Graphite-Mediated Microwave-Exfoliated Graphene Fluoride as Supercapacitor Electrodes.

A graphite-mediated microwave-based strategy was used for solid-state exfoliation of graphite fluoride in a few seconds, followed by a simple yet efficient separation to obtain exfoliated materials based on the density difference between graphite and graphene fluoride in solvent. The microwave-exfoliated graphene fluoride was a few layers thick and electrically conductive. The electrochemical testing of pouch-cell supercapacitors assembled by using the exfoliated graphene fluoride electrodes and a novel microemulsion-based electrolyte showed reasonable performance with typical electrical double-layer capacitance behavior and good rate capability (gravimetric specific capacitance: 3.

Unraveling the multivalent aluminium-ion redox mechanism in 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA).

Rechargeable Aluminium-organic batteries are an exciting emerging energy storage technology owing to their low cost and promising high performance, thanks to the ability to allow multiple-electron redox chemistry and multivalent Al-ion intercalation. In this work, we use a combination of Density Functional Theory (DFT) calculations and experimental methods to examine the mechanism behind the charge-discharge reaction of the organic dye 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) in the 1,3-ethylmethylimidazolium (EMIm) chloroaluminate electrolyte. We conclude that, contrary to previous reports claiming the intercalation of trivalent Al, the actual ionic species involved in the redox reaction is the divalent AlCl.

Novel devices for isolation and detection of bacterial and mammalian extracellular vesicles.

Extracellular vesicles are spherical nanoparticles inherently released by almost all cell types. They acquire the cell's membrane and cytoplasmic characteristics offering abundant identical units that can be captured to recognize the cell of origin. The abundance of vital cell information and multifunctional roles in cellular processes has rendered them attention, particularly as promising biomarkers for disease diagnosis and use in potential drug delivery systems.

Corrigendum: Electrospun, Oriented, Ferromagnetic Ni Fe Nanofibers.

[This corrects the article DOI: 10.3389/fchem.2020.

Photometric Sensing of Active Chlorine, Total Chlorine, and pH on a Microfluidic Chip for Online Swimming Pool Monitoring.

A microfluidic sensor was studied for the photometric detection of active chlorine, total chlorine, and pH in swimming pool samples. The sensor consisted of a four-layer borosilicate glass chip, containing a microchannel network and a 2.2 mm path length, 1.

Highly efficient electrocatalytic hydrogen evolution promoted by O-Mo-C interfaces of ultrafine β-MoC nanostructures.

Optimizing interfacial contacts and thus electron transfer phenomena in heterogeneous electrocatalysts is an effective approach for enhancing electrocatalytic performance. Herein, we successfully synthesized ultrafine β-MoC nanoparticles confined within hollow capsules of nitrogen-doped porous carbon (β-MoC@NPCC) and found that the surface layer of molybdenum atoms was further oxidized to a single Mo-O surface layer, thus producing intimate O-Mo-C interfaces. An arsenal of complementary technologies, including XPS, atomic-resolution HAADF-STEM, and XAS analysis clearly reveals the existence of O-Mo-C interfaces for these surface-engineered ultrafine nanostructures.

Electrospun, Oriented, Ferromagnetic Ni Fe Nanofibers.

Electrospinning has been used to fabricate ferromagnetic Ni47Fe nanofiber mats that were composed of individual, orientated NiFe nanofibers. The key steps were processing a polyvinylpyrrolidone nanofiber template containing ferric nitrate and nickel acetate metal precursors in Ar at 300°C and then 95% Ar: 5% H at 600°C. The NiFe fibers were nanostructured and contained NiFe nanocrystals with average diameters of ~14 nm.

Improved uniaxial dielectric properties in aligned diisopropylammonium bromide (DIPAB) doped poly(vinylidene difluoride) (PVDF) nanofibers.

Diisopropylammonium bromide (DIPAB) doped poly(vinylidene difluoride) (PVDF) nanofibers (5, 10 and 24 wt% DIPAB doping) with improved and tunable dielectric properties were synthesised electrospinning. DIPAB nanoparticles were grown during the nanofiber formation. X-Ray diffraction (XRD) patterns and Fourier transform infrared spectroscopy (FTIR) proved that electrospinning of DIPAB doped PVDF solutions led to the formation of a highly electro-active β-phase in the nanofibers.

