Silver/gold nanoalloy implant coatings with antibiofilm activity pH-triggered silver ion release.

Implant infections are a major challenge for the healthcare system. Biofilm formation and increasing antibiotic resistance of common bacteria cause implant infections, leading to an urgent need for alternative antibacterial agents. In this study, the antibiofilm behaviour of a coating consisting of a silver (Ag)/gold (Au) nanoalloy is investigated.

Pharmaceutical Quality by Design Approach to Develop High-Performance Nanoparticles for Magnetic Hyperthermia.

Magnetic hyperthermia holds significant therapeutic potential, yet its clinical adoption faces challenges. One obstacle is the large-scale synthesis of high-quality superparamagnetic iron oxide nanoparticles (SPIONs) required for inducing hyperthermia. Robust and scalable manufacturing would ensure control over the key quality attributes of SPIONs, and facilitate clinical translation and regulatory approval.

Phase Engineering via Aluminum Doping Enhances the Electrochemical Stability of Lithium-Rich Cobalt-Free Layered Oxides for Lithium-Ion Batteries.

Lithium-rich, cobalt-free oxides are promising potential positive electrode materials for lithium-ion batteries because of their high energy density, lower cost, and reduced environmental and ethical concerns. However, their commercial breakthrough is hindered because of their subpar electrochemical stability. This work studies the effect of aluminum doping on LiNiMnO as a lithium-rich, cobalt-free layered oxide.

Noise-dependent bias in quantitative STEM-EMCD experiments revealed by bootstrapping.

Electron magnetic circular dichroism (EMCD) is a powerful technique for estimating element-specific magnetic moments of materials on nanoscale with the potential to reach atomic resolution in transmission electron microscopes. However, the fundamentally weak EMCD signal strength complicates quantification of magnetic moments, as this requires very high precision, especially in the denominator of the sum rules. Here, we employ a statistical resampling technique known as bootstrapping to an experimental EMCD dataset to produce an empirical estimate of the noise-dependent error distribution resulting from application of EMCD sum rules to bcc iron in a 3-beam orientation.

Highly Efficient Near-IR Photothermal Microneedles with Flame-Made Plasmonic Nanoaggregates for Reduced Intradermal Nanoparticle Deposition.

Near-infrared (NIR) photothermal therapy by microneedles (MNs) exhibits high potential against skin diseases. However, high costs, photobleaching of organic agents, low long-term stability, and potential nanotoxicity limit the clinical translation of photothermal MNs. Here, photothermal MNs are developed by utilizing Au nanoaggregates made by flame aerosol technology and incorporated in water-insoluble polymer matrix to reduce intradermal nanoparticle (NP) deposition.

Single scan STEM-EMCD in 3-beam orientation using a quadruple aperture.

The need to acquire multiple angle-resolved electron energy loss spectra (EELS) is one of the several critical challenges associated with electron magnetic circular dichroism (EMCD) experiments. If the experiments are performed by scanning a nanometer to atomic-sized electron probe on a specific region of a sample, the precision of the local magnetic information extracted from such data highly depends on the accuracy of the spatial registration between multiple scans. For an EMCD experiment in a 3-beam orientation, this means that the same specimen area must be scanned four times while keeping all the experimental conditions same.

SERS Hotspot Engineering by Aerosol Self-Assembly of Plasmonic Ag Nanoaggregates with Tunable Interparticle Distance.

Surface-enhanced Raman scattering (SERS) is a powerful sensing technique. However, the employment of SERS sensors in practical applications is hindered by high fabrication costs from processes with limited scalability, poor batch-to-batch reproducibility, substrate stability, and uniformity. Here, highly scalable and reproducible flame aerosol technology is employed to rapidly self-assemble uniform SERS sensing films.

Plasmonic Coupling in Silver Nanoparticle Aggregates and Their Polymer Composite Films for NearInfrared Photothermal Biofilm Eradication.

