Thermally Stable Capacitive Energy-Density and Colossal Electrocaloric and Pyroelectric Effects of Sm-Doped Pb(MgNb)O-PbTiO Thin Films.

Sm-doped Pb(MgNb)O-PbTiO (Sm-PMN-PT) bulk materials have revealed outstanding ferroelectric and piezoelectric properties due to enhanced local structural heterogeneity. In this study, we further explore the potential of Sm-PMN-PT by fabricating epitaxial thin films by pulsed laser deposition, revealing that Sm doping significantly improves the capacitive energy-storage, piezoelectric, electrocaloric, and pyroelectric properties of PMN-PT thin films. These Sm-PMN-PT thin films exhibit fatigue-free performance up to 10 charge-discharge cycles and maintain thermal stability across a wide temperature range from -40 to 200 °C.

Molecular O Dimers and Lattice Instability in a Perovskite Electrocatalyst.

Structural degradation of oxide electrodes during the electrocatalytic oxygen evolution reaction (OER) is a major challenge in water electrolysis. Although the OER is known to induce changes in the surface layer, little is known about its effect on the bulk of the electrocatalyst and its overall phase stability. Here, we show that under OER conditions, a highly active SrCoO electrocatalyst develops bulk lattice instability, which results in the formation of molecular O dimers inside the bulk and nanoscale amorphization induced via chemo-mechanical coupling.

Double layer acceleration of ions with differently charged states in a laser induced plasma.

The electric field driven acceleration of plasma ions is an intrinsic effect in laser-induced plasma plumes and is responsible for the generation of high-energy ions. At high laser fluences (≥ 2 J/cm), multiply charged ions are formed and affect the plume expansion dynamics. In this paper, we used kinetic energy-resolved mass spectrometry to investigate the relative abundance and kinetic energy distributions of singly- and doubly-charged ions produced by KrF-laser ablation of nine different oxide targets.

A practical guide to pulsed laser deposition.

Nanoscale thin films are widely implemented across a plethora of technological and scientific areas, and form the basis for many advancements that have driven human progress, owing to the high degree of functional tunability based on the chemical composition. Pulsed laser deposition is one of the multiple physical vapour deposition routes to fabricate thin films, employing laser energy to eject material from a target in the form of a plasma. A substrate, commonly a single-crystal oxide, is placed in the path of the plume and acts as a template for the arriving species from the target to coalesce and self-assemble into a thin film.

PLD plasma plume analysis: a summary of the PSI contribution.

Unlabelled: We report on the properties of laser-induced plasma plumes generated by ns pulsed excimer lasers as used for pulsed laser deposition to prepare thin oxide films. A focus is on the time and spatial evolution of chemical species in the plasma plume as well as the mechanisms related to the plume expansion. The overall dynamics of such a plume is governed by the species composition in particular if three or more elements are involved.

High-Sensitivity Ammonia Sensors with Carbon Nanowall Active Material via Laser-Induced Transfer.

Ammonia sensors with high sensitivity, reproducible response, and low cost are of paramount importance for medicine, i.e., being a biomarker to diagnose lung and renal conditions, and agriculture, given that fertilizer application and livestock manure account for more than 80% of NH emissions.

Reconfigurable halide perovskite nanocrystal memristors for neuromorphic computing.

Many in-memory computing frameworks demand electronic devices with specific switching characteristics to achieve the desired level of computational complexity. Existing memristive devices cannot be reconfigured to meet the diverse volatile and non-volatile switching requirements, and hence rely on tailored material designs specific to the targeted application, limiting their universality. "Reconfigurable memristors" that combine both ionic diffusive and drift mechanisms could address these limitations, but they remain elusive.

Linking Brain Structure, Activity, and Cognitive Function through Computation.

Understanding the human brain is a "Grand Challenge" for 21st century research. Computational approaches enable large and complex datasets to be addressed efficiently, supported by artificial neural networks, modeling and simulation. Dynamic generative multiscale models, which enable the investigation of causation across scales and are guided by principles and theories of brain function, are instrumental for linking brain structure and function.

Stimulating effect of hydrostatic pressure on ultrasonic sewage sludge treatment for COD solubilization and methane production.

The performance of ultrasonic treatment was assessed under different hydrostatic pressures for two different waste activated sludges. The impact of pressurized sonication was evaluated based on the degree of disintegration (DD) and the specific methane yield (SMY). An enhancement of DD was observed at an intermediate pressure level (max.

Brain research challenges supercomputing.

Big data obtained from unraveling human brain structure raise processing demands.

Lessons learned from urgent computing in Europe: Tackling the COVID-19 pandemic.

PRACE (Partnership for Advanced Computing in Europe), an international not-for-profit association that brings together the five largest European supercomputing centers and involves 26 European countries, has allocated more than half a billion core hours to computer simulations to fight the COVID-19 pandemic. Alongside experiments, these simulations are a pillar of research to assess the risks of different scenarios and investigate mitigation strategies. While the world deals with the subsequent waves of the pandemic, we present a reflection on the use of urgent supercomputing for global societal challenges and crisis management.

Facile Fabrication of Hybrid Carbon Nanotube Sensors by Laser Direct Transfer.

Ammonia is one of the most frequently produced chemicals in the world, and thus, reliable measurements of different NH concentrations are critical for a variety of industries, among which are the agricultural and healthcare sectors. The currently available technologies for the detection of NH provide accurate identification; however, they are limited by size, portability, and fabrication cost. Therefore, in this work, we report the laser-induced forward transfer (LIFT) of single-walled carbon nanotubes (SWCNTs) decorated with tin oxide nanoparticles (SnO NPs), which act as sensitive materials in chemiresistive NH sensors.

