Band Alignment and Surface Photo-Voltage Analysis of C-Si/Sio/Poly-Silicon Passivating-Contact Stacks Through X-Ray Photoelectron Spectroscopy.

Ultrathin SiO layers and c-Si/SiO interfaces find application in tunnel-oxide passivated contacts (TOPcon) for high-efficiency silicon solar cells. Here, we investigate their detailed microscopic properties, with specific attention for the case of c-Si(100) substrates, capped either by p-type or n-type poly-silicon layers [c-Si/SiO/poly-Si (p) or c-Si/SiO/poly-Si (n)]. Our focus is on the effects of the substrate preparation conditions (either by a dry-plasma or wet SiO process) and the high-temperature annealing step (as required for the poly-Si crystallization) on the SiO stoichiometry and its microscopic structure.

Enhanced cation interaction in perovskites for efficient tandem solar cells with silicon.

To achieve the full potential of monolithic perovskite/silicon tandem solar cells, crystal defects and film inhomogeneities in the perovskite top cell must be minimized. We discuss the use of methylenediammonium dichloride as an additive to the perovskite precursor solution, resulting in the incorporation of in situ-formed tetrahydrotriazinium (THTZ-H) into the perovskite lattice upon film crystallization. The cyclic nature of the THTZ-H cation enables a strong interaction with the lead octahedra of the perovskite lattice through the formation of hydrogen bonds with iodide in multiple directions.

Sublimed C for efficient and repeatable perovskite-based solar cells.

Thermally evaporated C is a near-ubiquitous electron transport layer in state-of-the-art p-i-n perovskite-based solar cells. As perovskite photovoltaic technologies are moving toward industrialization, batch-to-batch reproducibility of device performances becomes crucial. Here, we show that commercial as-received (99.

Pathways toward commercial perovskite/silicon tandem photovoltaics.

Perovskite/silicon tandem solar cells offer a promising route to increase the power conversion efficiency of crystalline silicon (c-Si) solar cells beyond the theoretical single-junction limitations at an affordable cost. In the past decade, progress has been made toward the fabrication of highly efficient laboratory-scale tandems through a range of vacuum- and solution-based perovskite processing technologies onto various types of c-Si bottom cells. However, to become a commercial reality, the transition from laboratory to industrial fabrication will require appropriate, scalable input materials and manufacturing processes.

Efficient and reliable encapsulation for perovskite/silicon tandem solar modules.

Perovskite/silicon tandem solar cells have a tremendous potential to boost renewable electricity production thanks to their very high performance combined with promising cost structure. However, for actual field deployment, any solar cell technology needs to be assembled into modules, where the associated processes involve several challenges that may affect both the performance and stability of the devices. For instance, due to its hygroscopic nature, ethylene vinyl acetate (EVA) is incompatible with perovskite-based photovoltaics.

Enhanced optoelectronic coupling for perovskite/silicon tandem solar cells.

Monolithic perovskite/silicon tandem solar cells are of great appeal as they promise high power conversion efficiencies (PCEs) at affordable cost. In state-of-the-art tandems, the perovskite top cell is electrically coupled to a silicon heterojunction bottom cell by means of a self-assembled monolayer (SAM), anchored on a transparent conductive oxide (TCO), which enables efficient charge transfer between the subcells. Yet reproducible, high-performance tandem solar cells require energetically homogeneous SAM coverage, which remains challenging, especially on textured silicon bottom cells.

Life on the Urbach Edge.

The Urbach energy is an expression of the static and dynamic disorder in a semiconductor and is directly accessible via optical characterization techniques. The strength of this metric is that it elegantly captures the optoelectronic performance potential of a semiconductor in a single number. For solar cells, the Urbach energy is found to be predictive of a material's minimal open-circuit-voltage deficit.

Efficient and stable perovskite-silicon tandem solar cells through contact displacement by MgF.

The performance of perovskite solar cells with inverted polarity (p-i-n) is still limited by recombination at their electron extraction interface, which also lowers the power conversion efficiency (PCE) of p-i-n perovskite-silicon tandem solar cells. A MgF interlayer with thickness of ~1 nanometer at the perovskite/C interface favorably adjusts the surface energy of the perovskite layer through thermal evaporation, which facilitates efficient electron extraction and displaces C from the perovskite surface to mitigate nonradiative recombination. These effects enable a champion open-circuit voltage of 1.

Damp heat-stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions.

If perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs) are to be commercialized, they must achieve long-term stability, which is usually assessed with accelerated degradation tests. One of the persistent obstacles for PSCs has been successfully passing the damp-heat test (85°C and 85% relative humidity), which is the standard for verifying the stability of commercial photovoltaic (PV) modules. We fabricated damp heat-stable PSCs by tailoring the dimensional fragments of two-dimensional perovskite layers formed at room temperature with oleylammonium iodide molecules; these layers passivate the perovskite surface at the electron-selective contact.

Scaled Deposition of TiC MXene on Complex Surfaces: Application Assessment as Rear Electrodes for Silicon Heterojunction Solar Cells.

Two-dimensional transition metal carbides (MXenes) are of great interest as electrode materials for a variety of applications, including solar cells, due to their tunable optoelectronic properties, high metallic conductivity, and attractive solution processability. However, thus far, MXene electrodes have only been exploited for lab-scale device applications. Here, to demonstrate the potential of MXene electrodes at an industry-relevant level, we implemented a scalable spray coating technique to deposit highly conductive (.

Tin Oxide Electron-Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells.

Perovskite solar cells (PSCs) have become a promising photovoltaic (PV) technology, where the evolution of the electron-selective layers (ESLs), an integral part of any PV device, has played a distinctive role to their progress. To date, the mesoporous titanium dioxide (TiO )/compact TiO stack has been among the most used ESLs in state-of-the-art PSCs. However, this material requires high-temperature sintering and may induce hysteresis under operational conditions, raising concerns about its use toward commercialization.

Enhanced optical path and electron diffusion length enable high-efficiency perovskite tandems.

Tandem solar cells involving metal-halide perovskite subcells offer routes to power conversion efficiencies (PCEs) that exceed the single-junction limit; however, reported PCE values for tandems have so far lain below their potential due to inefficient photon harvesting. Here we increase the optical path length in perovskite films by preserving smooth morphology while increasing thickness using a method we term boosted solvent extraction. Carrier collection in these films - as made - is limited by an insufficient electron diffusion length; however, we further find that adding a Lewis base reduces the trap density and enhances the electron-diffusion length to 2.

Copula Based Classifier Fusion Under Statistical Dependence.

We consider the problem of fusing probability scores from a set of classifiers to estimate a final fused probability score. Our interest is in scenarios where the classifiers are statistically dependent. To that end, we propose a new classifier fusion approach that is data driven and founded on the statistical theory of copulas.