Generation of fuel from CO2 saturated liquids using a p-Si nanowire ‖ n-TiO2 nanotube array photoelectrochemical cell.

Light-driven, electrically biased pn junction photoelectrochemical (PEC) cells immersed in an electrolyte of CO(2) saturated 1.0 M NaHCO(3) are investigated for use in generating hydrocarbon fuels. The PEC photocathode is comprised of p-type Si nanowire arrays, with and without copper sensitization, while the photoanode is comprised of n-type TiO(2) nanotube array films.

Synthesis and applications of electrochemically self-assembled titania nanotube arrays.

Highly ordered vertically oriented TiO(2) nanotube arrays fabricated by electrochemical anodization offer a large surface area architecture with precisely controllable nanoscale features. These nanotubes have shown remarkable properties in a variety of applications including, for example, their use as hydrogen sensors, in the photoelectrochemical generation of hydrogen, dye-sensitized and solid-state heterojunction solar cells, photocatalytic reduction of carbon dioxide into hydrocarbons, and as a novel drug delivery platform. Herein we consider the development of the various nanotube array synthesis techniques, different applications of the TiO(2) nanotube arrays, unresolved issues, and possible future research directions.

Ta3N5 nanotube arrays for visible light water photoelectrolysis.

Tantalum nitride (Ta3N5) has a band gap of approximately 2.07 eV, suitable for collecting more than 45% of the incident solar spectrum energy. We describe a simple method for scale fabrication of highly oriented Ta3N5 nanotube array films, by anodization of tantalum foil to achieve vertically oriented tantalum oxide nanotube arrays followed by a 700 degrees C ammonia anneal for sample crystallization and nitridation.

Whole genome expression analysis reveals differential effects of TiO2 nanotubes on vascular cells.

The response of primary human endothelial (ECs) and vascular smooth muscle cells (VSMCs) to TiO2 nanotube arrays is studied through gene expression analysis. Microarrays revealed that nanotubes enhanced EC proliferation and motility, decreased VSMC proliferation, and decreased expression of molecules involved in inflammation and coagulation in both cell types. Networks generated from significantly affected genes suggest that cells may be sensing nanotopographical cues via pathways previously implicated in sensing shear stress.

Long-term small molecule and protein elution from TiO2 nanotubes.

In this study, TiO(2) nanotubes of various dimensions were used to elute albumin, a large protein molecule, as well as sirolimus and paclitaxel, common small molecule drugs. The nanotubes controlled small molecule diffusion for weeks and large molecule diffusion for a month. Drug eluted from the nanotubes was bioactive and decreased cell proliferation in vitro.

High-rate solar photocatalytic conversion of CO2 and water vapor to hydrocarbon fuels.

Efficient solar conversion of carbon dioxide and water vapor to methane and other hydrocarbons is achieved using nitrogen-doped titania nanotube arrays, with a wall thickness low enough to facilitate effective carrier transfer to the adsorbing species, surface-loaded with nanodimensional islands of cocatalysts platinum and/or copper. All experiments are conducted in outdoor sunlight at University Park, PA. Intermediate reaction products, hydrogen and carbon monoxide, are also detected with their relative concentrations underlying hydrocarbon production rates and dependent upon the nature of the cocatalysts on the nanotube array surface.

The effect of TiO2 nanotubes on endothelial function and smooth muscle proliferation.

In this study we investigate the effects of nanotubular titanium oxide (TiO(2)) surfaces on vascular cells. EC and VSMC response to nanotubes was investigated through immunofluorescence staining, scanning electron microscopy, 5-ethynyl-2'-deoxyuridine proliferation assays, and prostaglandin I(2) (PGI(2)) enzyme immunoassays. We found that the nanotubular surface significantly enhances EC proliferation and secretion of PGI(2).

Vertically aligned single crystal TiO2 nanowire arrays grown directly on transparent conducting oxide coated glass: synthesis details and applications.

Single-crystal one-dimensional (1D) semiconductor architectures are important in materials-based applications requiring a large surface area, morphological control, and superior charge transport. Titania has widespread utility in applications including photocatalysis, photochromism, photovoltaics, and gas sensors. While considerable efforts have focused on the preparation of 1D TiO2, no methods have been available to grow crystalline nanowire arrays directly onto transparent conducting oxide (TCO) substrates, greatly limiting the performance of TiO2 photoelectrochemical devices.

P-type Cu--Ti--O nanotube arrays and their use in self-biased heterojunction photoelectrochemical diodes for hydrogen generation.

Copper and titanium remain relatively plentiful in the earth's crust; hence, their use for large-scale solar energy conversion technologies is of significant interest. We describe fabrication of vertically oriented p-type Cu-Ti-O nanotube array films by anodization of copper rich (60% to 74%) Ti metal films cosputtered onto fluorine doped tin oxide (FTO) coated glass. Cu-Ti-O nanotube array films 1 mum thick exhibit external quantum efficiencies up to 11%, with a spectral photoresponse indicating that the complete visible spectrum, 380 to 885 nm, contributes significantly to the photocurrent generation.

Highly efficient solar cells using TiO(2) nanotube arrays sensitized with a donor-antenna dye.

Donor antenna dyes provide an exciting route to improving the efficiency of dye sensitized solar cells owing to their high molar extinction coefficients and the effective spatial separation of charges in the charge-separated state, which decelerates the recombination of photogenerated charges. Vertically oriented TiO(2) nanotube arrays provide an optimal material architecture for photoelectrochemical devices because of their large internal surface area, lower recombination losses, and vectorial charge transport along the nanotube axis. In this study, the results obtained by sensitizing TiO(2) nanotube arrays with the donor antenna dye Ru-TPA-NCS are presented.

The effects of cell density and device arrangement on the behavior of macroencapsulated beta-cells.

Over the last several decades, considerable research has focused on the development of cell encapsulation technology to treat a number of diseases, especially type 1 diabetes. One of the key advantages of cell encapsulation is that it permits the use of xenogenic tissue, particularly animal-derived cell lines. This is an attractive idea, because it circumvents the issue of a limited human organ supply.

Decreased Staphylococcus epidermis adhesion and increased osteoblast functionality on antibiotic-loaded titania nanotubes.

Bacterial infection is one of the most common problems after orthopedic implant surgery. If not prevented, bacterial infection can result in serious and life threatening conditions such as osteomyelitis. Thus, in order to reduce chances of such serious complication, patients are often subjected to antibiotic drug therapy for 6-8 weeks after initial surgery.

Osteogenic differentiation of marrow stromal cells cultured on nanoporous alumina surfaces.

A major goal in orthopedic biomaterials research is to design implant surfaces, which will enhance osseointegration in vivo. Several microscale as well as nanoscale architectures have been shown to significantly affect the functionality of bone cells i.e.

Anodic growth of highly ordered TiO2 nanotube arrays to 134 microm in length.

Described is the fabrication of self-aligned highly ordered TiO(2) nanotube arrays by potentiostatic anodization of Ti foil having lengths up to 134 mum, representing well over an order of magnitude increase in length thus far reported. We have achieved the very long nanotube arrays in fluoride ion containing baths in combination with a variety of nonaqueous organic polar electrolytes including dimethyl sulfoxide, formamide, ethylene glycol, and N-methylformamide. Depending on the anodization voltage, pore diameters of the resulting nanotube arrays range from 20 to 150 nm.