Photonic and electrochemical biosensors for near-patient tests-a critical comparison.

Research into diagnostic biosensors is a vibrant field that combines scientific challenge with translational opportunities; innovation in healthcare is of great societal interest and is an essential element of future healthcare provision. Photonic and electrochemical biosensors are the dominant modalities, both scientifically and commercially, yet the two scientific communities largely remain separated and siloed. It seems astute to better understand what the two fields can learn from one another so as to progress the key scientific, translational, and commercial challenges.

Protocol for Therapeutic Drug Monitoring Within the Clinical Range Using Mid-infrared Spectroscopy.

Therapeutic drug monitoring (TDM), which involves measuring drug levels in patients' body fluids, is an important procedure in clinical practice. However, the analysis technique currently used, i.e.

Lasing from a Large-Area 2D Material Enabled by a Dual-Resonance Metasurface.

Semiconducting transition metal dichalcogenides (TMDs) have gained significant attention as a gain medium for nanolasers, owing to their unique ability to be easily placed and stacked on virtually any substrate. However, the atomically thin nature of the active material in existing TMD lasers and the limited size due to mechanical exfoliation presents a challenge, as their limited output power makes it difficult to distinguish between true laser operation and other "laser-like" phenomena. Here, we present room temperature lasing from a large-area tungsten disulfide (WS) monolayer, grown by a wafer-scale chemical vapor deposition (CVD) technique.

Phase noise matching in resonant metasurfaces for intrinsic sensing stability.

Interferometry offers a precise means of interrogating resonances in dielectric and plasmonic metasurfaces, surpassing spectrometer-imposed resolution limits. However, interferometry implementations often face complexity or instability issues due to heightened sensitivity. Here, we address the necessity for noise compensation and tolerance by harnessing the inherent capabilities of photonic resonances.

On the reproducibility of electron-beam lithographic fabrication of photonic nanostructures.

Photonic nanostructures such as gratings and ring resonators have become ubiquitous building blocks in Photonics. For example, they are used in filters, they resonantly enhance signals and act as grating couplers. Much research effort is invested in using such structures to create novel functionalities, which often employs electron-beam lithography.

Noise Tolerant Photonic Bowtie Grating Environmental Sensor.

Resonant photonic refractive index sensors have made major advances based on their high sensitivity and contact-less readout capability, which is advantageous in many areas of science and technology. A major issue for the technological implementation of such sensors is their response to external influences, such as vibrations and temperature variations; the more sensitive a sensor, the more susceptible it also becomes to external influences. Here, we introduce a novel bowtie-shaped sensor that is highly responsive to refractive index variations while compensating for temperature changes and mechanical (linear and angular) vibrations.

A Fully Metaoptical Zoom Lens with a Wide Range.

Metalenses are typically designed for a fixed focal length, restricting their functionality to static scenarios. Various methods have been introduced to achieve the zoom function in metalenses. These methods, however, have a very limited zoom range, or they require additional lenses to achieve direct imaging.

Fano Resonance-Assisted All-Dielectric Array for Enhanced Near-Field Optical Trapping of Nanoparticles.

Near-field optics can overcome the diffraction limit by creating strong optical gradients to enable the trapping of nanoparticles. However, it remains challenging to achieve efficient, stable trapping without heating and thermal effects. Dielectric structures have been used to address this issue but usually offer weak trap stiffness.

Bio-inspired polydopamine layer as a versatile functionalisation protocol for silicon-based photonic biosensors.

Photonic biosensors have made major advances in recent years, achieving very high sensitivity, and progressing towards point-of-care deployment. By using photonic resonances, sensors can be label-free, which is particularly attractive for a low-cost technological realisation. A key remaining issue is the biological interface and the efficient and reliable immobilisation of binder molecules such as antibodies; many protocols are currently in use that have led to widely varying sensor performance.

Nanophotonic and hydrogel-based diagnostic system for the monitoring of chronic wounds.

Chronic wounds present a major healthcare burden, yet most wounds are only assessed superficially, and treatment is rarely based on the analysis of wound biomarkers. This lack of analysis is based on the fact that sampling of wound biomarkers is typically invasive, leading to a disruption of the wound bed while biomarker detection and quantification is performed in a remote laboratory, away from the point of care. Here, we introduce the diagnostic element of a novel theranostic system that can non-invasively sample biomarkers without disrupting the wound and that can perform biomarker quantification at the point of care, on a short timescale.

Multiplexed Near-Field Optical Trapping Exploiting Anapole States.

Optical tweezers have had a major impact on bioscience research by enabling the study of biological particles with high accuracy. The focus so far has been on trapping individual particles, ranging from the cellular to the molecular level. However, biology is intrinsically heterogeneous; therefore, access to variations within the same population and species is necessary for the rigorous understanding of a biological system.

Photonic Characterisation of Indium Tin Oxide as a Function of Deposition Conditions.

Indium tin oxide (ITO) has recently gained prominence as a photonic nanomaterial, for example, in modulators, tuneable metasurfaces and for epsilon-near-zero (ENZ) photonics. The optical properties of ITO are typically described by the Drude model and are strongly dependent on the deposition conditions. In the current literature, studies often make several assumptions to connect the optically measured material parameters to the electrical properties of ITO, which are not always clear, nor do they necessarily apply.

Perturbation approach to improve the angular tolerance of high-Q resonances in metasurfaces.

