Demonstration of stable, long-term operation of a nanosecond pulsed DPSSL at 10 J, 100 Hz.

We report on stable, long-term operation of a diode-pumped solid-state laser (DPSSL) amplifying 15 ns pulses at 1029.5 nm wavelength to 10 J energy at 100 Hz pulse rate, corresponding to 1 kW average power, with 25.4% optical-to-optical efficiency.

Improved stability second harmonic conversion of a diode-pumped Yb:YAG laser at the 0.5 kW level.

We report on efficient and stable, type-I phase-matched second harmonic conversion of a nanosecond high-energy, diode-pumped, Yb:YAG laser. With a frequency-doubling crystal in an enclosed, temperature controller with optical windows, 0.5% energy stability was achieved for approximately half an hour.

Generation of Joule-level green bursts of nanosecond pulses from a DPSSL amplifier.

A new approach to generation of a burst of high-energy green pulses by placing a high-energy multi-slab Yb:YAG DPSSL amplifier and SHG crystal inside a regenerative cavity is presented. In a proof-of-concept test, stable generation of a burst of six green (515 nm) pulses, each 10 ns in duration and separated by 29.4 ns (34 MHz), with 2.

Realistic operation of two residential cordwood-fired outdoor hydronic heater appliances-Part 3: Optical properties of black and brown carbon emissions.

Residential biomass combustion is a source of carbonaceous aerosol. Inefficient combustion, particularly of solid fuels produces large quantities of black and brown carbon (BC and BrC). These particle types are important as they have noted effects on climate forcing and human health.

Characterization of in-stack particulate emissions from residential wood hydronic heater appliances under different combustion conditions.

In the current work, we provide measurements of size-resolved particle number concentration (PNC), particle mass concentration (PMC), lung-deposited surface area (LDSA), and black carbon (BC) concentration for three biomass fired hydronic heaters during operation in four different combustion conditions. The appliances include one woodchip-fueled hydronic heater and two outdoor cordwood-fueled hydronic heaters. The operating conditions included startup, low output, high output, and burnout.

Realistic operation of two residential cordwood-fired outdoor hydronic heater appliances-Part 1: Particulate and gaseous emissions.

This study investigated how heat demand and fuel loading affect the emissions from outdoor wood-fired hydronic heaters by testing two such appliances using an integrated-duty cycle test method. This test included transient operating conditions, such as cold and hot-starts and modulation between 15 and 100% of maximum rated output. Emission values indicate transient operating conditions produce higher emissions than steady state operation.

Realistic operation of two residential cordwood-fired outdoor hydronic heater appliances-Part 2: Particle number and size.

The use of wood as a fuel for home heating is a concern from an environmental health and safety perspective as biomass combustion appliances emit high concentrations of particulate matter. Wood burning significantly contributes to wintertime particulate matter concentrations in many states in the northern United States. Of particular concern are outdoor wood-fired hydronic heaters.

150 J DPSSL operating at 1.5 kW level.

We report on obtaining output energy of 146 J in 10 ns long pulses at 10 Hz repetition rate from Bivoj, a multi-Joule multi-slab cryogenic gas-cooled diode pumped solid state laser, by overcoming its damage threshold bottleneck. This is a 40% energy and power increase of the laser system in comparison to our previous publication and to the most powerful multi-Joule high power laser system.

Second and third harmonic conversion of a kilowatt average power, 100-J-level diode pumped Yb:YAG laser in large aperture LBO.

We report on the successful demonstration of second and third harmonic conversion of a high pulse energy, high average power 1030 nm diode pumped Yb-doped yttrium aluminum garnet (Yb:YAG) nanosecond pulsed laser in a large aperture lithium triborate (LBO) crystal. We demonstrated generation of 59.7 J at 10 Hz (597 W) at 515 nm (second harmonic) and of 65.

Effect of Thermal Storage on the Emissions and Efficiency Performance of a Wood-Pellet-Fired Residential Boiler.

Wood pellet boilers for residential heating applications offer the promise of low emissions, high efficiency, and automatic operation. However, when operated in the field, these units operate often at very low loads causing them to cycle. In this study, the performance of a 25 kW modern pellet boiler under emulated field conditions and fixed nominal loads of 15 and 100% has been studied in a lab-with and without a buffer tank.

Stable high-energy, high-repetition-rate, frequency doubling in a large aperture temperature-controlled LBO at 515  nm.

We report on frequency doubling of high-energy, high-repetition-rate ns pulses from a cryogenically gas cooled, multi-slab Yb:YAG laser system, using a type-I phase-matched lithium triborate (LBO) crystal. Pulse energy of 4.3 J was extracted at 515 nm for a fundamental input of 5.

Evaluation of alternative filter media for particulate matter emission testing of residential wood heating devices.

Unlabelled: The performance of Teflon-coated glass fiber filter media (Pallflex Emfab TX40) is evaluated for particulate matter (PM) sampling of residential wood heating devices in a dilution tunnel. Thirty samples of varying duration and PM loading and concentration were collected from an U.S.

Efficient high-harmonic generation from a stable and compact ultrafast Yb-fiber laser producing 100 μJ, 350 fs pulses based on bendable photonic crystal fiber.

The development of an Yb-fiber-based chirped-pulse amplification system and the performance in the generation of extreme ultraviolet (EUV) radiation by high-harmonic generation is reported. The fiber laser produced 100 μJ, 350 fs output pulses with diffraction-limited beam quality at a repetition rate of 16.7 kHz.

100  J-level nanosecond pulsed diode pumped solid state laser.

We report on the successful demonstration of a 100 J-level, diode pumped solid state laser based on cryogenic gas cooled, multi-slab ceramic Yb:YAG amplifier technology. When operated at 175 K, the system delivered a pulse energy of 107 J at a 1 Hz repetition rate and 10 ns pulse duration, pumped by 506 J of diode energy at 940 nm, corresponding to an optical-to-optical efficiency of 21%. To the best of our knowledge, this represents the highest energy obtained from a nanosecond pulsed diode pumped solid state laser.

DiPOLE: a 10 J, 10 Hz cryogenic gas cooled multi-slab nanosecond Yb:YAG laser.

The Diode Pumped Optical Laser for Experiments (DiPOLE) project at the Central Laser Facility aims to develop a scalable, efficient high pulse energy diode pumped laser amplifier system based on cryogenic gas cooled, multi-slab ceramic Yb:YAG technology. We present recent results obtained from a scaled down prototype laser system designed for operation at 10 Hz pulse repetition rate. At 140 K, the system generated 10.

Gas jet structure influence on high harmonic generation.

Gas jets used as sources for high harmonic generation (HHG) have a complex three-dimensional density and velocity profile. This paper describes how the profile influences the generation of extreme-UV light. As the position of the laser focus is varied along the jet flow axis, we show that the intensity of the output radiation varies by approximately three times, with the highest flux being observed when the laser is focused into the Mach disc.

Modal effects on pump-pulse propagation in an Ar-filled capillary.

Accurate three-dimensional modelling of nonlinear pulse propagation within a gas-filled capillary is essential for understanding and improving the XUV yield in high harmonic generation. We introduce both a new model based on a multimode generalized nonlinear Schrödinger equation and a novel spatio-spectral measurement technique to which the model can be compared. The theory shows excellent agreement with the measured output spectrum and the spatio-spectral measurement reveals that the model correctly predicts higher order mode contributions to spectral broadening of the pulse.