Rapid synthesis of defective and composition-controlled metal chalcogenide nanosheets by supercritical hydrothermal processing.

This study presents a simple one-pot synthesis method to achieve few-layered and defective Mo(S,Se) and (Mo,W)S by using supercritical water with organic reducing agents from simple and less-toxic precursors. This synthesis process is expected to be suitable for preparing other various kinds of TMD solid solutions.

Glucose Sensor Using Redox Active Oligonucleotide-Templated Silver Nanoclusters.

Redox active, photoluminescent silver nanoclusters templated with oligonucleotides were developed for glucose sensing. The silver nanoclusters had a photoluminescent emission at 610 nm that reversibly changed to 530 nm upon oxidation. The reversible emission change was measured with photoluminescent spectroscopy and used to detect HO, which is a by-product of the reaction of glucose with glucose oxidase.

Conducting Copper(I/II)-Metallopolymer for the Electrocatalytic Oxygen Reduction Reaction (ORR) with High Kinetic Current Density.

The oxygen reduction reaction (ORR) is still the most research-intensive aspect of a fuel cell. The sluggish kinetics of the electrocatalysts toward the ORR requires large amounts of platinum to be used as cathode material, which calls for alternatives to replace or minimize the amount of the noble metals used. This study describes the synthesis and complete characterization of a copper metallopolymer (Cu MP) based on a conducting polymer (CP) and single-site catalytic centers for the electrocatalytic ORR.

Copper Metallopolymer Catalyst for the Electrocatalytic Hydrogen Evolution Reaction (HER).

Conjugated polymers with stabilizing coordination units for single-site catalytic centers are excellent candidates to minimize the use of expensive noble metal electrode materials. In this study, conjugated metallopolymer, P[Cu], was synthesized and fully characterized by means of spectroscopical, electrochemical, and photophysical methods. The copper metallopolymer was found to be highly active for the electrocatalytic hydrogen generation (HER) in an aqueous solution at pH 7.

An In Vitro Investigation of Cytotoxic Effects of InP/Zns Quantum Dots with Different Surface Chemistries.

Indium phosphide quantum dots (QDs) passivated with zinc sulphide in a core/shell architecture (InP/ZnS) with different surface chemistries were introduced to RAW 264.7 murine "macrophage-like" cells to understand their potential toxicities. The InP/ZnS quantum dots were conjugated with an oligonucleotide, a carboxylic acid, or an amino-polyethylene glycol ligand, and cell viability and cell proliferation were investigated via a metabolic assay.

Cadmium-Free Quantum Dots as Fluorescent Labels for Exosomes.

Quantum dots are attractive alternatives to organic fluorophores for the purposes of fluorescent labeling and the detection of biomarkers. They can also be made to specifically target a protein of interest by conjugating biomolecules, such as antibodies. However, the majority of the fluorescent labeling using quantum dots is done using toxic materials such as cadmium or lead due to the well-established synthetic processes for these quantum dots.

Acetamide: a low-cost alternative to alkyl imidazolium chlorides for aluminium-ion batteries.

We propose a new electrolyte for rechargeable aluminium-ion batteries based on a room-temperature eutectic mixture of acetamide and aluminium chloride. When diluted with dichloromethane, the electrolyte shows similar cycling performance to the more traditional 1-ethyl-3-methylimidazolium chloride-based electrolytes for a fraction of the cost.

Unraveling aminophosphine redox mechanisms for glovebox-free InP quantum dot syntheses.

The synthesis of colloidal indium phosphide quantum dots (InP QDs) has always been plagued by difficulties arising from limited P3- sources. Being effectively restricted to the highly pyrophoric tris(trimethylsilyl) phosphine (TMS3P) creates complications for the average chemist and presents a significant risk for industrially scaled reactions. The adaptation of tris(dialkylamino) phosphines for these syntheses has garnered attention, as these new phosphines are much safer and can generate nanoparticles with competitive photoluminescence properties to those from (TMS)3P routes.

General Synthetic Strategy for Libraries of Supported Multicomponent Metal Nanoparticles.

