited a long blue-autofluorescence resilin stripe.
View Article and Find Full Text PDFSimultaneously achieving low friction and fine electrical conductance of sliding electrical contacts is a crucial factor but a great challenge for designing high-performance microscale and nanoscale functional devices. Through atomistic simulations, we propose an effective design strategy to obtain both low friction and high conductivity in sliding electrical contacts. By constructing graphene(Gr)/MoS two-dimensional (2D) heterojunctions between sliding Cu surfaces, superlubricity can be achieved with a remarkably lowered sliding energy barrier as compared to that of the homogeneous MoS lubricated Cu contact.
View Article and Find Full Text PDFPreterm birth and its complications are the leading cause of neonatal death. The main underlying pathological mechanisms for preterm complications are disruption of the normal maturation processes within the target tissues, interrupted by premature birth. Cord blood, as a new and convenient source of stem cells, may provide new, promising options for preventing preterm complications.
View Article and Find Full Text PDFFor atomically thin two-dimensional materials, interfacial effects may dominate the entire response of devices, because most of the atoms are in the interface/surface. Graphene/sapphire has great application in electronic devices and semiconductor thin-film growth, but the nature of this interface is largely unknown. Here we find that the sapphire surface has a strong interaction with some of the carbon atoms in graphene to form a C-O-Al configuration, indicating that the interface interaction is no longer a simple van der Waals interaction.
View Article and Find Full Text PDFContamination is a major concern in surface and interface technologies. Given that graphene is a 2D monolayer material with an extremely large surface area, surface contamination may seriously degrade its intrinsic properties and strongly hinder its applicability in surface and interfacial regions. However, large-scale and facile treatment methods for producing clean graphene films that preserve its excellent properties have not yet been achieved.
View Article and Find Full Text PDF