The interest in high quality factor (high-Q) resonances in metasurfaces has been rekindled with the rise of the bound states in the continuum (BIC) paradigm, which describes resonances with apparently limitlessly high quality-factors (Q-factors). The application of BICs in realistic systems requires the consideration of the angular tolerance of resonances, however, which is an issue that has not yet been addressed. Here, we develop an ab-initio model, based on temporal coupled mode theory, to describe the angular tolerance of distributed resonances in metasurfaces that support both BICs and guided mode resonances (GMRs).

Treatment strategies in patients with gynecological sarcoma: Results of the prospective intergroup real-world registry for gynecological sarcoma in Germany (REGSA-NOGGO RU1).

Objective: Gynecological sarcomas account for 3% of all gynecological malignancies and are associated with a poor prognosis. Due to the rarity and heterogeneity of gynecological sarcomas there is still no consensus on optimal therapeutic strategies. This study's objective was to describe the treatment strategies used in patients with gynecological sarcomas in the primary course of disease.

Exploring the fundamental limit of antimicrobial susceptibility by near-single-cell electrical impedance spectroscopy.

Many novel susceptibility tests are being developed to tackle the worldwide problem of antimicrobial resistance (AMR). The key driver behind these developments, that is the need to reduce the response time, requires an understanding of which bacterial characteristic needs to be monitored to provide a rapid and ideally universal signature of susceptibility. Many characteristics have already been studied, most notably bacterial growth, metabolism and motility.

Metasurface-enhanced mid-infrared spectroscopy in the liquid phase.

Vibrational spectroscopy is an important tool in chemical and biological analysis. A key issue when applying vibrational spectroscopy to dilute liquid samples is the inherently low sensitivity caused by short interaction lengths and small extinction coefficients, combined with low target molecule concentrations. Here, we introduce a novel type of surface-enhanced infrared absorption spectroscopy based on the resonance of a dielectric metasurface.

Photonic crystals umbrella for thermal desalination: simulation study.

For sustainable water desalination, there is a worldwide push towards solar thermal desalination with the objective to limit the amount of consumed energy in other desalination technologies and maximize the resulting freshwater from saline water. Here, we demonstrate a photonic crystals solar umbrella that covers the saline water surface, demanding to absorb all the incident electromagnetic wave and remit it as greater wavelengths in the range of mid-infrared (MIR) to be highly absorbed and localized close to the water surface. The temperature of the saline water with a refractive index of 1.

Antibiotic-functionalized gold nanoparticles for the detection of active β-lactamases.

Antimicrobial resistance (AMR) continues to threaten the effective treatment and prevention of bacterial infections. The spread of resistant infections is accelerated by the lack of fast and cost-effective tests for the detection of AMR at the point-of-care. We aimed to address this challenge by developing a diagnostic tool to detect one of the major forms of AMR, the β-lactamase enzymes.

Detection of paracetamol binding to albumin in blood serum using 2D-IR spectroscopy.

Binding of drugs to blood serum proteins can influence both therapeutic efficacy and toxicity. The ability to measure the concentrations of protein-bound drug molecules quickly and with limited sample preparation could therefore have considerable benefits in biomedical and pharmaceutical applications. Vibrational spectroscopies provide data quickly but are hampered by complex, overlapping protein amide I band profiles and water absorption.

Beyond : The Importance of the Resonance Amplitude for Photonic Sensors.

Resonant photonic sensors are enjoying much attention based on the worldwide drive toward personalized healthcare diagnostics and the need to better monitor the environment. Recent developments exploiting novel concepts such as metasurfaces, bound states in the continuum, and topological sensing have added to the interest in this topic. The drive toward increasingly higher quality ()-factors, combined with the requirement for low costs, makes it critical to understand the impact of realistic limitations such as losses on photonic sensors.

Transition Metal Dichalcogenide Dimer Nanoantennas for Tailored Light-Matter Interactions.

Transition metal dichalcogenides have emerged as promising materials for nanophotonic resonators because of their large refractive index, low absorption within a large portion of the visible spectrum, and compatibility with a wide range of substrates. Herein, we use these properties to fabricate WS double-pillar nanoantennas in a variety of geometries enabled by the anisotropy in the crystal structure. Using dark-field spectroscopy, we reveal multiple Mie resonances, to which we couple WSe monolayer photoluminescence and achieve Purcell enhancement and an increased fluorescence by factors up to 240 for dimer gaps of 150 nm.

Fundamental limits and design principles of doublet metalenses.

Metalenses are nanostructured surfaces with great potential for delivering miniaturized and integrated optical systems. A key property of metalenses is that, by using a double layer configuration, or doublet, they can achieve both diffraction-limited resolution and wide field-of-view imaging. The physical operation and limitations of such doublet systems, however, are still not fully understood, and designs are still based on numerical optimization of the phase profiles.

Dielectric nanohole array metasurface for high-resolution near-field sensing and imaging.

Dielectric metasurfaces support resonances that are widely explored both for far-field wavefront shaping and for near-field sensing and imaging. Their design explores the interplay between localised and extended resonances, with a typical trade-off between Q-factor and light localisation; high Q-factors are desirable for refractive index sensing while localisation is desirable for imaging resolution. Here, we show that a dielectric metasurface consisting of a nanohole array in amorphous silicon provides a favourable trade-off between these requirements.