Surface Analysis of Perovskite Oxynitride Thin Films as Photoelectrodes for Solar Water Splitting.

Perovskite oxynitride semiconductors have attracted huge interest recently as promising photoelectrode materials for photoelectrochemical (PEC) water splitting. Depicted by, the extensive studies of the PEC activity of oxynitride powder-based photoelectrodes and/or deposited thin-film electrodes. High-crystalline-quality, oxynitride thin films grown by physical vapor deposition are ideal model systems to study the fundamental physical and chemical properties of the surface of these materials, including their evolution.

Geometrical Frustration and Planar Triangular Antiferromagnetism in Quasi-Three-Dimensional Artificial Spin Architecture.

We present a realization of highly frustrated planar triangular antiferromagnetism achieved in a quasi-three-dimensional artificial spin system consisting of monodomain Ising-type nanomagnets lithographically arranged onto a deep-etched silicon substrate. We demonstrate how the three-dimensional spin architecture results in the first direct observation of long-range ordered planar triangular antiferromagnetism, in addition to a highly disordered phase with short-range correlations, once competing interactions are perfectly tuned. Our work demonstrates how escaping two-dimensional restrictions can lead to new types of magnetically frustrated metamaterials.

Modeling the spread of COVID-19 in Germany: Early assessment and possible scenarios.

The novel coronavirus (SARS-CoV-2), identified in China at the end of December 2019 and causing the disease COVID-19, has meanwhile led to outbreaks all over the globe with about 2.2 million confirmed cases and more than 150,000 deaths as of April 17, 2020. In this work, mathematical models are used to reproduce data of the early evolution of the COVID-19 outbreak in Germany, taking into account the effect of actual and hypothetical non-pharmaceutical interventions.

Effects of ultrasonic reactor design on sewage sludge disintegration.

The impact of ultrasound (US) reactor design on cavitation intensity distribution and disintegration efficiency was studied for sewage sludge pre-treatment, using a US flatbed reactor of variable reaction chamber height (RCH, 20-100 mm). Mapping of cavitation intensity and treatment effects was conducted using (i) hydrophone measurements, (ii) aluminum foil tests, and (iii) soluble chemical oxygen demand (COD) analyses. The overall disintegration efficiency was evaluated based on average COD solubilization.

Black-Si as a Photoelectrode.

The fabrication and characterization of photoanodes based on black-Si (b-Si) are presented using a photoelectrochemical cell in NaOH solution. B-Si was fabricated by maskless dry plasma etching and was conformally coated by tens-of-nm of TiO using atomic layer deposition (ALD) with a top layer of CoO x cocatalyst deposited by pulsed laser deposition (PLD). Low reflectivity R < 5 % of b-Si over the entire visible and near-IR ( λ < 2   μ m) spectral range was favorable for the better absorption of light, while an increased surface area facilitated larger current densities.

Examining the surface evolution of LaTiON an oxynitride solar water splitting photocatalyst.

LaTiON oxynitride thin films are employed to study the surface modifications at the solid-liquid interface that occur during photoelectrocatalytic water splitting. Neutron reflectometry and grazing incidence x-ray absorption spectroscopy were utilised to distinguish between the surface and bulk signals, with a surface sensitivity of 3 nm. Here we show, contrary to what is typically assumed, that the A cations are active sites that undergo oxidation at the surface as a consequence of the water splitting process.

Systematic Material Study Reveals TiNb O as a Model Wide-Bandgap Photoanode Material for Solar Water Splitting.

This work reveals that photoanodes based on TiNb O (TNO) powder show remarkable water-oxidation properties including nearly ideal charge-transfer and charge-injection efficiencies. Furthermore, using a simplified photoanode construction and carefully surveying the structural and morphological characteristics of oriented and polycrystalline thin films and powder-based samples revealed that the water-splitting kinetics of TNO is negligibly effected by surface morphology; instead, internal grain boundaries likely play a driving role. The current powder-based TNO photoanodes exhibit ideal water-oxidation kinetics and oxidize water at minimal applied biases under illumination; consequently, TNO exhibits an early onset photocurrent voltage (0.

Assessment of sonotrode and tube reactors for ultrasonic pre-treatment of two different sewage sludge types.

The effectiveness of tube and sonotrode reactors for the sonication of sewage sludge under identical conditions was compared for the first time. Despite the considerable structural differences, sonication with each ultrasonic reactor led to an accelerated degradation rate and an increased methane production within the first five days for the majority of the sewage sludge samples tested. On closer examination, however, it becomes clear that the investigated sonication systems are not equally suitable for the substrates considered.

The Human Brain Project-Synergy between neuroscience, computing, informatics, and brain-inspired technologies.

The Human Brain Project (HBP) is a European flagship project with a 10-year horizon aiming to understand the human brain and to translate neuroscience knowledge into medicine and technology. To achieve such aims, the HBP explores the multilevel complexity of the brain in space and time; transfers the acquired knowledge to brain-derived applications in health, computing, and technology; and provides shared and open computing tools and data through the HBP European brain research infrastructure. We discuss how the HBP creates a transdisciplinary community of researchers united by the quest to understand the brain, with fascinating perspectives on societal benefits.

Impact of ultrasound-induced cavitation on the fluid dynamics of water and sewage sludge in ultrasonic flatbed reactors.

The fluid dynamics of water, thickened waste activated sludge (WAS, total solids concentration 4.4%) and digested sludge (DS, total solids concentration 2.5%) within a lab-scale ultrasonic flatbed reactor were experimentally investigated.