Plasmonic nanoparticles with near-IR (NIR) light absorption are highly attractive in biomedicine for minimally invasive photothermal treatments. However, these optical properties are typically exhibited by plasmonic nanostructures with complex, nonspherical geometries that may prohibit their broad commercialization and further integration into photothermal devices. Herein, we present the single-step aerosol self-assembly of plasmonic nanoaggregates that consisted of spherical silver nanoparticles with tunable extinction from visible to NIR wavelengths.

: towards cross-platform automated continuous rotation electron diffraction.

A script, , has been developed to facilitate rapid automated 3D electron diffraction/microcrystal electron diffraction data acquisition by continuous rotation of a crystal with a constant speed, denoted as continuous rotation electron diffraction. The script coordinates microscope functions, such as stage rotation, and camera functions relevant for data collection, and stores the experiment metadata. The script is compatible with any microscope that can be controlled by and has been tested on both JEOL and Thermo Fisher Scientific microscopes.

Dissecting complex nanoparticle heterostructures via multimodal data fusion with aberration-corrected STEM spectroscopy.

With nanostructured materials such as catalytic heterostructures projected to play a critical role in applications ranging from water splitting to energy harvesting, tailoring their properties to specific tasks requires an increasingly comprehensive characterization of their local chemical and electronic landscape. Although aberration-corrected electron spectroscopy currently provides sufficient spatial resolution to study this space, an approach to concurrently dissect both the electronic structure and full composition of buried metal/oxide interfaces remains a considerable challenge. In this manuscript, we outline a statistical methodology to jointly analyze simultaneously-acquired STEM EELS and EDX datasets by fusing them along their shared spatial factors.

Structural evolution of CrN nanocube electrocatalysts during nitrogen reduction reaction.

Metal nitrides have been suggested as prospective catalysts for the electrochemical nitrogen reduction reaction (NRR) in order to obtain ammonia at room temperature under ambient pressure. Herein, we report that templated chromium nitride porous microspheres built up by nanocubes (NCs) are an efficient noble-metal-free electrocatalyst for NRR. The CrN NCs catalyst exhibits both a high stability and NH3 yield of 31.

: Hybrid Cellulose-Bismuth Oxybromide Membrane for Pollutant Removal.

The simultaneous removal of organic and inorganic pollutants from wastewater is a complex challenge and requires usually several sequential processes. Here, we demonstrate the fabrication of a hybrid material that can fulfill both tasks: (i) the adsorption of metal ions due to the negative surface charge, and (ii) photocatalytic decomposition of organic compounds. The bioinorganic hybrid membrane consists of cellulose fibers to ensure mechanical stability and of BiOBr/BiOBr nanosheets.

Nanostructured core-shell metal borides-oxides as highly efficient electrocatalysts for photoelectrochemical water oxidation.

Oxygen evolution reaction (OER) catalysts are critical components of photoanodes for photoelectrochemical (PEC) water oxidation. Herein, nanostructured metal boride MB (M = Co, Fe) electrocatalysts, which have been synthesized by a Sn/SnCl redox assisted solid-state method, were integrated with WO thin films to build heterojunction photoanodes. As-obtained MB modified WO photoanodes exhibit enhanced charge carrier transport, amended separation of photogenerated electrons and holes, prolonged hole lifetime and increased charge carrier density.

Single-pass STEM-EMCD on a zone axis using a patterned aperture: progress in experimental and data treatment methods.

Measuring magnetic moments in ferromagnetic materials at atomic resolution is theoretically possible using the electron magnetic circular dichroism (EMCD) technique in a (scanning) transmission electron microscope ((S)TEM). However, experimental and data processing hurdles currently hamper the realization of this goal. Experimentally, the sample must be tilted to a zone-axis orientation, yielding a complex distribution of magnetic scattering intensity, and the same sample region must be scanned multiple times with sub-atomic spatial registration necessary at each pass.

Silicoaluminophosphate (SAPO)-Templated Activated Carbons.

Microporous activated carbon was prepared by depositing and pyrolyzing propylene within the microporous voids of SAPO-37 and subsequently removing the template by a treatment with HCl and NaOH. The carbon had a high surface area and large micropore and ultramicropore volumes. The yield, crystallinity, morphology, and adsorption properties compared well with those of a structurally related zeolite-Y-templated carbon.