Nanoparticles comprising three or more different metals are challenging to prepare. General methods that tackle this challenge are highly sought after as multicomponent metal nanoparticles display favorable properties in applications such as catalysis, biomedicine, and imaging. Herein, we report a practical and versatile approach for the synthesis of nanoparticles composed of up to four different metals.

"Exosomics"-A Review of Biophysics, Biology and Biochemistry of Exosomes With a Focus on Human Breast Milk.

Exosomes are biomolecular nanostructures released from cells. They carry specific biomolecular information and are mainly researched for their exquisite properties as a biomarker source and delivery system. We introduce exosomes in the context of other extracellular vesicles, describe their biophysical isolation and characterisation and discuss their biochemical profiling.

Electrospun Composites of Polycaprolactone and Porous Silicon Nanoparticles for the Tunable Delivery of Small Therapeutic Molecules.

This report describes the use of an electrospun composite of poly(ε-caprolactone) (PCL) fibers and porous silicon (pSi) nanoparticles (NPs) as an effective system for the tunable delivery of camptothecin (CPT), a small therapeutic molecule. Both materials are biodegradable, abundant, low-cost, and most importantly, have no known cytotoxic effects. The composites were treated with and without sodium hydroxide (NaOH) to investigate the wettability of the porous network for drug release and cell viability measurements.

Demonstration of the lack of cytotoxicity of unmodified and folic acid modified graphene oxide quantum dots, and their application to fluorescence lifetime imaging of HaCaT cells.

The authors describe the synthesis of water-soluble and fluorescent graphene oxide quantum dots via acid exfoliation of graphite nanoparticles. The resultant graphene oxide quantum dots (GoQDs) were then modified with folic acid. Folic acid receptors are overexpressed in cancer cells and hence can bind to functionalized graphene oxide quantum dots.

Electroactive Polyhydroquinone Coatings for Marine Fouling Prevention-A Rejected Dynamic pH Hypothesis and a Deceiving Artifact in Electrochemical Antifouling Testing.

Nanometer-thin coatings of polyhydroquinone (PHQ), which release and absorb protons upon oxidation and reduction, respectively, were tested for electrochemically induced anti-biofouling activity under the hypothesis that a dynamic pH environment would discourage fouling. Antifouling tests in artificial seawater using the marine, biofilm-forming bacterium proved the coatings to be ineffective in fouling prevention but revealed a deceiving artifact from the reactive species generated at the counter electrode (CE), even for electrochemical bias potentials as low as |400| mV versus Ag|AgCl. These findings provide valuable information on the preparation of nanothin PHQ coatings and their electrochemical behavior in artificial seawater.

Disperse-and-Collect Approach for the Type-Selective Detection of Matrix Metalloproteinases in Porous Silicon Resonant Microcavities.

We report on the design and testing of photonic biosensors for the type-selective detection of different types of matrix metalloproteinases (MMPs). The ability to detect a panel of different MMP types has important implications for prognosis of wound healing. We combine the immunocapture of MMPs on dispersed magnetic nanoparticles modified with antibodies specific for target MMPs (immuno-magNPs) with subsequent MMP detection upon fluorogenic peptide cleavage in porous silicon resonant microcavity (pSiRM) architectures.

Electrospinning of Photocatalytic Electrodes for Dye-sensitized Solar Cells.

This work demonstrates a protocol to fabricate a fiber-based photoanode for dye-sensitized solar cells, consisting of a light-scattering layer made of electrospun titanium dioxide nanofibers (TiO2-NFs) on top of a blocking layer made of commercially available titanium dioxide nanoparticles (TiO2-NPs). This is achieved by first electrospinning a solution of titanium (IV) butoxide, polyvinylpyrrolidone (PVP), and glacial acetic acid in ethanol to obtain composite PVP/TiO2 nanofibers. These are then calcined at 500 °C to remove the PVP and to obtain pure anatase-phase titania nanofibers.

Apparatus for the investigation of high-temperature, high-pressure gas-phase heterogeneous catalytic and photo-catalytic materials.

A high-temperature, high-pressure, pulsed-gas sampling and detection system has been developed for testing new catalytic and photocatalytic materials for the production of solar fuels. The reactor is fitted with a sapphire window to allow the irradiation of photocatalytic samples from a lamp or solar simulator light source. The reactor has a volume of only 3.