Early shape change behaviour of an uncemented contemporary hip cup: A cadaveric experiment replicating host bone behaviour through temperature control.

Modular uncemented acetabular components are in common use. Fixation is dependent upon press-fit but the forces necessary to achieve initial stability of the construct at implantation may deform the shell and prevent optimal seating of the polyethylene liner insert. Previous work using single-time point measurements in uncontrolled ambient temperature poorly replicates the native state.

Mechanical properties of cancellous bone from the acetabulum in relation to acetabular shell fixation and compared with the corresponding femoral head.

To gain initial stability for cementless fixation the acetabular components of a total hip replacement are press-fit into the acetabulum. Uneven stiffness of the acetabular bone will result in irregular deformation of the shell which may hinder insertion of the liner or lead to premature loosening. To investigate this, we removed bone cores from the ilium, ischium and pubis within each acetabulum and from selected sites in corresponding femoral heads from four cadavers for mechanical testing in unconfined compression.

Acetabular shell deformation as a function of shell stiffness and bone strength.

Press-fit acetabular shells used for hip replacement rely upon an interference fit with the bone to provide initial stability. This process may result in deformation of the shell. This study aimed to model shell deformation as a process of shell stiffness and bone strength.

[Pressfit of equatorially roughened cementless acetabular components--a finite element analysis].

Aim: Does the pressfit anchorage of cementless acetabular cups depend on the roughness of the pole? To answer this question the primary pressfit of two cementless acetabular cups which differ only with regard to the roughness of their poles were compared by means of finite elements analysis.

Materials And Methods: It was assumed that the material properties of bone are homogeneous, isotropic and linearly elastic. Material-specific values of cancellous bone with three different bone densities were used.

Concept and development of an orthotropic FE model of the proximal femur.

Purpose: In contrast to many isotropic finite-element (FE) models of the femur in literature, it was the object of our study to develop an orthotropic FE "model femur" to realistically simulate three-dimensional bone remodelling.

Methods: The three-dimensional geometry of the proximal femur was reconstructed by CT scans of a pair of cadaveric femurs at equal distances of 2mm. These three-dimensional CT models were implemented into an FE simulation tool.