Towards implementing hierarchical porous zeolitic imidazolate frameworks in dye-sensitized solar cells.

A one-pot method for encapsulation of dye, which can be applied for dye-sensitized solar cells (DSSCs), and synthesis of hierarchical porous zeolitic imidazolate frameworks (ZIF-8), is reported. The size of the encapsulated dye tunes the mesoporosity and surface area of ZIF-8. The mesopore size, Langmuir surface area and pore volume are 15 nm, 960-1500 m · g and 0.

Mössbauerite as Iron-Only Layered Oxyhydroxide Catalyst for WO Photoanodes.

Mössbauerite, a trivalent iron-only layered oxyhydroxide, has been recently identified as an electrocatalyst for water oxidation. We investigated the material as potential cocatalyst for photoelectrochemical water oxidation on semiconductor photoanodes. The band edge positions of mössbauerite were determined for the first time with a combination of Mott-Schottky analysis and UV-vis diffuse reflectance spectroscopy.

Quaternary Core-Shell Oxynitride Nanowire Photoanode Containing a Hole-Extraction Gradient for Photoelectrochemical Water Oxidation.

A nanowire photoanode SrTaON, a semiconductor suitable for overall water-splitting with a band gap of 2.3 eV, was coated with functional overlayers to yield a core-shell structure while maintaining its one-dimensional morphology. The nanowires were grown hydrothermally on tantalum, and the perovskite-related oxynitride structure was obtained by nitridation.

Proposal for Measuring Magnetism with Patterned Apertures in a Transmission Electron Microscope.

We propose a magnetic measurement method utilizing a patterned postsample aperture in a transmission electron microscope. While utilizing electron magnetic circular dichroism, the method circumvents previous needs to shape the electron probe to an electron vortex beam or astigmatic beam. The method can be implemented in standard scanning transmission electron microscopes by replacing the spectrometer entrance aperture with a specially shaped aperture, hereafter called a ventilator aperture.

The usage of data compression for the background estimation of electron energy loss spectra.

Quantitative analysis of noisy electron spectrum images requires a robust estimation of the underlying background signal. We demonstrate how modern data compression methods can be used as a tool for achieving an analysis result less affected by statistical errors or to speed up the background estimation. In particular, we demonstrate how a multilinear singular value decomposition (MLSVD) can be used to enhance elemental maps obtained from a complex sample measured with energy electron loss spectroscopy.

Towards sub-nanometer real-space observation of spin and orbital magnetism at the Fe/MgO interface.

While the performance of magnetic tunnel junctions based on metal/oxide interfaces is determined by hybridization, charge transfer, and magnetic properties at the interface, there are currently only limited experimental techniques with sufficient spatial resolution to directly observe these effects simultaneously in real-space. In this letter, we demonstrate an experimental method based on Electron Magnetic Circular Dichroism (EMCD) that will allow researchers to simultaneously map magnetic transitions and valency in real-space over interfacial cross-sections with sub-nanometer spatial resolution. We apply this method to an Fe/MgO bilayer system, observing a significant enhancement in the orbital to spin moment ratio that is strongly localized to the interfacial region.

Analysis of electron energy loss spectroscopy data using geometric extraction methods.

A set of geometric data decomposition methods is discussed. In particular, randomized vertex component analysis (RVCA), an extension of vertex component analysis (VCA) for the application to noisy data, is established. Minimum volume simplex analysis (MVSA), a recent technique for the extraction of endmembers in the absence of pure pixels, is presented.

Quantitative analysis of magnetic spin and orbital moments from an oxidized iron (1 1 0) surface using electron magnetic circular dichroism.

Understanding the ramifications of reduced crystalline symmetry on magnetic behavior is a critical step in improving our understanding of nanoscale and interfacial magnetism. However, investigations of such effects are often controversial largely due to the challenges inherent in directly correlating nanoscale stoichiometry and structure to magnetic behavior. Here, we describe how to use Transmission Electron Microscope (TEM) to obtain Electron Magnetic Circular Dichroism (EMCD) signals as a function of scattering angle to locally probe the magnetic behavior of thin oxide layers grown on an Fe (1 1 0) surface.